lstep Posted February 11, 2008 Share Posted February 11, 2008 I have Leopard (Galyway) installed on a Gigabyte GA-GM-G33-DS2R. It installed with no modification (2 sata drives were not set to ahci and the dvd drive is ide). The native GMA 3100 graphics gave 1024x768 in millions of colours and no QE/CI support. LAN worked out of the box and sound required installation of a driver. Sleep did not work, even for the display (Samsung). I then installed an Ati HD 2600 Pro (256megs) and installed the latest Triakis driver and inputted my Device-ID into Info.plist found inside ATIRadeonX2000.kext . The number put in was 0x95891002 (in between a bunch of similar numbers already there). I edited the file as root. I then rebooted. Got lot's of choices for resolutions and colours but QE is not support while CI is. Here the info for what it is worth: ------ ATI Radeon HD 2600 Pro: Chipset Model: ATI,RadeonHD2600 Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: ATI (0x1002) Device ID: 0x9589 Revision ID: 0x0000 ROM Revision: 113-B2250F-207 EFI Driver Version: 01.00.207 Displays: SyncMaster: Resolution: 1280 x 1024 @ 60 Hz Depth: 32-bit Color Core Image: Software Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Not Supported Display Connector: Status: No display connected ------ Does anyone have a solution to this? By the way, Fusion works great with Boot Camp on this system (it uses the hard drive with XP on it). I took the path of least resistance and ordered a PNY GeForce 7300GT (256megs) . Ideally, of course, the GMA 3100 graphics will one day get a driver (they do work in Linux). Finally, while I can get the display to sleep I cannot get the system to sleep. Any help would be appreciated...ls Link to comment Share on other sites More sharing options...
legolas96 Posted April 21, 2008 Share Posted April 21, 2008 i have the same problem any solution for this problem? Link to comment Share on other sites More sharing options...
sama7896 Posted April 21, 2008 Share Posted April 21, 2008 my bet is you did not install atiradeonx2000 properly (did you edit the plist while in extensions folder ?) You should drag the kext to desktop, modify plist (best with bbedit) and then reinstall with kexthelper. Hope this helps, i have the same card and it works Link to comment Share on other sites More sharing options...
Yahve Posted April 28, 2008 Share Posted April 28, 2008 I edited the file as root. I then rebooted. Got lot's of choices for resolutions and colours but QE is not support while CI is. Here the info for what it is worth: I have an HD2600 Pro and the solution for me is the driver i found on Leo4All V3 "ATI-2600PRO-PCI-E.pkg" Now my systemp support QE/CI, i can go sleep, but when is awake the screen flashing Excuse my english Link to comment Share on other sites More sharing options...
Recommended Posts