axel9546 Posted May 14, 2017 Author Share Posted May 14, 2017 Questo è loutput dell AppleIntelInfo.kext Last login: Sun May 14 09:04:05 on console MBP-di-Danilo:~ danilo$ /Users/danilo/Desktop/AppleIntelInfo.kext.command ; exit; Password: AppleIntelInfo.kext v2.5 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 1 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x480745ba57a (206 MHz) MWAIT C-States...........................: 286531872 Processor Brandstring....................: Intel® Core i5-6200U CPU @ 2.30GHz Processor Signature..................... : 0x406E3 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 3 - Model................................ : 0x4E (78) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF80325BB300 ------------------------------------------ - Core Count........................... : 2 - Thread Count......................... : 4 MSR_PLATFORM_INFO................(0xCE) : 0x4043DF1011800 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x18 (2400 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 4 - Minimum Operating Ratio.............. : 4 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x1E008006 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 0 (not enabled) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x51814 ------------------------------------------ - LVL_2 Base Address................... : 0x1814 - C-state Range........................ : 5 (C-States not included, I/O MWAIT redirection not enabled) IA32_MPERF.......................(0xE7) : 0x23E7BBB2411 IA32_APERF.......................(0xE8) : 0xE1250C0335 MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x1C0D00001700 ------------------------------------------ - Current Performance State Value...... : 0x1700 (2300 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x1C00 ------------------------------------------ - Target performance State Value....... : 0x1C00 (2800 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x10 ------------------------------------------ - High-Temperature Interrupt Enable.... : 0 (disabled) - Low-Temperature Interrupt Enable..... : 0 (disabled) - PROCHOT# Interrupt Enable............ : 0 (disabled) - FORCEPR# Interrupt Enable............ : 0 (disabled) - Critical Temperature Interrupt Enable : 1 (enabled) - Threshold #1 Value................... : 0 - Threshold #1 Interrupt Enable........ : 0 (disabled) - Threshold #2 Value................... : 0 - Threshold #2 Interrupt Enable........ : 0 (disabled) - Power Limit Notification Enable...... : 0 (disabled) IA32_THERM_STATUS................(0x19C) : 0x883A0800 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 1 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 58 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x4000850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0xA640000 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 100 - TCC Activation Offset................ : 10 MSR_MISC_PWR_MGMT................(0x1AA) : 0x401CC1 ------------------------------------------ - EIST Hardware Coordination........... : 1 (hardware coordination disabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1B1B1B1C ------------------------------------------ - Maximum Ratio Limit for C01.......... : 1C (2800 MHz) - Maximum Ratio Limit for C02.......... : 1B (2700 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5 ------------------------------------------ - Power Policy Preference...............: 5 (balanced performance and energy saving) MSR_POWER_CTL....................(0x1FC) : 0x24005F ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x42809600DD8078 ------------------------------------------ - Package Power Limit #1............... : 15 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 110 (163840 milli-Seconds) - Package Power Limit #2............... : 18 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 0 (disabled) - Time Window for Power Limit #2....... : 33 (10 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x535DD69 ------------------------------------------ - Total Energy Consumed................ : 5335 Joules (Watt = Joules / seconds) MSR_PP1_POWER_LIMIT..............(0x640) : 0x0 MSR_PP1_ENERGY_STATUS............(0x641) : 0x3C9460 ------------------------------------------ - Total Energy Consumed................ : 242 Joules (Watt = Joules / seconds) MSR_PP1_POLICY...................(0x642) : 0x18 ------------------------------------------ - Priority Level....................... : 24 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x17 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x8003C MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x1800C8 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x884E MSR_PKGC6_IRTL...................(0x60b) : 0x8876 MSR_PKGC7_IRTL...................(0x60c) : 0x8894 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xCB8ECD3CF8 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0xDF2F1A5F8 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xCB8ECD3CF8 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0xDF2F1A5F8 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x137A9B5E30 MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x11076DD70 MSR_PKG_C8_RESIDENCY............(0x630) : 0x90805752F0 MSR_PKG_C9_RESIDENCY............(0x631) : 0x0 MSR_PKG_C10_RESIDENCY...........(0x632) : 0x0 MSR_PKG_C8_LATENCY..............(0x633) : 0x90805752F0 MSR_PKG_C9_LATENCY..............(0x634) : 0x0 MSR_PKG_C10_LATENCY.............(0x635) : 0x0 MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x9B0BA16 ------------------------------------------ MSR_PPERF........................(0x64E) : 0xA9F7B7F52B ------------------------------------------ - Hardware workload scalability........ : 730005501227 MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x18000000 ------------------------------------------ - PROCHOT Status....................... : 0 - Thermal Status....................... : 0 - Residency State Regulation Status.... : 0 - Running Average Thermal Limit Status. : 0 - VR Therm Alert Status................ : 0 - VR Therm Design Current Status....... : 0 - Other Status......................... : 0 - Package/Platform-Level #1 Power Limit : 0 - Package/Platform-Level #2 Power Limit : 0 - Max Turbo Limit Status............... : 0 - Turbo Transition Attenuation Status.. : 0 - PROCHOT Log.......................... : 0 - Thermal Log.......................... : 0 - Residency State Regulation Log....... : 0 - Running Average Thermal Limit Log.... : 0 - VR Therm Alert Log................... : 0 - VR Thermal Design Current Log........ : 0 - Other Status Log..................... : 0 - Package/Platform-Level #1 Power Limit : 0 - Package/Platform-Level #2 Power Limit : 1 (status bit has asserted) - Max Turbo Limit Log.................. : 1 (status bit has asserted) - Turbo Transition Attenuation Log..... : 0 HDC Supported IA32_PKG_HDC_CTL.................(0xDB0) : 0x0 IA32_PM_CTL1.....................(0xDB1) : 0x1 ------------------------------------------ HDC Allow Block..................(0xDB1) : 1 (HDC blocked) IA32_THREAD_STALL................(0xDB2) : 0x0 MSR_PKG_HDC_CONFIG...............(0x652) : 0x2 ------------------------------------------ Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper) MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0 MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0 MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x4807853A8BE MSR_PPERF........................(0x63E) : 0x1 (20) IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled) IA32_HWP_CAPABILITIES............(0x771) : 0x108171C ----------------------------------------- - Highest Performance.................. : 28 - Guaranteed Performance............... : 23 - Most Efficient Performance........... : 8 - Lowest Performance................... : 1 IA32_HWP_INTERRUPT...............(0x773) : 0x0 ------------------------------------------ - Guaranteed Performance Change........ : 0 (Interrupt generation disabled) - Excursion Minimum.................... : 0 (Interrupt generation disabled) IA32_HWP_REQUEST................(0x774) : 0x8000FF01 ----------------------------------------- - Minimum Performance................. : 1 - Maximum Performance................. : 255 - Desired Performance................. : 0 - Energy Efficient Performance........ : 128 - Activity Window..................... : 0, 0 - Package Control..................... : 0 IA32_HWP_STATUS..................(0x777) : 0x0 ----------------------------------------- - Guaranteed Performance Change....... : 0 (has not occured) - Excursion To Minimum................ : 0 (has not occured) CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 4 ( 400 MHz) Maximum non-Turbo Ratio/Frequency........: 24 (2400 MHz) Maximum Ratio/Frequency..................: 24 (2400 MHz) IGPU Info: ------------------------------------------ IGPU Current Frequency...................: 0 MHz IGPU Minimum Frequency...................: 300 MHz IGPU Maximum Non-Turbo Frequency.........: 300 MHz IGPU Maximum Turbo Frequency.............: 1000 MHz IGPU Maximum limit.......................: No Limit P-State ratio * 100 = Frequency in MHz ------------------------------------------ logout Saving session... ...copying shared history... ...saving history...truncating history files... ...completed. Deleting expired sessions...none found. [Processo completato] Link to comment Share on other sites More sharing options...
Recommended Posts