1349 replies to this topic

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 02:05 PM, said:

Only thing I'm not sure where to get are the drivers or kernels for my video,sound, and wireless cards.

what is your lap

[pepsiblast08]

PC specs I'm putting OS on is:

Graphics-
Graphics Controller:   NVIDIA GeForce 8300
Video Memory: Shared video memory (UMA)

Audio-
Audio Output:   Sound card
Audio Codec: VIA VT1708B
Sound Output Mode: 7.1 channel surround
Compliant Standards: High Definition Audio

Processor-
Type / Form Factor AMD Phenom II X3 710
Multi-Core Technology Triple-Core
64-bit Computing Yes
Processor Qty 1
Clock Speed 2.6 GHz
Compatible Processor Socket Socket AM3
Manufacturing Process 45 nm
Thermal Design Power 95 W

Wireless-
TRENDnet TEW 643PI - network adapte

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 01:41 PM, said:

PC specs I'm putting OS on is:

Graphics-
Graphics Controller:   NVIDIA GeForce 8300
Video Memory: Shared video memory (UMA)

Audio-
Audio Output:   Sound card
Audio Codec: VIA VT1708B
Sound Output Mode: 7.1 channel surround
Compliant Standards: High Definition Audio

Processor-
Type / Form Factor AMD Phenom II X3 710
Multi-Core Technology Triple-Core
64-bit Computing Yes
Processor Qty 1
Clock Speed 2.6 GHz
Compatible Processor Socket Socket AM3
Manufacturing Process 45 nm
Thermal Design Power 95 W

Wireless-
TRENDnet TEW 643PI - network adapte

first setup it then we talk about kexts
what about your wireless chipest  
may not work if there no kexts for it
what is the name of your MB

[pepsiblast08]

On my laptop, it hangs at the scrolling txt so prolly won't do it on this. My PC that I wanna do it on is the specs I listed above. The MB is an ASUS.

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 02:34 PM, said:

On my laptop, it hangs at the scrolling txt so prolly won't do it on this. My PC that I wanna do it on is the specs I listed above. The MB is an ASUS.

i want name of motherboard what next to asus

[pepsiblast08]

m3n78-vm

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 03:07 PM, said:

m3n78-vm

audio and lan will work
gfx not sure about onboard gfx

[pepsiblast08]

Thanks for the info again. We need more people like you helping in forums. You have been more helpful than anyone else.

[pepsiblast08]

When I try to install it hangs at "System uptime in nanoseconds:" And then it has a 9 digit number. Do I wait for it to proceed or is it frozen?

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 07:30 PM, said:

When I try to install it hangs at "System uptime in nanoseconds:" And then it has a 9 digit number. Do I wait for it to proceed or is it frozen?

take picture of this

[pepsiblast08]

Sorry don't have a good enough camera. But now I'm getting
"Error occurred (0xe00002be)
Still waiting for root device"

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 08:52 PM, said:

Sorry don't have a good enough camera. But now I'm getting
"Error occurred (0xe00002be)
Still waiting for root device"

panic
or still waiting...................
if still waiting
trun sata setting to achi
and you may use ide dvd drive so give you this message so use sata dvd

[pepsiblast08]

When I turn it to achi, I get stuck in the boot loop. Also, I don't have a SATA DVD drive. Just an IDE. Guess it's off to buy an IDE to SATA

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 09:23 PM, said:

When I turn it to achi, I get stuck in the boot loop. Also, I don't have a SATA DVD drive. Just an IDE. Guess it's off to buy an IDE to SATA

ok tomorrow we will continue because iwill need to make new boot cd with nforce kext
iam now so tired

[pepsiblast08]

Alright, it's cool. Thanks for the help this far. Take your time.

[holloweyed]

With the busratio flag I have no more issues with the restart loop. But now the install hangs after inserting the retail DVD. There are many lines of text but it ends with these last few lines:

Kernel version:
Darwin Kernel Version 10.4.0: Thu Jun 17 18:42:31 EDT 2010; annappirtrvh v4 :xnu-1504.7.4/BUILD/obj/RELEASE_I386
System model name: MacPro2,1 (Mac-F4208DC8)

System uptime in nanoseconds: 639070313

My specs are listed below. HD is in AHCI. Thanks for your help so far, this is the farthest I've gotten in a while.

 IMAG0224.jpg   1.77MB   139 downloads

[Mohamed Khairy]

holloweyed, on Aug 11 2010, 01:30 AM, said:

With the busratio flag I have no more issues with the restart loop. But now the install hangs after inserting the retail DVD. There are many lines of text but it ends with these last few lines:

Kernel version:
  Darwin Kernel Version 10.4.0: Thu Jun 17 18:42:31 EDT 2010; annappirtrvh v4 :xnu-1504.7.4/BUILD/obj/RELEASE_I386
  System model name: MacPro2,1 (Mac-F4208DC8)
  
  System uptime in nanoseconds: 639070313

My specs are listed below. HD is in AHCI. Thanks for your help so far, this is the farthest I've gotten in a while.

IMAG0224.jpg

did you use ps2 device keyboard or mouse

ok from you sppecfication
use usb keyboard pelase to lower unoffical kexts you us that cause panic
i bought usb keyboard for that

[Mohamed Khairy]

pepsiblast08, on Aug 10 2010, 09:23 PM, said:

When I turn it to achi, I get stuck in the boot loop. Also, I don't have a SATA DVD drive. Just an IDE. Guess it's off to buy an IDE to SATA

i need some information about your south bridge id

[AntomicBomb]

Mohamed Khairy, on Aug 11 2010, 08:57 AM, said:

did you use ps2 device keyboard or mouse

ok from you sppecfication
use usb keyboard pelase to lower unoffical kexts you us that cause panic
i bought usb keyboard for that

Do you have to use 10.6.3? i tried it with 10.5.6 and i got the exact same error. And im using a usb keyboard and mouse... Will try with 10.6.3 tomorrow (when i buy the upgrade disk) so i will let you know if that was the problem with me at least.


I have almost the exact same system

[Mohamed Khairy]

when you get this panic
your keyboard ps2 is connected or not