Jump to content

iATKOS v7


Matteo80
 Share

67 posts in this topic

Recommended Posts

come al solito copio e incollo le note relative alla nuova versione del team TURCO.

ci sono alcuni problemi noti che posterò dopo cena.

 

iatkosv7.png

 

here is the link..

[editato per le regole interne del forum]

 

md5 iATKOS_v7.zip > 126455775040c328df88f399ad52b6bb

md5 iATKOS_v7.iso > 6395be5253f53f716ed042db1dd599f3

 

OSX86 is a collaborative hacking project to run the Mac OS X computer operating system on non-Apple personal computers with x86 architecture processors.

 

This upload includes compressed iATKOS v7 DVD iso image and md5 rtf files.

 

Attention!

 

- This DVD is designed for Non-Apple x86 computers (PC). So, do not try to boot it on Apple Hardware!

 

- This DVD includes Apple's Mac OS X Leopard 10.5.7 (9J61) installation for Intel and AMD CPUs, some basic drivers and x86 patches.

 

- Make sure that the md5 checksum of your iATKOS iso image matches the one in md5.rtf file. Do this MD5 check just before mounting or doing anything with the iso image! Otherwise you may have a faulty DVD image. Use quality media/burner and burn slowly.

 

- The oscar goes to Apple and OSX86 community..

 

Information:

 

- This OSX86 installation DVD release supports both GPT and MBR partitioned harddrives.

 

- Full retail main system like boot132 installation.

 

- You can make Clean, Upgrade (from previous versions of OS X on Intel/AMD), Refresh (renew your existing 10.5.7 installation) and driver-only installs using iATKOS v7 DVD. Upgrade/Refresh is highly successful on previous iATKOS installs and will mostly work for other installations too, read the readme for the process.

 

- You can update your running system using software updater just like real Macs on most PC hardware(Intel/AMD).

 

- Easy installation on RAID targets with manual bootloader installers and packages.

 

- Enhanced hardware compatibility: various systems including ATI, SiS, VIA chipset motherboards, enhanced nVidia VGA support with universal efi string and modified enablers.

 

Minimum hardware requirements: x86 SSE2 CPU, 512MB RAM, 10GB free space on target partition, OpenGL VGA card.

 

Recommended hardware requirements: Intel Core or AMD x2 CPU, 1GB RAM, 15GB free space on target partition, nVidia GeForce 6600 or better - ATI X1300 or better - Intel GMA 950 or X3100 VGA card.

 

Motherboard (the most important part) should be compatible for you to boot iATKOS v7 DVD and install natively.

 

Please read the readme carefully before anything.

Do not post questions about your issues about this release if you did not read the readme.

 

web:http://www.uphuck.com

http://www.osx86.es

 

IRC:irc.atlantis-irc.net #uphuck.DVD

fusion.osx86.hu #iATKOS

 

in association with OSX86.Türk and OSX86.ES teams

 

uphuck

 

cheers..

 

Source:

uphuck.ggrn.de (23/06/2009) 16.png

 

!!! READ CAREFULLY AND TAKE NOTES IF NEEDED !!!

 

Welcome to iATKOS v7 Installation..

 

Prepared by me and Pere.

 

The oscar goes to Apple and OSX86 community..

 

Thanks to all OSX86 community and all the computer guys that share their ideas, give feedback and report errors and even fix them sometimes.

 

And zapf2000, thank you buddy, for all of your supports, cheers to ggrn.de people..

 

Thanks to our operators Pere, Machan and prasys for their supports, tests and helps.

 

Special thanks to Pere and other friends for making our forum a useful place..

 

And finally thanks to nice OSX86.ES and OSX86.Türk people..

 

uphuck

 

Attention:

 

1- This DVD is designed for Non-Apple x86 computers. So, do not try to boot it on Apple Hardware!

 

Requirements for OSX86:

 

Minimum: x86 SSE2 CPU, 512MB RAM, 10GB free space on target partition, OpenGL VGA card.

 

Recommended: Intel Core or AMD x2 CPU, 1GB RAM, 15GB free space on target partition, nVidia 6600 or newer - ATI X1300 or newer - Intel GMA 950 or X3100 VGA card.

 

Motherboard (the most important part) should be compatible for you to boot iATKOS v7 DVD and install natively.

 

2- This DVD includes Apple's Mac OS X Leopard 10.5.7 (9J61) installation, some basic drivers and x86 patches.

 

3- IMPORTANT NOTICE - Make sure that the md5 checksum of your iATKOS iso image matches the one posted on our website. Do this MD5 check just before mounting or doing anything with the iso image! Otherwise you may have a faulty DVD image. Use quality media/burner and burn slowly.

 

4- MAKE SURE YOU TAKE NOTE OF YOUR Hardware IDs, Device IDs and device names before installing this system. This is very important. If you aren't sure what devices/hardware you own nor its IDs, then 3 options:

-Boot iATKOS v7 DVD, run "Hardware Info" from Utilities menu and take notes.

-Fire up a Linux Live CD (ie. Ubuntu Live CD), type "lspci" in terminal and take notes.

-Windowsers, get Everest Ultimate Edition and take note of your hardware.

 

5- Do a google search or surf to Hackint0sh, our forum, related OSX86 sites or wiki to find out if your hardware is supported or not. OSX86 does not support a wide range of hardwares like Linux and Windows. Do make sure that it is supported before you install. This is very important because after installation you may ask like "how can I get this hardware to work" and people would simply slap you with "it will never work". This little search will avoid your frustration and anger! Extending your lifespan!

 

6- IF SOMETHING GOES WRONG AFTER Installation - Please don't panic Scroll down for the Troubleshooting guide. If that fails, take a screenshot (or a picture) of what went wrong and post it in the forums. Make sure you have done the 3 Revival steps and troubleshooting steps before posting in the forum!

 

Information:

 

- You can update your running iATKOS v7 system using software updater just like real Macs on most PC hardware (Intel/AMD). Please read the related section below.

 

- You can also make upgrade/refresh/driver-only installs to your existing OSX86 system using iATKOS v7 DVD. Please read the related section below carefully.

 

- We also worked on solving the incompatibility issues for many hardwares, so more hardwares should be able to run this OS natively by using iATKOS v7 with additional advantages.

 

- Easy Software RAID installation with manual bootloader installers and packages.

 

This OSX86 installation DVD release supports both GPT (Guid Partition Table) and MBR (Master Boot Record) partitioned harddrives.

(Note: GPT is a partition table type for x86 computers which is also Intel Mac's partition table type. Its structure is different from MBR and so it has some nice features. The whole multiboot procedure may not be so friendly for newbies, so they should go on using MBR.

MBR has a limit of 4 primary partitions (which is a must for booting an OS, however linux can boot from logical partitions by MBR) but GPT has no such thing like primary or logical, therefore you can create up to 128 bootable partitions on GPT disks. HFS+ resizing is only possible on GPT drives and be sure it is such a comfortable feature. Windows Vista SP1 supports GPT and also Windows XP can be installed to a Hybrid GPT drive which can be easily created using OS X disk utility. I have no idea about GPT supports of Win 95, 3.1 or older versions, not even DOS. Feedbacks will be appreciated icon_smile.gif New Linux booter Grub2 supports GPT and also many Linux distros can be installed to Hybrid GPT drives.

In the near future, most of x86 computers will run on GPT drives.)

 

- This dvd may not include all the necessary drivers required by your setup. Additional steps may be needed to be taken by the user to setup and use such components.

 

- Main system is fully stock! That means it can't run on x86 hardware without selecting none of x86 patches.

 

Clean Installation:

 

1- Run Disk Utility via Utilities menu and erase the target partition for clean install. Do partitioning if you need to.

 

- You can choose MBR (Master Boot Record) or GPT (Guid Partition Table) via partitioning options. If you want to change your existing partition table type, note that all your existing data on disk will be gone!

- For Windows fellows that has not tested this amazing system yet and that does not want to loose their windows software, porn and virus&trojan archive on D:\\, should use Parted Magic Live CD for preparing an active primary target partition and after that, just erase it via diskutil. Jump to Step 2.

 

2- Select the destination for installation.

 

3- Click "Customize"*** and select what you need.

 

4- Click Install.

 

Install time is about 15 minutes.

 

Upgrade/Refresh Installation:

 

You can upgrade your existing installation (keeping your applications, data, user settings and accounts) with iATKOS v7 DVD. This works best on iATKOS installations but should work for most Leopard installations from 10.5.0 on Intel/AMD CPU's if you do it carefully. But it is still risky if you are not sure what you are doing.

 

For upgrading previous installations other than iATKOS, users should apply a very basic iATKOS v7 installation with basic sata/ide and vga drivers (and one of the Voodoo kernels if AMD) at first time. Users can enlarge their selection list with no worries of loosing their data, applications and settings on next trials of their system upgrade/refresh. But note that some of your applications just might not be fully compatible with 10.5.7 main system of Apple which is nothing to do with this OSX86 release.

System refresh is also a good option for just renewing your running system when something is wrong with it.

 

1- Select the destination for installation.

 

2- Click "Customize"*** and select what you need.

 

3- Open "Installer Log" from Window menu.

 

4- Click "Install" and click to Installer Log window to get it to front.

 

5- After Install before pressing "Restart", click to "Reset Password" from Utilities menu.

 

6- Reset passwords and directory permissions of all users and root.

 

7- Click "Restart" and reboot to your new system.

 

8- Change your user account type from "standart" to "admin" via System Preferences by using root password.

 

Install time is about 15 minutes.

 

Driver (only) Installation:

 

Another feature is installing necessary drivers/patches/kernels at anytime by using iATKOS v7 DVD.

 

- Boot iATKOS v7 DVD and select your destination target

- Click "Customize" and uncheck all items except the driver/patch/kernel you need to install

- Press "Install"

- Ignore the fail screen and click "Restart"

 

*** Customize section is the most important part of the installation for you to make OS X work on your hardware.

 

Customize:

 

There is already a basic default profile chosen. Only adding a few packages will probably be enough for most hardwares, read the package details carefully!

 

Simple information about packages:

 

- iATKOS Main system: If you want to install the osx86 main system, you need to select this.

 

- Bootloader: You have 3 choices. You must select one of them for booting your osx86 system. For RAID systems do not select none of the bootloaders, you will need to install the bootloader using one of the chameleon booter installer applications in utilities menu.

Chameleon v2 is the default selected bootloader, it has many options and a gui, however it is still experimental, if you have problems like unexpected kernel panics then choose old chameleon v1 during next install.

Chameleon v1.0.11 is compatible for most systems.

Xiezhy bootloader is also a very nice booter which looks like boot camp. It has no RAID support but besides that you can try it, you will like it.

 

- /Extra directory: This creates a directory named "Extra" on your root and executes it only if chameleon v2 is selected. Some Legacy drivers that cannot be loaded when system is booted with "-f" option and for some reason cannot be included in system mkext can be easily loaded from Extra folder in all conditions.

 

- DSDT: This package is to fix the DSDT of your motherboard and save it to a file for overriding at boot. This is needed for many mobos.

 

- Decrypters: You must select one of the decrypters for your x86 hardware.

 

- SMBIOS: You can select one of the enablers or one of classic x86 SMBIOS drivers. However these are not needed if chameleon v2 bootloader is selected.

 

- Kernels: 2 kernels and 3 choices. A custom kernel must be selected for AMD CPU's.

1- Not selecting none of the kernels. Stock kernel will be used by this way. More compatible systems may not select none of the kernels and use stock kernel.

2- 9.5.0 Voodoo kernel. This is more compatible and has many add-ons.

3- 9.7.0 Voodoo kernel. This is adds support for new Intel Core I7 series.

 

- ACPI: For older and Non-Intel motherboards, you can choose x86 modified ACPI or old APIC drivers for booting problems. Do not use VoodooPS/2 with these modified ACPI drivers, use ApplePS/2 if you have PS/2 devices. You'd better to use the stock ACPI if your motherboard is compatible enough.

 

- Disabler: This driver disables some problematic stock drivers.

 

- OHR: Driver for freeze issues on shutdown/reboot.

 

- Drivers: Additional drivers for your setup.

-VGA:

-nVidia: Try EFI string for desktop cards, if not working for you fully then try Enablers by the order listed. If you have GTX 2XX series card then select one of the GT200 drivers with an enabler.

-ATI: Check "ATI HD" for ATI cards. You will need to search for your ATI vga driver after system install to have a fully working ATI. Nearly every ATI model has its own driver and thats why I hate them all.

-Intel: You can use EFI string for many GMA 950 and X3100 laptops. Try the others if fails.

-System:

SATA/IDE drivers: 10.5.7 system only supports Intel ICH7 and some ICH8 Non-AHCI controllers, so you will need to select some of the SATA/IDE drivers for your Intel/Non-Intel Non-AHCI controllers and also select AHCI for some fixes to 10.5.7 AHCI driver.

-Intel Speedstep: Speedsteping support for Intel CPU's.

-Cardbus driver: This may be needed for some onboard firewire chips, pccard slots, USB ports, card readers and some PCI slots. If you have a compatible but non-working PCI card ie. wireless network card or a non-working onboard firewire, then you should try this driver. Note that this package also includes an ACPI driver which overrides the previous selected ACPI driver(s).

-USB: USB driver for problematic chips. You may also add CardBus driver to your selections to have your USB working fully. Made by Slice. Thanks to orByte for the method to patch the USBEHCI driver. This may fail for some motherboards.

-Sound: VoodooHDA is selected by default. It supports many sound chips. You can switch to Azalia Audio driver which enables just sound output, no input. AppleHDA 10.5.6 is for enabling AppleHDA Injectors because 10.5.7 AppleHDA is incompatible. Note that you may have rare kernel panics with VoodooHDA, just reboot again, thats it.

-PS/2: You can select Voodoo PS/2 which works for all and claims to make USB-PS/2 mouse/keyboard combinations work. Voodoo PS/2 with trackpad can be another choice for laptops but it fails on some laptops and cause freezes. Apple PS/2 driver is an old driver that you need to choose instead of VoodooPS/2 when using x86 modified ACPI drivers. By using Apple PS/2, both mouse and keyboard should be connected through PS/2.

-Network: Network drivers, nothin to explain..

 

-Languages: Additional language support. Apple still does not support some of them in retail DVD's, but we do.

 

-Post-Install Actions: This is needed for full system install but you should uncheck this if you only need to install a driver.

 

Please read the description of the packages carefully.

 

Preparing an Upgradable System:

 

This release is more successful for creating upgradable systems than our previous releases. So there is no exact profile of selections for upgradable systems anymore. It will be possible even for most AMD systems. But there are still some limitations for some drivers:

 

- GMA 950 Desktop

- GMA 950 Rare

- GMA X3100 p

- USB

 

If you need these driver(s) on your system then you should reinstall them after main system update is applied. This may be fatal only for GMA 950 Desktop systems and for GMA 950 laptops that has the 27AE id which is inside the "GMA 950 Rare" package, the rest is ok.

But do not forget there may always be problems with existing drivers and upcoming new system, no one can exactly know how will they deal with new system. ie: new upcoming kernel may be incompatible with even Intel hardware, if so users that selected one of the Voodoo kernels will be the lucky ones to do the update. Or same issue may come up with the ACPI driver of new update. So we may not know what will happen exactly but most solutions are inside the v7 DVD, we have done our best for making this happen.

 

Software RAID Systems:

 

Do not choose none of the bootloaders for installation on a RAID target. You will install the bootloader manually using one of the Manual Chameleon installers via Utilities menu. Do this manual bootloader installation before main system install (you can do it after system installation but you need to open the install log during install).

 

- Preparing Software RAID targets: You cannot prepare RAID targets by booting with an osx86 DVD, you can only erase the existing RAID targets for clean installation.

You have 2 options: You can create RAID volumes via a running OS X system using Disk Utility. Other option is restoring an osx86 DVD to a USB-HDD, installing a chameleon bootloader to it manually and booting with it. This time you will be able to create RAID volumes using Disk Utility. We recommend Striped RAID for main system target and Mirror RAID for storage target.

You can create Software RAID volumes using whole disks or individual partitions.

 

- Bootloader Installation: Software RAID systems boot using boot helper partitions and so the bootloader needs to be installed to boot helper partition instead of the RAID slice. As mentioned above, you will need to use one of the manual Chameleon Installers which you can find under Utilities menu. You will need to enter the bsd number of your boot helper partition. You can get the values using Disk Utility or System Profiler. i.e. if the RAID slice of your system target is disk0s2, then your booter helper partition that you need to install the bootloader is disk0s3. Do the math for other examples.

 

Multiboot:

 

iATKOS v7 has no integrated procedure for multibooting but preparing a multiboot GPT or MBR system with this release is easy.

 

Here is a ''How To'' for GPT and MBR triple boot including Mac-Win-Linux.

 

- MBR (Master Boot Record) triple boot -

 

- Change your partition table type to MBR (msdos type) and create 3 primary partitions by using iATKOS Disk Utility or Parted Magic Live CD. HFS+ format for OS X target, Fat32 for the others.

Note: %99.99999 of the PC harddrives already have MBR partition map scheme (msdos type) which you can change it to GPT via Parted Magic CD or iATKOS Disk Utility if you like to.

 

- Add boot flag to Vista or Linux target and install the OS' in any order you like. For linux, do not install bootloader to MBR, install it to linux root.

 

- Boot iATKOS v7 DVD and install OS X to its target as usual.

 

- Now you may need to repair Vista: Add boot flag to Vista partition, boot Vista DVD, select repair, add boot flag to OS X partition, thats all.

 

Now you have triple boot on MBR.

 

Note: Adding boot flag to MBR partitions: Boot Parted Magic Live CD, right click to partition, select flags and click to boot.

 

- GPT (Guid Partition Table) triple boot -

 

- Change your partition table type to GPT (Guid Partition Table) and create 3 partitions by using iATKOS Disk Utility. HFS+ format for OS X target, Fat32 (msdos) for the others. (This may fail on some hardware)

 

- Boot iATKOS v7 DVD, install only bootloader to OS X target.

 

- Boot Windows Media and install it to its Fat32 target partition.

 

- Boot Linux media and install the OS. Install the bootloader to linux root.

(Note: Some live linux cd stuff (knoppix, kanotix, parsix, etc.) has built-in installer applications and they use gparted for partitioning and formatting targets. At this point, formatting target to linux fs via Gparted is not a good choice (they can break the hybrid gpt), use unix fdisk just for changing the target partition type from ''c0'' to ''83'' which is linux partition type and then continue installation.)

 

- Boot iATKOS v7 DVD and install OS X as usual.

 

Now you have triple boot on GPT, thats all.

 

Unsuccessful Installation, Related Symptoms and Simple Troubleshooting guide:

 

At times after installation, your system may not work properly as in - it may restart, not boot at all or hang at a certain point. This is quite normal and there are many ways for it to be fixed. It varies from one case to another case. However this basic troubleshooting guide would help you to fix most of the common problems.

 

If you're facing hangs, freezes or kernel panics (which is present as a shutdown symbol on the screen just after boot) type in "-v -f" (without quotes) in the boot command of the bootloader. This would give you verbose output which is useful for us to help you or for you to post in the forums so that we can trace it down.

 

"Waiting for root device" - It means that OS X doesn't see your hard disk or boot device (which means you can face with this during dvd boot or after system install during hdd boot) at all. Chances are: If you face with this during hdd boot, then you may have installed the wrong drivers. Try this, reboot back using DVD, check the proper patch/driver for your hardware if any (read the driver installation section in readme). If you have selected before, try re-installing it clean without selecting it and vise versa. If that fails or if you got this error during dvd boot, then change your SATA mode from RAID to ACHI or even to IDE, and also you need to check other bios settings that might be the usual problem, read the "mickey mouse guide" on our forum for bios settings. This usually does fix the problem. If not, then you may have really incompatible hardware for this OS.

 

CPU errors - Try to boot with "cpus=1" without the quotes. It happens on certain CPUs due to BIOS/DSDT bug. Your DSDT may need patching.

 

Blue screen on bootup - This means that OS X doesn't see your monitor properly or your graphics card isn't working correctly. Reinstall again, but this time make sure you don't select any enablers/efi strings and you might also select the package to remove NVDAResman.kext, these would fix it, then you can login to gui and search drivers for your vga.

 

Kernel Panic (i.e IOxxyyzzz failed) - This means you have selected an incompatible driver. Keep in mind that sometimes certain kext patches may not work for your system even though they are the same chipset but a slight variation may cause it not to work on your PC. Reinstall back but this time don't select any funny patches/drivers. This would resolve your problem.

 

Unable to boot - If you can get to the GUI but for some reason if certain things don't work. Don't fear, simply boot in safe mode by typing -x in the boot parameters of your hard disk. This would bypass some non-working things and would get you to the OS X Desktop. From there you can navigate through the Internet and fix up your PC.

 

Here is a neat tip by the way. If you're troubleshooting something remember to boot with "-f" (without quotes) always, this would force the drivers to be reloaded and at times it can fix your problem.

 

*******************************************

 

For additional Help and instructions, here is the website and irc channel.

 

web:http://www.uphuck.com

http://www.osx86.es

 

IRC:irc.atlantis-irc.net #uphuck.DVD

core.osx86.hu #iATKOS

 

******************************************

 

Good luck. If you enjoy your Mac OS X Leopard System, then buy a real Mac. Remember that this system is only for testing Mac's amazing system. Using OS X without a license is not right.

 

Source: uphuck.ggrn.de (23/06/2009) 16.png

Link to comment
Share on other sites

ciao Alex :tomato:

io non la scarico per ora, giovedi discuto la tesi e poi mi prendo una piccola vacanza... solo dopo mi butterò su questa iatkos... facci sapere come va quando l'hai provata good.gif

 

posto qui di seguito i problemi riscontrati e risolti grazie all'ottimo lavoro dell'utente PERE

 

ISSUE 01:

Kernel panic when installing or using Iatkos V7 on Nforce Mobo with more than 4gb ram memory.

Solution:

Boot with the flag maxmem=2048 , finish install and reboot, once you are on desktop, erase AppleNForceATA.kext from system/library/extensions and install one of these:

 

AppleNForceATA.kext 64 4gb ram support

http://ul.to/msp8sr

AppleNForceATA.kext 64 4gb ram support (untested).

http://ul.to/dy7yl1

If the Nforce network driver is not working, try this one:

http://ul.to/ezoaeg

 

Thanks to Roisoft and Roci for pointing the solutions to Chipset and Network driver.

 

ISSUE 02:

You got an HP530 laptop or MSI Wind with GMA950 (27AE id) and no driver from DVD gives you QE, CI and VGA monitor output.

Solution:

Firstly try this: select "GMA 950 Rare" and "GMA 950 Laptop" at the same time, if not working then,

Don´t select ANY GMA950 driver and/or EFI string on install. After you arrive to desktop, install this:

http://ul.to/0bx92c

 

Courtesy from http://code.google.com/p/cybergreghost/downloads/list

 

ISSUE 03:

GTX 2xx users with blank screen on boot

Solution:

do not use efi string for your nVidia GTX 2xx cards, instead use one of the enablers, read the descriptions pls.

 

Source:

uphuck.ggrn.de (23/06/2009) 16.png

 

picture6tus.png

picture2rhr.png

picture5nyn.png

Link to comment
Share on other sites

wow, la 10.5.7 dovrebbe risolvere il mio problema di compatibilità con gli i7 senza dover disattivare alcun core... corro a downloadare! da anche il supporto alla HD 4870?

 

non so, non seguo la situazione ati e poi ora come ora è un po che non riesco neanche seguire molto insanely visto gli impegni universitari.

cmq, nell'immagine dell'installaer che ho postato editando il mio secondo messaggio parla di ati HD, non so se questo ti puo aiutare

Link to comment
Share on other sites

non so, non seguo la situazione ati e poi ora come ora è un po che non riesco neanche seguire molto insanely visto gli impegni universitari.

cmq, nell'immagine dell'installaer che ho postato editando il mio secondo messaggio parla di ati HD, non so se questo ti puo aiutare

 

sto downloadando, ti farò sapere!

in bocca al lupo per gli esami!

Link to comment
Share on other sites

Ciao a tutti,

 

sono a circa il 70% anch'io ........ vediamo se almeno questa riesco ad installarla sul mio Hp Dv600 AMD .............

 

Vi farò sapere ...... ;):P

 

Bye Bye

 

Ciao, ho visto che possiedi la mia stessa scheda madre, mi fai sapere se bisogna usare qualche accorgimento particolare per installare questa Iatkos? Sono un novellino e avrei bisogno di una mano, grazie!

Link to comment
Share on other sites

Ciao, ho visto che possiedi la mia stessa scheda madre, mi fai sapere se bisogna usare qualche accorgimento particolare per installare questa Iatkos? Sono un novellino e avrei bisogno di una mano, grazie!

 

Con la P5K lascia perdere la Iatkos (che pur essendo buona per un principiante è un casino) è installa Retail con la guida di williamwallace sezione guide e vai sicuro al 100%, lan audio sleep e deep sleep compresi.

 

Giorgio

Link to comment
Share on other sites

no daveta,mi spiace ma, il Boot Think di xiezhy non l ho proprio provato

 

l installazione sul mio pc (in firma) è andata a buon fine ma, ho sempre il problema

della v5 e v4,cioè,il problema è il mio pc che pilota bene il segnale alla scheda video

ci smanetto un pò e poi faccio sapere

 

comunque davvero ottima release

Link to comment
Share on other sites

io ho installato sul pc in firma con il boot loader di xiezhy che è simile al chamaleon v2 presenta una GUI con sfondo bianco le icone degli HDD quella del cd-rom..premendo f8 si apre la schermata simile al chameleon classico che permette di scrivere i vari comandi -v ecc...per il resto mi sembra una bella release tutto ok alla prima installazione..

 

saluti

Link to comment
Share on other sites

Ciao a tutti, per natura sono molto curioso, quindi vorrei provare anche la iATKOS v7, vorrei sapere visto che siete molto più esperti di me, cosa dovrei settare per l'installazione sul mio pc in firma..... Cmq ho l'hardware consigliato nel sito iATKOS..... Non capisco tanto l'inglese quindi chiedo una mano ciao a tutti a presto.....

Link to comment
Share on other sites

Ciao, ho visto che possiedi la mia stessa scheda madre, mi fai sapere se bisogna usare qualche accorgimento particolare per installare questa Iatkos? Sono un novellino e avrei bisogno di una mano, grazie!

 

 

Con la P5K lascia perdere la Iatkos (che pur essendo buona per un principiante è un casino) è installa Retail con la guida di williamwallace sezione guide e vai sicuro al 100%, lan audio sleep e deep sleep compresi.

 

Giorgio

 

Ciao, come dice Giorgio_multi ..... la retail o la ideneb, che attualmente stò usando, sono preferibili ...... ho provato questa v7 ..... ma al riavvio non mi vede il disco SATA ... :):( .. UFFA !!!!!!!!!

 

Vedro di fare altre prove .......

 

Ciao Ciao

Link to comment
Share on other sites

Ciao a tutti, volevo chiedervi una cosa. Posseggo sul mio Vaio la Iatkos 1.0 come potete ben leggere nella mia firma. Siccome molti programmi e software richiedono come minimo la 10.5.2 o la 10.5.3 sono interessato ad aggiornare il sistema operativo. Viste e considerate le caratteristiche del mio laptop credete che questa versione di Iatkos possa rispondere ai requisiti di sistema? (mi riferisco sopratutto alla scheda video visto che la Kalyway 10.5.2 andava bene eccezion fatta proprio per la x3100 che non voleva saperne di andare, oltrechè l'avvio) Grazie a tutti coloro che mi daranno una risposta(spero positiva :D )

p.s. da quale sito torrent devo scaricarla? visto che la baia dei pirati non da esito positivo...

Link to comment
Share on other sites

ok scaricata ( in appena 15-16 ore con una connessione adsl che non va a più di 70 kbps... devo compiacermi :) ) ora volevo solo due consigli: se leggete la mia guida per installare la iATKOS 1.0ir2 sul Vaio, noterete che io avevo scritto

 

Alla sezione bootloader>darwinx86, in drivers>gmax3100, in system>sata.

 

Ed erano questi gli unici parametri da contrassegnare per farlo partire correttamente. Poi al primo avvio si doveva installare chamaleon v1 altrimenti non bootava senza cd o, qualora avessi installato Vista neanche con quello. Ora vista e considerata la schermata di installazione quali voci spuntare? Io avevo pensato a Chamaleon v1, GMA x3100 (a proposito che differenza c'è con la x3100p ?), SATA IDE (o meglio Intel SATA IDE visto che il chipset è un Intel GMA 965?), Network>Wired : Marvell Yukon 88E8001. Qualcuno mi conferma le previsioni o suggerisce migliori modifiche??? grazie hm

Link to comment
Share on other sites

 Share

×
×
  • Create New...