Mofo-X Posted September 7, 2006 Share Posted September 7, 2006 Greetings, Included as an attatchment in this topic is my Post-Install-Patch v1.0.2 which will allow you to fix the reboot stall some users are experiencing. This problem results in your system either hanging/stalling when selecting restart from the apple menu. You may or may not also get the grey apple spinwheel. To fix your system simply download attatched DMG, Mount, and launch MPIP102. This patch will automatically fix your system. Please restart your system after using. ++ Read the README and print if required prior to running this patch. ++ Restore instructions in README file if this does not fix your problem. MD5 Sum: 465cc079f2b892909cbd1678e853ed54 MPIP102-Reboot.Stall.Fix.dmg Regards, {censored}-X PS I would greatly appreciate if this could be made a sticky. The forum software appends a ".zip" to the download. The file is not zipped, it is a .dmg.Simply Rename and Remove the ".zip" from the file name. Leave the ".dmg" MPIP102_Reboot.Stall.Fix.dmg Link to comment Share on other sites More sharing options...
wondergod Posted September 7, 2006 Share Posted September 7, 2006 you're on a roll tonight, eh? Link to comment Share on other sites More sharing options...
Mofo-X Posted September 7, 2006 Author Share Posted September 7, 2006 The SMB fix was technically done a few days ago. Just finishing cosmetics etc. The reboot fix was on a whim. Needed something to do whle hanging on IRC Link to comment Share on other sites More sharing options...
danners Posted October 17, 2006 Share Posted October 17, 2006 this is great. Thanks for the hard work. Link to comment Share on other sites More sharing options...
Glenmore Posted December 13, 2006 Share Posted December 13, 2006 Patch works for AMD Athlon 64 2800+ Socket 754. no more restart problem. Dunno about Shutdown though. Haven't used. Rarely shuts down my computer anyway.... Link to comment Share on other sites More sharing options...
NeODuG Posted December 14, 2006 Share Posted December 14, 2006 This happends to me on the "finishing up" bit of the installer. Where it says reboot. I click it and i get the grey spinning wheel below the instaler box and nothing happends if i do a hard reboot i get an error message and it wont let me go any further. Any idea on how to solve? Link to comment Share on other sites More sharing options...
jspiker Posted December 15, 2006 Share Posted December 15, 2006 Tested on: Athlon x2 4200 MSI Neo4-f Does not work, wrecks install to the point where you cant boot into single user mode. Link to comment Share on other sites More sharing options...
ipguy Posted December 29, 2006 Share Posted December 29, 2006 excellent work, that did the trick !!! thanks {censored}-x! Greetings, Included as an attatchment in this topic is my Post-Install-Patch v1.0.2 which will allow you to fix the reboot stall some users are experiencing. This problem results in your system either hanging/stalling when selecting restart from the apple menu. You may or may not also get the grey apple spinwheel. To fix your system simply download attatched DMG, Mount, and launch MPIP102. This patch will automatically fix your system. Please restart your system after using. ++ Read the README and print if required prior to running this patch. ++ Restore instructions in README file if this does not fix your problem. MD5 Sum: 465cc079f2b892909cbd1678e853ed54 MPIP102-Reboot.Stall.Fix.dmg Regards, {censored}-X PS I would greatly appreciate if this could be made a sticky. Link to comment Share on other sites More sharing options...
sandrogalli Posted January 12, 2007 Share Posted January 12, 2007 Does not work, wrecks install to the point where you cant boot into single user mode. Happened to me too. Is there any way to fix this? Please help, I was just finishing up a near perfect system! Link to comment Share on other sites More sharing options...
sandrogalli Posted January 13, 2007 Share Posted January 13, 2007 i do not recommend this patch, it seems to be severely flawed and will kill your kernel. The recovery instructions included do not work as the system is unable to boot in single user mode. however, i was able to recover the system by booting the backup kernel at the Darwin bootloader, simply issue "mach_kernel.102" or whatever you named your backup. Link to comment Share on other sites More sharing options...
ila225 Posted January 21, 2007 Share Posted January 21, 2007 Greetings, Included as an ... ... ... {censored}-X PS I would greatly appreciate if this could be made a sticky. Hi there! Great idea, but, sorry to tell you that it killed my system also. I had to use my DVD to get it back. Maybe because I'm AMD. I don't know, but tks anyway. Link to comment Share on other sites More sharing options...
iCrash Posted January 25, 2007 Share Posted January 25, 2007 It killed mine as well using an Intel Core Duo. I don't mind though; the sound and wired/wireless ethernet did not work anyway. Link to comment Share on other sites More sharing options...
zSpudatoX Posted February 17, 2007 Share Posted February 17, 2007 (edited) Hi, it seems to have killed my thing aswell however, i was able to recover the system by booting the backup kernel at the Darwin bootloader, simply issue "mach_kernel.102" this worked for me so now i can boot into os x fine is there anyway to fix the issue though? like my system just reboots itself everytime after the darwin 10sec countdown unless i do the mach_kernel.102 command to boot into that backup, so is there a way i can restore the backup? thanks Edited February 17, 2007 by zSpudatoX Link to comment Share on other sites More sharing options...
loonymonkey Posted March 1, 2007 Share Posted March 1, 2007 Anyone have a solution that doesn't break the system? Link to comment Share on other sites More sharing options...
DaFunkiestMonkey Posted March 2, 2007 Share Posted March 2, 2007 didn't fix it, didn't break it... sad. Link to comment Share on other sites More sharing options...
ulyanov77 Posted March 18, 2007 Share Posted March 18, 2007 can someone please help me recover my system!?!? The patch messed up and when I try and boot into osx it crashes soon after the grey screen.... when i try and boot with -s it imediately crashes.... the same thing happens when trying to boot off of the install disc. I also tried typing mach_kernal.102 at darwin but this does nothing... can anyone help!?? I had (nearly) everything set up perfectly and would rather not go through that again.. thanks! Link to comment Share on other sites More sharing options...
loonymonkey Posted March 18, 2007 Share Posted March 18, 2007 I didn't try this patch, but my reboot issue was solved after installing OSX to my SATA drive using the VMWare to Native guide. "About this MAC" also works for me now Link to comment Share on other sites More sharing options...
z1f02007 Posted March 18, 2007 Share Posted March 18, 2007 i do not recommend this patch, it seems to be severely flawed and will kill your kernel. The recovery instructions included do not work as the system is unable to boot in single user mode. Did the same thing to me. I had to reinstall everything from scratch. DONT RUN THIS PATCH.... virgin user. Link to comment Share on other sites More sharing options...
ulyanov77 Posted March 18, 2007 Share Posted March 18, 2007 Well, I feel stupid... the reason I couldn't just type and load the kernel backup was because I was mispelling it.... anywho, I'm now running my backup kernel, but unfortunately Shut Down causes the same error as reboot now (didn't before) so I have to do a hard power off each time.. not necessarily a good thing for my computer, any ideas? Link to comment Share on other sites More sharing options...
Droid Posted March 19, 2007 Share Posted March 19, 2007 Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers Next time i will read all the post answers ... Broke my entirely system, this is {censored}. Link to comment Share on other sites More sharing options...
tErbo b00st Posted April 12, 2007 Share Posted April 12, 2007 ^^^^ what he said ok, I got back into OS x by typing "mach_kernel.102 -v" Link to comment Share on other sites More sharing options...
cdbeshore Posted April 20, 2007 Share Posted April 20, 2007 killed my system too (JAS 10.4.8, Dell E1705 Core Duo). I had to reboot, type in the backup kernel at the boot prompt (mach_kernel.102). Once booted, run the following commands from the root directory: sudo -s rm mach_kernel cp mach_kernel.102 mach_kernel chown root:wheel mach_kernel chmod 644 mach_kernel then reboot... for whatever reason my broadcom 440 quit working with this too. I had to reinstall it again based on thread #41663. don't know if that was related or not. Link to comment Share on other sites More sharing options...
lucasd2001 Posted August 14, 2007 Share Posted August 14, 2007 THIS IS {censored}!! I BROKE MY ENTIRE SYSTEM HAD TO RE INSTALL EVERYTHING AGAIN!!!!!!! I HATE THIS Link to comment Share on other sites More sharing options...
gimpyviper Posted August 14, 2007 Share Posted August 14, 2007 Ok definitely not going to install this now... What kind of machine is everyone running? I'm on a Tyan K8WE S2895 dual Opteron/NForce4 ASUS X1900XTX I only get the reboot problem when I have USB enabled. If I use PS2 mice/keyboard no reboot problems. (And no USB support... strange) Link to comment Share on other sites More sharing options...
PIKACHU89 Posted August 27, 2008 Share Posted August 27, 2008 reset is not , SHUTDOWN --> reset ? help me ? how to fix shutdown ? thanks !!! Link to comment Share on other sites More sharing options...
Recommended Posts