Branndon Posted February 2, 2008 Share Posted February 2, 2008 I have tried almost every install pack I can find out there and have even edited them. I have had qe/ci working once a while ago with out even trying, but I didn't know what it was at the time, and have since reinstalled Leopard and can't seem to find the pack that did it for me. Here's what I've tried and the results GeForce.pkg (Not Supposed to work in Leopard) Files Installed: GeForce.kext GeForce2MXGLDriver.bundle GeForce3GLDriver.bundle GeForceFXGLDrive.bundle GeForceGA.plugin GeForceVADrive.bundle NVDANV10Hal.kext NVDANV20Hal.kext NVDANV30Hal.kext NVDANV40Hal.kext NVDAResman.kext Result: Full Resolution support, millions of colors, and L17AAM Color Profile. C/I = Software Q/E = Not Supported leo vid kext (Rebooted with -f) Files Installed: GeForce.kext *error after reboot, can't use! GeForce2MXGLDriver.bundle GeForce8xxxGLDriver.bundle GeForceFXGLDrive.bundle GeForceGA.plugin GeForceVADrive.bundle NVDANV10Hal.kext NVDANV20Hal.kext NVDANV30Hal.kext NVDANV40Hal.kext *error after reboot, can't use! NVDANV50Hal.kext NVDAResman.kext *error after reboot, can't use! Result: 1024x768 only leonvidia (Rebooted with -f) Files Installed: GeForce.kext *error after reboot, can't use! GeForce2MXGLDriver.bundle GeForce3GLDriver.bundle GeForce8xxxGLDriver.bundle GeForceFXGLDrive.bundle GeForceGA.plugin GeForceVADrive.bundle Natit.kext NVDANV10Hal.kext NVDANV20Hal.kext NVDANV30Hal.kext NVDANV40Hal.kext *error after reboot, can't use! NVDANV50Hal.kext NVDAResman.kext *error after reboot, can't use! Result: 1024x768 only NVInject 0.2.0 (Rebooted with -f) Files Installed: NVInject.kext Result: 1024x768 only NVInstallerV.31.pkg (Rebooted with -f) Files Installed: GeForce.kext GeForce2MXGLDriver.bundle GeForce3GLDriver.bundle GeForceFXGLDrive.bundle GeForceGA.plugin GeForceVADrive.bundle NVDANV10Hal.kext NVDANV20Hal.kext NVDANV30Hal.kext NVDANV40Hal.kext NVDAResman.kext Titan.kext (Not sure which package, just noticed it on this one) Result: Kernal Panic! Won't boot. Geforce 7600 Drivers Nvidia Installer V1.9 by Punk92 (Rebooted with -f) Files Installed: GeForce.kext GeForce2MXGLDriver.bundle GeForce3GLDriver.bundle GeForceFXGLDrive.bundle GeForce7xxxGLDriver.bundle GeForce8xxxGLDriver.bundle GeForceGA.plugin GeForceVADrive.bundle NVDANV10Hal.kext NVDANV20Hal.kext NVDANV30Hal.kext NVDANV40Hal.kext NVDAResman.kext NVInjext.kext Result: Full Resolution support, millions of colors, and L17AAM Color Profile. C/I = Software Q/E = Not Supported Geforce 7600 Drivers Nvidia Installer V1.9 by Punk92 (Rebooted with -f) Files Installed: GeForce.kext (Edited and added 0392 for my device id, loaded ok) GeForce2MXGLDriver.bundle GeForce3GLDriver.bundle GeForceFXGLDrive.bundle GeForce7xxxGLDriver.bundle GeForce8xxxGLDriver.bundle GeForceGA.plugin GeForceVADrive.bundle NVDANV10Hal.kext NVDANV20Hal.kext NVDANV30Hal.kext NVDANV40Hal.kext(Edited and added 0392 for my device id, can't load) NVDAResman.kext(Edited and added 0392 for my device id, can't load) NVInjext.kext Result: Full Resolution support, millions of colors, and L17AAM Color Profile. C/I = Software Q/E = Not Supported Link to comment Share on other sites More sharing options...
billman424 Posted February 2, 2008 Share Posted February 2, 2008 are you sure you added your device id correctly, your full id is the device id then the vender id for example my 7900 gs device: 0x0292 vender: 0x10DE so my full id is 0x029210de and thats what i added to the geforce.kext , nvanv40hal.kext and the nvdaresman.kext Link to comment Share on other sites More sharing options...
dasepsilon Posted February 2, 2008 Share Posted February 2, 2008 i reinstalled my driver also, by extracting the .kexts from the 10.5.1 update-dmg and just added my id's to the files as well as copied nvinject. works fine. Link to comment Share on other sites More sharing options...
Branndon Posted February 3, 2008 Author Share Posted February 3, 2008 Yes, Mine is 0x039210de and I added it in the correct place, but I'm not sure if I need to do any terminal commands to make it function. I have read the tutorials that include the terminal edits, but it didn't work for me System Specs AMD Atllon 64x2 4800 (940 socket) (SSE, SSE2,SSE3) CS MCP61PM-HM mother board onboard graphics are nvidia mcp61 video card is nvidia geforce 7600 256mb ram BIOS is phoenix 5.05 Memory is 4gb ddr2 pc 4300 thanks again, Insanely Mac is a great site. Link to comment Share on other sites More sharing options...
darkclaw Posted February 14, 2008 Share Posted February 14, 2008 As i remember for Leopard is NVinjet 0.1.3 ..... I have the same graphic board gigabyte 7600GS 256MB. I have this installed and working good, Well the only problem is that Profile System say that the amount of grapic memory is 128. And I don't know how to fix that.... Link to comment Share on other sites More sharing options...
Recommended Posts