131 replies to this topic

[htraty]

HEY ALL,

I want ASUS M@N_MX MOtherboard drivers i have kalaway 10.5.2 mac osx

so pls help me

[sugarmac]

Hi

Does anyone has DLink DFE 520TX working in OS X 10.5.5 ?? It was working when I had IDeneb 1.3 but since when I installed Leo Retail its not working.... Can someone help me please ?

Thanks

[molly]

Those drivers on the realtek site do not work for the RTL8110S.  Despite the fact that the page says the drivers are for that chipset, when you run the installer it only lists

8169S (SB)
8168 (B/C/CP)
8101
8102E

Tried it with my ECP 945P-A motherboard with the RTL8110S chipset Kalyway 10.5.2, kernel 9.2.0 and no luck.

[Macmania]

I have installed the forcedeth.kext and Mac recognises my ethernet card, but i can't connect to the internet. Not with automatic neither manual configuration. The little button turns to green and it says I have ip-adress 165.xxx.xxx.xxx (don't know the exact adress). But normally (in windows) it's always 192.168.1.10x. It says I am connected but Safri still doesn't work.
Does anyone have a solution - This was orginally posted by Flake I'm having the same problem if anyone could help I'd definitely appreciate it. I have a hp pavilion slimline s7700n Kalyway OSX 10.5.2

[digital_dreamer]

Macmania, on Dec 18 2008, 10:37 PM, said:

I have installed the forcedeth.kext and Mac recognises my ethernet card, but i can't connect to the internet. Not with automatic neither manual configuration. The little button turns to green and it says I have ip-adress 165.xxx.xxx.xxx (don't know the exact adress). But normally (in windows) it's always 192.168.1.10x. It says I am connected but Safri still doesn't work.
Does anyone have a solution - This was orginally posted by Flake I'm having the same problem if anyone could help I'd definitely appreciate it. I have a hp pavilion slimline s7700n Kalyway OSX 10.5.2

That 165.etc. is a fake address.
Since it doesn't appear to be grabbing an IP from the router via DHCP, you should use a static IP that's outside the range of your DHCP pool (as configured in you router). Does your system connect to your LAN at all? Can you connect to your router via 192.168.x.1? If you can, but don't have internet access, it may be a DNS issue, try inputting the DNS #s (from your ISP) in your Ethernet panel and see if it connects.

regards,
MAJ

[Scholesy18]

Marvell 88E1116 doesn't work. Computer freezes after 5 minutes.

[zair]

SIS 190 100/10 the driver? (SIS 190 100/10 = BCM AC131)

[hackaroni]

Thanks folks...the Intel link worked for me (HP Pavilion s7410n, JaS 10.4.8, with NIC Intel 82562GT)

I used Mactigre's kext: http://forum.insanel...t...st&id=12139

[bcolumbia]

The Broadcom 57xx Links are down :[

[Ambassad0r]

joeyalaiza, on Jan 25 2008, 07:52 AM, said:

i've got Broadcom Corporation NetLink BCM5787M Gigabit Ethernet.

tried AppleBCM5751Ethernet.kext.zip but didn't work. anyone has solution for this?

BTW, i've got iAtkos working on Acer Aspire 4710.
Thanks!

Please tell me if you have found a solution!
THANKS

bcolumbia, on Mar 3 2009, 09:41 PM, said:

The Broadcom 57xx Links are down :[

Yeah!!
Please advice!

[joshmach]

Hello everybody,

i made my broadcom  5755 card work on my dell latitude d630 laptop using AppleBCM5751Ethernet.kext. Immediately after the installation using kext helper, the leo4allv3final installation recognized the network card and asked  the configuration.

Now its working. Thanks for this kext

[orocimaru]

Hello
i got Realtek RTL8102e
You think drivers for Realtek 8169/8168/8110/8111/8100/8101  will be good for me?

Thanks

[msingh]

Are there any 64 bit drivers for BCM5751 ?

[Synthetic]

Anyone else found a solution with 82567 at Snow Leopard 10.6 in 64-bit mode?

[megadrilo]

Hello, Someone have a solution for 82578DC Lan DP55WB Snow Leopard?

Thanks

[majesty]

Dear All
please help me I want a driver for Linksys wireless-G PCI adaptor ( WMP54G) 1.4V for Mac. please please

[cclloyd9785]

Do you have the Realtek RTL 1839 for snow leopard instead of tiger?

[jdleung]

I still cannot get this work on samsung r428

[purity2010]

thanks that should solve my ethernet problem