Sapphire ATI Radeon 2900 PRO 512 + LEO

[Synapsis]

Hi,I just installed Leo4All v2, without any patches just plain OS, and my GFX seems to be working out of the box,the only problem i had, that the Monitors are switched, meaning:

 

Display 1 is mapped to settings of display 2 and display 2 is mapped to settings of display one, thats an issue cause i got a 22" and a 19" Can someone confirm this issue?

 

MySpecs: Gigabyte P35-DS3 / Core 2 Duo 6300 / 8GB Ram / Sata @ EHCI - Nativ working / Realtek LAN - working / DVDRW - working / USB Ports - all Working / Leo4All v2, default installation Toh Kernel 9.2.0

 

Here are some screenshots of my settings, has anyone got the same issues? I got another 22" buts this setup is quite hmm.. to wide for me

 

it seems that a lot of ppl can have this issue but don't know it, since the primary screen goes out of range, and the second is grey (as u cant see anything on the second screen after installation, and the keyboard detection screen has a grey background!)I heard that a lot of ppl see a gray screen after installation, so maybe thats the problem, that the screens output gets swapped somehow.

 

Just a thought, could be wrong about it as well, but it seems logic to me. since i first seen a gray screen as well with only one screen attached.u can clearly see on that screenshot, that the screens are swapped, the L226 is actually my primary screen (22") and the T920 is the secondary screen (19")When I hotswap the screens, the system swaps those again o.O

 

Here is the ALKOR output i got:

 

Alkor: Starting.choosed model ATI Radeon 2900 Series

Alkor: Setting @0,compatible=ATY,Triakis

Alkor: Setting @1,name=ATY,Triakis

Alkor: Setting @0,display-connect-flags=0x00000400

Alkor: Setting ATY,Rom#=113-B2250F-207

Alkor: Setting @0,name=ATY,Triakis

Alkor: Setting @1,EDID=<data not shown>

Alkor: Setting @1,compatible=ATY,Triakis

Alkor: Setting ATY,memsize=0x10000000

Alkor: Setting @1,device_type=display

Alkor: Setting model=ATI,RadeonHD2900

Alkor: Setting @0,device_type=display

Alkor: Setting @0,EDID=<data not shown>

Alkor: Setting @1,display-connect-flags=0x00000400Alkor: Setting ATY,EFIVersion=01.00.207

Alkor: Setting ATY,EFIVersionBios=113-B22501-X22B

Alkor: Setting ATY_EFIEnabledMode=0x00000002Alkor: Setting device_type=ATY,TriakisParent

Alkor: Setting VRAM,totalsize=0x10000000Alkor: Setting AAPL,aux-power-connected=0x00000001

Alkor: Setting name=ATY,TriakisParent** Device in slot: SLOT--1 **

dsmos: Initializing...dsmos: Hook and decryption contexts set!

dsmos: Starting...

 

Is it possible to swap the DVI output somehow and remap the displays to right correct output?

[ Mysticus C*]

http://forum.insanelymac.com/index.php?act...&pid=493777

 

check this out...