geobenz Posted February 21, 2008 Share Posted February 21, 2008 First of all, Big thanks to Zephyroth for his work on this release, he makes things easier, and of course thanks to all OSx86 community. Here is my spec : NForce 4 Asus A8n-SLI Athlon 64 3000+ 2Go DDR Ram PNY Geforce 6800 / 256Mo Sata Drive So, during leo install I've checked : -Toh Kernel 9.2.0 -AppleAC97Audio -The driver for nforce2/3/4/5 ... -NVIDIA Kext + NVInject 256 -forcedeth -EFI+MBR At first boot I had the loop at account creation error, so I've followed the instructions on http://osx86.wikidot.com/, then I've successfully booted with dual screen support, sound, lan but I still can't have QE/CI Support. So I've put my Device and vendor ID (normally, 0x00f910de) and I've overwritten all others existing ones on Geforce.Kext, NVDANV40Hal.Kext and NVDAResman.Kext Then open terminal sudo -s cd /System/Libary/Extensions/ chmod -R 755 * && chown -R root:wheel * cd .. rm -r Extensions.mkext kextcache -a i386 -e reboot I've allready tried to install NVInject v0.2.1 but with no result. Does Someone have any ideas on how I can get QE/CI Working ? Link to comment https://www.insanelymac.com/forum/topic/89202-zephyroth-1052-cant-get-qeci-working-on-6800-series-gpu/ Share on other sites More sharing options...
geobenz Posted February 22, 2008 Author Share Posted February 22, 2008 Does anybody have the same problem ? Link to comment https://www.insanelymac.com/forum/topic/89202-zephyroth-1052-cant-get-qeci-working-on-6800-series-gpu/#findComment-637299 Share on other sites More sharing options...
theprofessor Posted February 23, 2008 Share Posted February 23, 2008 same problem here with my 6800gt. my specs: athlon46 3500+ asus a8n-e asus 6800gt Link to comment https://www.insanelymac.com/forum/topic/89202-zephyroth-1052-cant-get-qeci-working-on-6800-series-gpu/#findComment-639091 Share on other sites More sharing options...
DoiX Posted February 23, 2008 Share Posted February 23, 2008 according to this --> http://osx86.wikidot.com/vendors-devices 6800 is not fully supported Link to comment https://www.insanelymac.com/forum/topic/89202-zephyroth-1052-cant-get-qeci-working-on-6800-series-gpu/#findComment-639223 Share on other sites More sharing options...
dying4004 Posted February 23, 2008 Share Posted February 23, 2008 guyz..... what is QE/CI??? Link to comment https://www.insanelymac.com/forum/topic/89202-zephyroth-1052-cant-get-qeci-working-on-6800-series-gpu/#findComment-639378 Share on other sites More sharing options...
geobenz Posted February 26, 2008 Author Share Posted February 26, 2008 guyz..... what is QE/CI??? Quatz Extreme and Core Image. these two features are need to be supported by your GPU if you want to run some specific graphics applications (3D, Editing ...). in my case, Final Cut got crashed according to this --> http://osx86.wikidot.com/vendors-devices 6800 is not fully supported http://forum.insanelymac.com/index.php?s=&...st&p=503269 Some people seams to get it working anyway... I tried -aKy- method but it doesn't work for me. There is one thing I cant do : use Marvins AMD Utility to patch NVDAResman.kext Marvins Utility tell me that there is no file to patch ... can someone tell me how to patch the file? I know that Marvin utility use CPUID to patch files, so Where can I find CPUIP data for my card ? Otherway I tried GFX strings. I can run leo without nvinject but I still cant enable QE/CI... You can found info here --> http://forum.netkas.org/index.php/topic,64.0.html I had created my GFX string according to this --> http://forum.netkas.org/index.php/topic,9....28.html#msg1028 Link to comment https://www.insanelymac.com/forum/topic/89202-zephyroth-1052-cant-get-qeci-working-on-6800-series-gpu/#findComment-643871 Share on other sites More sharing options...
Recommended Posts