39 replies to this topic

[one9092002]

HI I HAVE FOLLOWING MOTHERBOARD
DFI INFINITY P965-S LGA 775 Intel P965 Express ATX

SPECS:
Model
Brand DFI Model INFINITY P965-S
Supported CPU
CPU Socket Type LGA 775 CPU Type Core 2 Quad / Core 2 Extreme / Core 2 Duo FSB 1066/800MHz Supported CPU Technologies Hyper-Threading Technology
Chipsets
North Bridge Intel P965 Express South Bridge Intel ICH8R
Memory
Number of Memory Slots 4×240pin Memory Standard DDR2 800 Maximum Memory Supported 8GB Channel Supported Dual Channel
Expansion Slots
PCI Express x16 2
CrossFire mode
PCIE 2 slot operates at x16 bandwidth.
PCIE 4 slot operates at x4 bandwidth.
Single VGA mode
Supports only one x16 bandwidth on PCIE 2. PCI Express x1 2 PCI Slots 3
Storage Devices
PATA 1 x ATA100 2 Dev. Max SATA 3Gb/s 6 SATA RAID 0/1/0+1/5 Matrix RAID
Onboard Video
Onboard Video Chipset None
Onboard Audio
Audio Chipset Realtek ALC882 High Definition audio CODEC Audio Channels 8 Channels
Onboard LAN
LAN Chipset Realtek RTL8111B PCIE Gigabit LAN Max LAN Speed 10/100/1000Mbps
Rear Panel Ports
PS/2 2 COM 1 LPT 1 USB 1.1/2.0 4 x USB 2.0 IEEE 1394 1 x IEEE 1394a S/PDIF Out 1 x Optical, 1 x Coaxial Audio Ports 6 Ports
Internal I/O Connectors
Onboard USB 3 x USB 2.0 connectors support 6 ports





I NEED HELP MAKING THE DSDT?

I HAVE NO IDEA WHERE TO START

I WANT TO INSTALL MOUNTAIN LION 10.8.1

[eep357]

DSDT — What is it and how do I get it?
DSDT patching 101
DSDT editor and patcher
http://wiki.osx86pro.../index.php/DSDT

[one9092002]

HOW DO I POST LINKS AND WHERE DO POST MY DSDT ? I MADE MY DSDT BUT WHEN I BOOT I GET BLACK SCREEN. IM RUNNING MOUNTAIN LION 10.8.1

[Gringo Vermelho]

It's hard to believe that you have been a member here since 2008. Please stop writing in all caps.

What do you mean "how do I post links"?

Click edit, then click the button that says "Use Full Editor" to upload files. DSDT must be zipped.

DSDT overriding is pointless If you haven't made any changes to your DSDT (not counting fixing compiling errors). All you are doing is overriding your DSDT with the same DSDT - nothing changes.

I doubt DSDT is the right place to fix your black screen issue.

What CPU do you have, what video card? What's your install method?

[one9092002]

I'm sorry about the caps. here my dsdt files

1st dsdt file i get video but no firewire

2. dsdt file i get black screen i don't know where I'm going wrong


I'm using dsdt editor but I'm still noobie at dsdt editing I don't know what I'm doing

core2quad q6600 2.4 ghz nvidia 8800 gt 512 mb I'm using the 3.12 ihack usb installer i can install 10.8 successful but when i update to 10.8.1 i get black screen the only way to picture on the screen if i put the yes video dsdt in my extra folder

Attached Files

•  dsdt.zip   13.07KB   1 downloads

[one9092002]

new dsdt.aml file video working with grapgicsenabler=yes flag on mountain lion 10.8.1 im still making more corrections any help would be appreciated

Attached Files

•  DSDT VIDEO working.zip   6KB   1 downloads

[eep357]

What is it that your trying to accomplish by patching DSDT? Firewire? ML already installed? So far it just looks like difference between GE=Yes and GE=No unless you added GPU injection to DSDT?

[one9092002]

i need to patch the dsdt run native powermangement ...i ran some patches but my results were = no hpet cpu not properly configured

can you help me

[eep357]

Thy this, remove any NullCPUPowermanagement.kext and enable speedstep in BIOS.

Attached Files

•  DSDT.aml.zip   6.13KB   4 downloads

[one9092002]

here is the error i got

Attached Files

•  mail.jpg   103.52KB   12 downloads

[eep357]

give this a try with it. Updated IOPCIFamily for Mountain Lion also make sure recent fakesmc installed

[one9092002]

okay no luck i got the same kernel panic and awireless errrors

[eep357]

u have unedited dsdt to upload? your south bridge ICH8 right? Also what audio codec? Upload lspci output too, using -b -nn flags like this:

lspci -b -nn > ~/Desktop/lspci.txt

here is lspci.zip if you don't have it

[one9092002]

how do i use that file? can give more more specific directions on how to do it i can only boot with nullpowermangement kext

im a newbie when comes to dsdt editing but I'm learning more everyday I'm very thankful for your patience and help t

[eep357]

for clean unpatched DSDT, use windows to extract it and upload. For lspci, download from link above, double click to install, then copy/paste terminal command from above and the results will be in a text file on your desktop so you can upload that too.

[one9092002]

how to extract a clean dsdt from windows ?

im sorry im new to dsdt thank you for your help

[eep357]

http://www.aida64.com/downloads/a64xe

use that

[one9092002]

can you tell me if i did this correct here is the text file

Attached Files

•  Report.txt   88.16KB   1 downloads

[one9092002]

can you take look at the txt file?

[Gringo Vermelho]

I looked at it, it's a text file. You must extract your DSDT.