harcker Posted February 14, 2008 Share Posted February 14, 2008 I'm using IBM T60p which has ATI X1650 onboard and I made it full working under Atok OS 10.5.1 I have successfully upgraded to 10.5.2, but then I found my video card QE/CI no longer working. I do restore the ATIinject.kext and ATIRadonX1000.kext backup, then when I boot I can only get an blank light blue screen with a mouse! Nothing more will displayed. I wonder is there any other file I might need to restore or any tips? thanks. Link to comment Share on other sites More sharing options...
Jadestone Posted February 14, 2008 Share Posted February 14, 2008 when you hook up another monitor does your display work? I have noticed on a few machines that i have done the update to that this is the case. I have no fix nor have i been able to find one but I know i am not the only person with this issue. It seems that it does not reconize the notbooks monitor. I would do that check to see if this is the issue. Link to comment Share on other sites More sharing options...
harcker Posted February 14, 2008 Author Share Posted February 14, 2008 I think it recognized the notebook monitor but the driver is not working proper. Link to comment Share on other sites More sharing options...
Dennny Posted February 14, 2008 Share Posted February 14, 2008 I have a asus motherboard p5pl2 p-4 3.4ghz HT video card geforce 6600 everthing works fine but i get no audio can someone help me i update to 10.5.2 but still no audio can someone help please also when i try to do bootcamp says boot rom needs to be update also get the blank screen for a bit them comes up did the video card update fine Link to comment Share on other sites More sharing options...
austinsnyc Posted February 14, 2008 Share Posted February 14, 2008 the problem is simple! i hope you had a backup of you AppleIntelIntegratedframeBufer.kext! some machines wont run the stock one and need to use a hacked one such as the one from the BrazilMac postPatch. replace that kext with the one from the post patch and it will be working again. Also unless you have a guid pertition setup bootcamp wont run. search the forum and you will find some more info about this. Link to comment Share on other sites More sharing options...
Dennny Posted February 14, 2008 Share Posted February 14, 2008 thanks austinsnyc i dont have a back up and i have a MBR partition i will have to do it again Link to comment Share on other sites More sharing options...
austinsnyc Posted February 14, 2008 Share Posted February 14, 2008 you can always edit the kexts through terminal using the DVD and USB stick.. Link to comment Share on other sites More sharing options...
Dennny Posted February 14, 2008 Share Posted February 14, 2008 how Link to comment Share on other sites More sharing options...
kwjenkins Posted February 15, 2008 Share Posted February 15, 2008 this happened to me on the partion that I had installed 1.5.2, then the graphics update, luckily I have a tester partition which didn't get hosed, but I re-installed the above mentioned kext, as well as all the g950 kext and plugs from my working build, but Im still only getting external monitor joy, which isnt' very laptop condusive. Any suggestions on what to try next would be appreciated. thanks kenny Link to comment Share on other sites More sharing options...
CowboyMiller Posted February 16, 2008 Share Posted February 16, 2008 here was my fix, had ToH 10.5.1 did a Kalyway 10.5.2 update and i got the blue screen, then i thought, then, something is happeneing cuz its not frozen, mh HD was going nuts, I plugged in an external montitor and whaa laa, there was leopard all mirrored, so after the 10.5.2 update, i ran the graphics update, and after 2 reboots, whaa laaa, now i have LCD display and extened VGA support....so mabe try that? now all i need are audio and wireless support.... Link to comment Share on other sites More sharing options...
Nizam Posted August 13, 2008 Share Posted August 13, 2008 I have the same problem -- blank light blue screen with mouse pointer and sound after installing All4Leo v2 10.5.2 I have Ati x1600 256mb video adapter - DVI cable with monitor What i should do to fix this problem ? Link to comment Share on other sites More sharing options...
Recommended Posts