terranova2142 Posted June 24, 2011 Share Posted June 24, 2011 Today I installed mac os x 10.6.8 and graphic card work with out ATY_init,you must up to 10.6.4 an update GFX 1.0,if you use ATY_init for graphic card ,you must remove ATY_init firts if you want update to 10.6.8,and not you will get blank screen.you need remove it and reboot,put ati5000injector inE/E Device 68F9 Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/ Share on other sites More sharing options...
mitch_de Posted June 25, 2011 Share Posted June 25, 2011 You mean you have native, untouched ATI drivers ? Or do you use modded / older drivers sets or some QE/CI Excotic patch? WHat GPU do you have (vendor). Thanks Can you please also try to run an TEST with OpenGLExtensionsviewer ? http://www.realtech-vr.com/glview/download.html Run in windowmode (disable full screen) in up to 1280x800 so that others can better compare the result if they use other screen resolution in full screen. - no fullscreen, up to 1280x800, modell KING (more game related than CUBE), Multisampling *4 (more GPU work), Anitros *8 (more gpu work) ( i attatched screenshoot which shows the settings + results 9600 GT) Also would be nice to see the LUXMARK value (OpenCL Benchmark). http://www.luxrender.net/wiki/LuxMark#Download My 9600GT: 624 (poor) Att: OpenGLExtensionsviewer 9600 GT Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1703143 Share on other sites More sharing options...
terranova2142 Posted June 26, 2011 Author Share Posted June 26, 2011 This is not modded,it is original kext from 10.6.8 and 10.6.8 use kext Lion Can you please also try to run an TEST with OpenGLExtensionsviewer ?http://www.realtech-vr.com/glview/download.html Run in windowmode (disable full screen) in up to 1280x800 so that others can better compare the result if they use other screen resolution in full screen. - no fullscreen, up to 1280x800, modell KING (more game related than CUBE), Multisampling *4 (more GPU work), Anitros *8 (more gpu work) ( i attatched screenshoot which shows the settings + results 9600 GT) Hehe,am sorry my graphic card weak for fps Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1703628 Share on other sites More sharing options...
mitch_de Posted June 26, 2011 Share Posted June 26, 2011 Yo mean ist slower than my 9600 GT, which isnt bad but not a rocket? At least the luxmark bench value would be interesting, because even its not an gaming card (like my 9600 also), it may be interesting if its better in OpenCl than my card (luxmark = 624). Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1703966 Share on other sites More sharing options...
michaspoli Posted July 14, 2011 Share Posted July 14, 2011 i had a fully working 5450 with 10.6.7 after many tries. Now after update to 10.6.8 (with pacifist) i dont bring it up to fully working. i will try a pacifist install of graphics update 1.0, and with the injector. Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1714591 Share on other sites More sharing options...
michaspoli Posted July 15, 2011 Share Posted July 15, 2011 Works Perfekt. Thanks a lot. What did i do. I extracted the ATI Kextfiles from 10.6.8 with Pacifist /S/L/E. Deleted ATY_init. Put ati5000injector.kext to /E/E. In Terminal: pfix for repairing Permisions und writing new Mkext. Reboot. Perfekt! Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1715023 Share on other sites More sharing options...
terranova2142 Posted July 18, 2011 Author Share Posted July 18, 2011 Works Perfekt. Thanks a lot. What did i do.I extracted the ATI Kextfiles from 10.6.8 with Pacifist /S/L/E. Deleted ATY_init. Put ati5000injector.kext to /E/E. In Terminal: pfix for repairing Permisions und writing new Mkext. Reboot. Perfekt! Nichts zu danken.Ich verwende der mac os x 10.7.Du musst setzen ATI 5000 injector in E/E wenn du installieren. Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1716356 Share on other sites More sharing options...
fukmondo Posted July 23, 2011 Share Posted July 23, 2011 Works everything but locks and freezes constantly, black sreen, system is uselles.Boot is fine and boots with driver loaded. I can reproduce error by opening many windows simoutanesly and dashboard in no time, in normal working sometimes in minutes sometimes in 20 minutes intervals. Need restart to continue without loaded driver everything is A ok. Soon as driver loaded lockups occured. I can load driver with aty_init or ati5000 injection. There was not device id in ati5000 controler so I edited info.plist. Erorr is visible in 32 and 64 boot. Anybody with solution or same problem? Saphire 5450 512MB hdmi vga dvi I saw in ati3000.kext device id from mz card so I delete kext now I have resolutions flash video and no lockups but no QE EDIT: My bad, faulty card, here we go to shoping again! Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1720552 Share on other sites More sharing options...
Eiszeit Posted July 31, 2011 Share Posted July 31, 2011 Thanks, works great. This is what I did: 1. Installed OSX 10.6.3 without any additional kexts. 2. Upgraded to 10.6.8 with 10.6.8 combo (still, with no additional kexts for GPU). 3. Moved ati5000injector to E/E, reboot. There is no 4, It works perfectly now. Link to comment https://www.insanelymac.com/forum/topic/260585-ati-5450-on-1068-without-aty_init/#findComment-1726621 Share on other sites More sharing options...
Recommended Posts