denisb Posted February 1, 2008 Share Posted February 1, 2008 Hi, I am french so sorry for my bad english but I haven't found on the french forum. I have a P5WDH Deluxe motherboard with the latest bios I have just install Leopard Kalyway with vanilla kernel and acpi fix on a fresh partition (no programme installed) My bios configuration is: Microcode Updation [Enabled] Max CPUID Value Limit [Disabled] Execute Disable Function [Enabled] Enhanced C1 Control [Auto] CPU Internal Thermal Control [Auto] Virtualization Technology [enabled] intel speedstep enabled Chipset: Hyper Path 3: [Disabled] Memory Remap Feature [Enabled] Onboard Devices Configuration: JMicron Controller Mode [AHCI] PCIPnP: Plug And Play O/S [Yes] Power: Suspend Mode [s3 only] Repost Video on S3 Resume [No] ACPI 2.0 Support [Yes] ACPI APIC support [Enabled] chipset hyperpath 3 disabled memory remap enabled aiquiet disabled Is it possible that a P5WDH user write his bios configuration if sleep is correct on his hackintosh ? Thanks for all Link to comment Share on other sites More sharing options...
denisb Posted February 2, 2008 Author Share Posted February 2, 2008 Nobody to help me ?? Link to comment Share on other sites More sharing options...
fredouille Posted February 2, 2008 Share Posted February 2, 2008 hello !! http://forum.insanelymac.com/index.php?sho...77187&st=47 Link to comment Share on other sites More sharing options...
rtomek Posted February 4, 2008 Share Posted February 4, 2008 What video driver are you using? I used natit and I couldn't wake from sleep, but used NVInject and everything worked on this mobo. Link to comment Share on other sites More sharing options...
Miro30 Posted February 15, 2008 Share Posted February 15, 2008 Hi, I am french so sorry for my bad english but I haven't found on the french forum.I have a P5WDH Deluxe motherboard with the latest bios I have just install Leopard Kalyway with vanilla kernel and acpi fix on a fresh partition (no programme installed) My bios configuration is: Microcode Updation [Enabled] Max CPUID Value Limit [Disabled] Execute Disable Function [Enabled] Enhanced C1 Control [Auto] CPU Internal Thermal Control [Auto] Virtualization Technology [enabled] intel speedstep enabled Chipset: Hyper Path 3: [Disabled] Memory Remap Feature [Enabled] Onboard Devices Configuration: JMicron Controller Mode [AHCI] PCIPnP: Plug And Play O/S [Yes] Power: Suspend Mode [s3 only] Repost Video on S3 Resume [No] ACPI 2.0 Support [Yes] ACPI APIC support [Enabled] chipset hyperpath 3 disabled memory remap enabled aiquiet disabled Is it possible that a P5WDH user write his bios configuration if sleep is correct on his hackintosh ? Thanks for all I used the NVInject and everything worked on this mobo as well. Make sure that you place the video card vendor # and device ID# in the NVinject.kext script, otherwise, sleep won't work. Example: ATI Radeon X1900 XT: Chipset Model: ATY,RadeonX1900 Type: Display Bus: PCIe Slot: Slot-1 PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Use these two lines Device ID: 0x7249 Revision ID: 0x0000 ROM Revision: 113-A52027-140 EFI Driver Version: 01.00.140 Link to comment Share on other sites More sharing options...
MacNewbieBoyUK Posted February 26, 2009 Share Posted February 26, 2009 What about if you are using EFI strings instead on NVInject? Link to comment Share on other sites More sharing options...
Recommended Posts