salva95 Posted June 12, 2008 Share Posted June 12, 2008 (edited) se attaco una periferca usb prima di avviare funziona ma se la attacco dopo o la stacco e la riattacco non funziona. ecco il mio hw: Mainboard : Acer GrapevineChipset : Intel i945GM Processor : Intel Core 2 Duo Mobile T5500 @ 1666 MHz Physical Memory : 1024 MB (2 x 512 DDR2-SDRAM ) Video Card : Intel Corporation Mobile 945GM/GU Express Integrated Graphics Controller Hard Disk : ST9120822A (120 GB) DVD-Rom Drive : HL-DT-ST DVDRAM GSA-T10N Monitor Type : AUO - 15 inches Network Card : Intel Corporation PRO/Wireless 3945ABG Queste sono le potrte: Port installed : Intel® 82801G (ICH7 Family) USB Universal Host Controller - 27C8 Port installed : Intel® 82801G (ICH7 Family) USB Universal Host Controller - 27C9 Port installed : Intel® 82801G (ICH7 Family) USB Universal Host Controller - 27CA Port installed : Intel® 82801G (ICH7 Family) USB Universal Host Controller - 27CB Port installed : Intel® 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC grazie per tutti quelli che mi aiuteranno Edited June 15, 2008 by salva95 Usa solo questo topic per questo problema! Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/ Share on other sites More sharing options...
Daveta Posted June 12, 2008 Share Posted June 12, 2008 salva, cerca nel forum, è un errore correggibile, è anche molto comune. ot: metti il banner...dai! Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780420 Share on other sites More sharing options...
salva95 Posted June 12, 2008 Author Share Posted June 12, 2008 ok grazie mo sto proprio cercando ho trovato un topic dove dice di cambiare kernel mo provero Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780431 Share on other sites More sharing options...
Daveta Posted June 12, 2008 Share Posted June 12, 2008 vedi? bravo, cercando si risolve il 99% della questione!!!! Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780434 Share on other sites More sharing options...
salva95 Posted June 12, 2008 Author Share Posted June 12, 2008 scusate credevo sdi aver risolto invece no ,ho provato a cambiare il kernel e niente,allora ho provato a installare fix usb1.3 ma niente esistono altre soluzioni-?? scusat prima ho sbaito ed ho aperto un altro topick fortuna e l'hanno kiuso Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780512 Share on other sites More sharing options...
salva95 Posted June 12, 2008 Author Share Posted June 12, 2008 up! Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780572 Share on other sites More sharing options...
lord_muad_dib Posted June 12, 2008 Share Posted June 12, 2008 non uppare così spesso, e non aprire 10 discussioni x lo stesso problema, da una occhiata alle regole, grazie Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780599 Share on other sites More sharing options...
salva95 Posted June 12, 2008 Author Share Posted June 12, 2008 ok mo lo leggo grazie Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780642 Share on other sites More sharing options...
haven Posted June 12, 2008 Share Posted June 12, 2008 haimè ho avuto lo stesso identico problema postato ( http://forum.insanelymac.com/index.php?showtopic=109904 ) ma con zero risposte. cmq.... io ho reinstallato la kalyway e fatto subito update a 10.5.3. ora mi funziona tutto. Visto che ci sto ma ad oggi le uniche cose che non funzonano sono lo sleep del pc e dello schermo e la batteria senza durata in minuti?????? grazie. Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780673 Share on other sites More sharing options...
salva95 Posted June 12, 2008 Author Share Posted June 12, 2008 anke a me da problemi lo sleep mentre la batterie e ok grazie mo prova ad aggiornare Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-780691 Share on other sites More sharing options...
salva95 Posted June 12, 2008 Author Share Posted June 12, 2008 ho aggiornato alla 10.5.3 ma le porte non funziano lo stsso Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-781101 Share on other sites More sharing options...
andreiano Posted June 12, 2008 Share Posted June 12, 2008 un'idea potrebbe essere quella di lasciare inserita una chiave usb nel pc durante l'installazione. magari riconoscendo la periferica, installerà automaticamente il gestore delle usb o quello che è. comunque cambiare il kerell si , ma in fase di installazione. infatti io ho avuto lo stesso problema e cambiando il kernell in post installazione non è servito. ho duvuto reintallare e li ho cambiato kernell. (speedsleep). ma io ho un pavilion intel. Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-781192 Share on other sites More sharing options...
salva95 Posted June 12, 2008 Author Share Posted June 12, 2008 grazie andreiano adesso provero a reinstallare tutto tanto gia appena installato funzionava quasi tutto tranne 2 o tre cose che sono riuscito a risolvere tranne questo delle usb , grazie a tutti per il vostro aiuto e spero di non aver disturbato e chiedo scusa per aver aperto un topic inutile prima che e stato chiuso dai mod(per fortuna) ma non sono molto abituato ai forum, di solito in windows tutte ste cose riuscivo a risolvermele da solo grazie a tutti Spero di non aver rotto le palle a nessuno aprendo sto topic(midral) Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-781222 Share on other sites More sharing options...
Iceman Posted June 13, 2008 Share Posted June 13, 2008 Hai provato ad aprire il terminale, diventare root (con "su" oppure dando "sudo su" e mettendo la password), poi sei andato sotto (cd) /System/Library/Extensions e lanciato il comando: kextload IOUSBMassStorageClass.kext Scommettiamo che se lo lanci e POI attacchi qualsiasi penna/hd usb ti funziona? Io invece vorrei capire come automatizzare il caricamento di questa (ed altre) kext che incomprensibilmente non vengono caricate all'avvio (cancellare il Extensions.mkext non risolve...) Fammi sapere Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-781377 Share on other sites More sharing options...
salva95 Posted June 13, 2008 Author Share Posted June 13, 2008 mo provo , ma mi sa che devo formattare tutto xke mia sorella a inkasinato tt Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-781753 Share on other sites More sharing options...
beeboo Posted June 13, 2008 Share Posted June 13, 2008 Io invece vorrei capire come automatizzare il caricamento di questa (ed altre) kext [cut] devi editare rc.local ciao Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-782063 Share on other sites More sharing options...
Iceman Posted June 14, 2008 Share Posted June 14, 2008 in realtà mi aspetterei che il sistema da solo le rilevasse... Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-782777 Share on other sites More sharing options...
salva95 Posted June 15, 2008 Author Share Posted June 15, 2008 ho provato a fare come dice iceman ma niente il terminale mi dice che la caricato con sucesso ma anche se inserisco una pennina usb non la carica Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-784426 Share on other sites More sharing options...
iPablos Posted June 15, 2008 Share Posted June 15, 2008 ho provato a fare come dice iceman ma niente il terminale mi dice che la caricato con sucesso ma anche se inserisco una pennina usb non la carica http://forum.insanelymac.com/index.php?showtopic=110580 segui quel link e vedi un poco Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-784526 Share on other sites More sharing options...
salva95 Posted June 15, 2008 Author Share Posted June 15, 2008 nada, non ho risolto Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-784712 Share on other sites More sharing options...
iPablos Posted June 15, 2008 Share Posted June 15, 2008 nada, non ho risolto anche provando tutte le soluzione nel post internazionale?? Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-784741 Share on other sites More sharing options...
salva95 Posted June 15, 2008 Author Share Posted June 15, 2008 si le ho provate tutte e mi dice che è nadato tutto bene poivado ad attacare una periferica usb e niente ho provato a riaviare e lo stesso non funzionava Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-784752 Share on other sites More sharing options...
salva95 Posted June 16, 2008 Author Share Posted June 16, 2008 up! Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-785336 Share on other sites More sharing options...
kaiou Posted June 16, 2008 Share Posted June 16, 2008 La versione del kernel che esegui (da terminale: uname -a) coincide con i contenuti di Info.plist di System.kext (/System/library/Extensions) ???? Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-785447 Share on other sites More sharing options...
salva95 Posted June 16, 2008 Author Share Posted June 16, 2008 si ho controllato anke quello Link to comment https://www.insanelymac.com/forum/topic/110147-porte-usb-non-funzionano/#findComment-785468 Share on other sites More sharing options...
Recommended Posts