Munkoli Posted October 24, 2014 Share Posted October 24, 2014 Please help me with this conundrum. I cannot get QE to work with my HD4000 i3 3245 CPU on 6 series board. It worked completely the first few times that I booted with NullCPUPowerManagement. Then I uninstalled it and it does not have QE. In kextstat it shows HD4000 kexts and AGPM and Capri etc. And my info shows the HD4000, but no window transparency or HD4000 selectable in OpenGL Extensions Viewer test. Now even if I reinstall NullCPUPM there is no QE. What the heck is wrong? I never got the HD4000 to work properly in Mavericks. But this time it booted up perfectly a few times, showing me that it IS possible. Please please please help! Link to comment Share on other sites More sharing options...
soarhevn Posted October 24, 2014 Share Posted October 24, 2014 Might want to try creating a DSDT for your board. See http://www.macbreaker.com/2014/03/how-to-edit-your-own-dsdt-with-maciasl.html For getting the base DSDT if you are booting with Clover, in the Clover boot screen, press F4. It will save the DSDT (along with a lot of other files) to your Clover > ACPI > origin folder. Use this as the basis to then follow the instructions. Link to comment Share on other sites More sharing options...
Munkoli Posted October 24, 2014 Author Share Posted October 24, 2014 I have tried endlessly with a DSDT. I never got the QE to return. I just reinstalled Clover 2960 and QE was back again for a few reboots. Then I tried to fix p states (using iMac13,2 with only 2 p states) and so I was using ssdtPRGen.sh to create an SSDT for myself so I could use -xcpm. Unfortunately the experiment didn't work. It knocked out the QE again. Also the 10.10 glitch patch stopped working. So I removed the SSDT.aml and changed thing back to how they were... still no QE and glitching startup. So weird!!! It seems to only work until its broken, then no matter what I try it doesnt come back on. Please any further ideas? Link to comment Share on other sites More sharing options...
Munkoli Posted October 24, 2014 Author Share Posted October 24, 2014 Anyone? Is there anyone here who has any ability to assist in this regard? This is three separate issues I have had and written about in this forum, with no real responses. At least someone can point me to a more helpful, supportive community? Link to comment Share on other sites More sharing options...
Allan Posted October 24, 2014 Share Posted October 24, 2014 Try apply patch in AICPM. And this kexts are loaded? AppleIntelFramebufferCapri, AppleIntelHD4000Graphics and AGPM Link to comment Share on other sites More sharing options...
toleda Posted October 24, 2014 Share Posted October 24, 2014 What the heck is wrong? MEI problem; HD4000 on 6 Series motherboard. OS X assumes HD4000 is on 7 Series motherboard. IOReg/@16 shows the 6 series MEI device_id: 3a1c, must be 3a1e for HD4000. Use dsdt injection (0x3a, 0x1e, 0x00, 0x00) or edit Capri/Info.plist/IOPCIPrimaryMatch/0x1E3A8086 to 0x1C3A8086 Link to comment Share on other sites More sharing options...
Munkoli Posted October 24, 2014 Author Share Posted October 24, 2014 Try apply patch in AICPM. And this kexts are loaded? AppleIntelFramebufferCapri, AppleIntelHD4000Graphics and AGPM I had already tried patched AICPM. All three kexts load. MEI problem; HD4000 on 6 Series motherboard. OS X assumes HD4000 is on 7 Series motherboard. IOReg/@16 shows the 6 series MEI device_id: 3a1c, must be 3a1e for HD4000. Use dsdt injection (0x3a, 0x1e, 0x00, 0x00) or edit Capri/Info.plist/IOPCIPrimaryMatch/0x1E3A8086 to 0x1C3A8086 I use a FakeID for MEI injection of 0x1E3A8086 for my HD4000 on 6 series. That doesn't seem to be the problem. I have also patched the DSDT for the same thing. Right now I am trying Chameleon again and I'm seeing a little progress. QE works until I load an SSDT using ssdtPRGen.sh. Then it fails again. But at least if I remove it QE comes back in Chameleon. I really need to get more than 2 P states (which is why I wanted an SSDT and hopefull -xcpm). For xcpm however, I cannot find out how to patch the mach_kernel on yosemite. I am using a tool, but it fails cos the mach_kernel isn't the same on yosemite. Any further ideas? Thanks guys. I appreciate your time. Link to comment Share on other sites More sharing options...
anonymousnbs Posted October 25, 2014 Share Posted October 25, 2014 View NVRAM BIOS = 128Mb > never full qe/ci if nvram bios = 96,64,32 > Full QE/CI > intel hd 4000 > check serial ( low and high res ) > fix config.plist Link to comment Share on other sites More sharing options...
Munkoli Posted October 25, 2014 Author Share Posted October 25, 2014 View NVRAM BIOS = 128Mb > never full qe/ci if nvram bios = 96,64,32 > Full QE/CI > intel hd 4000 > check serial ( low and high res ) > fix config.plist NVRAM BIOS is set to 64mb. Link to comment Share on other sites More sharing options...
ACDindia Posted October 25, 2014 Share Posted October 25, 2014 I have the same problem! 10.8.2 works without any issues... But post 10.8.3 update, QE/QC disappears!!! I have tried, 10.9, 10.10..... Currently I have 10.8.2 installed... But many softwares aren't supported on 10.8.2 :/ I need to upgrade to at least 10.9! Please help! My system: Dell Inspiron 7720 SE Intel 3rd Gen Core i7 3630QM Intel HM77 7 Series chipset Intel HD 4000 + 2 GB DDR5 nVidia GeForce GT 650 M Optimus (nVidia never works) Display 1920x1080 8 GB RAM Intel Capri Framebuffer = 4 Here is a screen shot of DPCI Manager...... DPCI_Manager.tiff Using PCI.IDs 2013.08.16 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) (subsys 1028:0578) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (subsys 1028:0578) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (subsys 1028:0578) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) (subsys 1028:0578) 00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04) (subsys 1028:0578) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (subsys 1028:0578) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) (subsys 1028:0578) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (subsys 1028:0578) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (subsys 1028:0578) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.4 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 [8086:1e18] (rev c4) 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) (subsys 1028:0578) 02:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0887] (rev c4) (subsys 106b:008f) Also, I am using a DSDT..... NVIDIA is disabled in it... Link to comment Share on other sites More sharing options...
Munkoli Posted October 27, 2014 Author Share Posted October 27, 2014 It would be nice if you had started your own thread for your completely unrelated problem. But before you do I can offer you some suggestions of what to try. Try removing DSDT and SSDT and just use the config file of your bootloader - you can disable NVidia from there too. I had luck with that. Also try all the different FrameBuffer numbers, also try a few different SMBios.plist's Macmini5,1 has been the best for me. Followed by iMac13,1 (although the iMac ones have serious issues with p states). Also try Mac Pro 3,1. Don't try 4,1 or 5,1 until you remove the AppleTyMCE kext. What else. Try Injecting an EDID for your monitor (look up how to do this if you don't know). Try GraphicsEnabler=Yes and =No. If you set it either way make sure to enter a graphics mode (which you already have). Good luck. Link to comment Share on other sites More sharing options...
Munkoli Posted October 27, 2014 Author Share Posted October 27, 2014 But anyway, to get back on track. Where the Pro's at? Does no one here have the expertise to engage with my problem? What are you, chicken? Parrr parrrparrrr Parrrr. Link to comment Share on other sites More sharing options...
Munkoli Posted October 27, 2014 Author Share Posted October 27, 2014 Come now. Someone must have some ideas or knowledge. Pleas share. I'm going mad here. I was under the impression you guys were more serious than the Tony dude. At least that's what all your threads imply. But i'm just not seeing much expertise here. Come forth if you can help. I can explain things further. But basically in both Clover and Chameleon QE works fine on first install and for either a couple of restarts, a couple of hours or through a couple changes of settings. After this however, on reboot the QE is permanently gone until I install the competitor bootloader. It's just really strange. I even have configurations saved from when it was working perfectly with full QE and hi fps in Open GL Extensions, and if I load those backed up configurations, the QE is still not working - until I cross install. Can someone show me some frikkin mercy please? Link to comment Share on other sites More sharing options...
mattVo Posted January 9, 2015 Share Posted January 9, 2015 Hey, I have the same problem although I'm on a 7 series motherboard, GA-Z77-DS3H. The first few times after installing the OS I get acceleration, but afterwards, nothing. HD 4000 is recognized with 1024 MB but I don't have acceleration. In kextstat AppleIntelCPUPM, AppleIntelFramebufferCapri and AppleIntelHD4000Graphics gets loaded, but not AppleGraphicsPowerManagement. Should it? I've tried using <key>ig-platform-id</key> <string>0x01620005</string> but that doesn't work. Did you ever figure it out? Thanks, Matt Link to comment Share on other sites More sharing options...
Allan Posted January 9, 2015 Share Posted January 9, 2015 Hi and Welcome to InsanelyMac Forum! Read more here: Intel HD4000 and Haswell Inject AAPL,ig-platform-id Link to comment Share on other sites More sharing options...
Recommended Posts