aria_perdana Posted April 17, 2016 Share Posted April 17, 2016 Hi, has anybody with a R7 260X can make it work in Yosemite? I'm using a MSI R7 260X (1DVI-D,1 DVI-I, 1HDMI, 1DP, connected to 1 monitor using HDMI) on 10.10.1 and can't get it to work. Searching the forum around, i've found some way such as using Fake ID (using 0x66401002) or add the device ID (0x66581002) to AMD8000Controller and AMDRadeonx4000 but both of them just give me a black screen. I've tried to patch the framebuffer using Baladi too but again it gives me the black screen (sigh ) Is there any solution for this? I'm stuck and not know what to do from this. My specs are: AMD FX8350 (no OC). ASUS M5A99X Evo R.2.0 MSI R7 260X (OC Version) Yosemite 10.10.1 This is my config.plist graphics section <key>Graphics</key> <dict> <key>DualLink</key> <integer>1</integer> <key>FBName</key> <string>Baladi</string> <key>Inject</key> <dict> <key>ATI</key> <true/> <key>Intel</key> <false/> <key>NVidia</key> <false/> </dict> <key>LoadVBios</key> <true/> <key>VRAM</key> <integer>2048</integer> <key>VideoPorts</key> <integer>4</integer> </dict> <key>KernelAndKextPatches</key> <dict> <key>ATIConnectorsController</key> <string>8000</string> <key>ATIConnectorsData</key> <string>000400000403000000010300120403030004000004030000000101001102010100040000040300000001020021030202000400000403000000010400220504040004000004030000000105001000050500040000040300000001060020010606</string> <key>ATIConnectorsPatch</key> <string>000400000403000000010300120401010008000000020000000101002205020304000000140200000001020011020304000200000402000000010400100004060004000004030000000105001000050500040000040300000001060020010606</string> Link to comment Share on other sites More sharing options...
spakk Posted April 17, 2016 Share Posted April 17, 2016 with Enoch Bootloader: 1) read the pages from here to up ... it describes how we have solved the problem, so that the graphics card works: http://www.insanelymac.com/forum/topic/285760-help-topic-for-help-in-os-x-yosemite-1010-and-below/page-130? with Clover bootloader: 2) Moreover, read here : http://www.insanelymac.com/forum/topic/298413-r9-and-r7-support-in-1010-finally/page-1 Link to comment Share on other sites More sharing options...
carlo_67 Posted April 25, 2016 Share Posted April 25, 2016 I believe your monitor goes to sleep , when you're in the black screen , try to push the power button , and sends it to sleep , then after the stop reactivates see if that's whatremove the strings in the patch Ati Connectors config.plist . the graphics section , flag: Loadvbios , Atiinject, Ports ( 2 ) not more ' , and use the DVI connector Graphics DualLink 0 FBName Baladi try changing with Exmoor Inject ATI Intel NVidia LoadVBios NvidiaSingle VRAM 2048 VideoPorts 2 Link to comment Share on other sites More sharing options...
Recommended Posts