Intel Wireless 2100, 2200bg, 2915bg, 3945abg, 4965agn

[Ruud]

Oke log for 864 IWI 4965, the system.txt is the log for the one using kextload... will post a second log in a min, from booting with the kext installed... ooh i get a scan complete in the system.txt log

 

Apr 27 18:10:19 Mac-Pro kernel[0]: ieee80211_scan_completed

 

ooh and using network selector, starting a scan only worked one time,, after dat i got configuration error

 

Apr 27 18:11:39 Mac-Pro kernel[0]: error iwl4965: Error setting new configuration (-60).

 

when starting a new scan again

 

and got a KP when booting with the kext installed

 

Damn, that KP destroyed something important... Can't boot anymore and have to rëinstall again.. Will install now with a leo4all disk, maybe somthing different with the kext than the kalyway I used this time, and get other test results. Im back within two hours

system.txt

KP_PIC.zip

[nordix]

iwi3945, rel 864

 

First reboot gives me freeze, second is ok

 

Attach logs and freeze shot

 

After manual switching off and on scan gives me errors like this:

 

Apr 27 21:26:55 78-106-194-148 kernel[0]: IOPCCard debug: en1: scan channel 128 (5640 MHz)

Apr 27 21:26:55 78-106-194-148 kernel[0]: IOPCCard debug: en1: failed to set channel 128 (5640 MHz) for scan

ioreg.txt

dmesg.txt

system.txt.zip

[jalavoui]

both driver will try to start scanning within a 3 seconds delay

all you have to do is check whats going on in logs

 

iwi3945 rel 865

iwi4965 rel 866

[nordix]

iwi3945, rel 865

 

First time - KP on reboot (shot attached), then ok, w/o any freeze

 

Scanning all the time, even without networkSelector. Is it normal?

dmesg.txt

system.txt.zip

ioreg.txt

[jalavoui]

looks like yor card wants to associate to a network

[Z00L]

Hi all

First of all, let me thank you for you hard working in making this drivers(kexts) to work.

 

I understand you are atm, much more occupied with iwi3945 and iwi4965 but if anyone could give me a hand with iwi2200 it would be much appreciated.

 

I can get the kext loaded fine, but after selecting my WiFi, it's always get stuck while getting an IP Address

 

I've tried with wep secured, no password at all, in mixed mode (g+, only g, only b, and channels 1, 6 and 11 but still no dice.

 

Do you guys have any additional advice/tip for me?

 

Thank you in advance.

 

Note: I'm using Kalyway 10.5.1 and the latest stable iwi2200 driver (rev 782) with a router Linksys WRT54GC 2.0

 

EDIT: nvm...got it to work...thanks anyway, keep it up

[nordix]

Home router is always on and at least 3 public wifi networks are in range of my card. And no real ssid, only on init scan after reboot.

[jalavoui]

anyone knows howto write this code:

skb_set_mac_header(skb, 0);

skb_set_network_header(skb, 0);

?

 

never mind...

 

try this

the scan calls are very hacked - i'll deal with that later

networkselector is disabled

 

iwi3945 rel 867

iwi4965 rel 868

 

iwi2200 os x 10.5

need someone to post last svn release dmg

[pere]

Hi! REL iwi 3945 856 Freeze on boot or KP on normal operation.

27/04/08 22:12:25 kernel iwl3945: U iwl3945_tx_skb station Id 24

27/04/08 22:12:25 kernel iwl3945: U iwl3945_build_tx_cmd_hwcrypto Tx packet in the clear (encrypt requested).

 

Wants to associate!,

coulnt boot normally, very good log catched booting safe mode manual load, have find this too:

 

27/04/08 22:12:38 kernel error iwl3945: Too many chunks: i

27/04/08 22:12:49 kernel IOPCCard debug: en1: failed to restore operationalBSSID after scan

27/04/08 22:12:51 kernel 0000000000 0x000000be 0118

27/04/08 22:12:51 kernel error iwl3945: 0000000130 0x00000000 0651

27/04/08 22:12:51 kernel error iwl3945: 0000000151 0xffffff59 0454

27/04/08 22:12:51 kernel error iwl3945: 0000000152 0x00000000 0472

27/04/08 22:12:51 kernel error iwl3945: 0000000173 0x000000c5 0104

27/04/08 22:12:51 kernel error iwl3945: 0000017869 0x00000000 0401

27/04/08 22:12:51 kernel error iwl3945: 0000017871 0x00000100 0125

 

But there is alot of improvement!!

Manual load log attached.

manual_load.txt

iwi3945.kext.zip

[Ruud]

iwi4965 rel 868 will cause KP on boot. Will post a kextload log soon.

[nordix]

rel 865 was too buggy - mostly KP on normal reboots and freezes on -v -f (but not always). One of freezes attached

Even xcode doesn't work with this kext

[jalavoui]

ok

next step is to remove the scan hack and test the driver

search for

//return rc;

replace with

return rc;

 

one of this ways is better - check and report

[pere]

iwi 3945 rel 867, KP on boot, im going to test the hack.

 

Picture (horrible, i know) attached.

 

EDIT: Tried hack, no more kp, got this logs.

Manual_load_with_hack.txt

reboot_with_hack_log.txt

iwi3945.kext.zip

[nordix]

rel 867 gives me KP just after loading gui - only blue screen and no more byte

 

Update: uncommenting "//return rc" -> another freeze

 

Update 2: pere's kext -> KP

[Ruud]

ok here the log for kexloading the newest 4965... bbooting with this kext causes KP

 

 

oke i know what caused the KP.... the Kext somehow created et0 one time, and another eth1 again one time when using kextload.. i removed eth 0 and no KP anymore

system__kextload.txt

[jalavoui]

iwi3945 rel 869

iwi4965 rel 870

 

hacked scan for now

[Ruud]

iwi3945 rel 869

iwi4965 rel 870

 

hacked scan for now

 

 

jalavoui, can you set a timer between that scan loop, i had a scan complete notification, but when i wanted to copy the log it was gone and filled with new scans. Ill retry a reboot to get the log faster if its again there

 

ohh this was not for this rel, but for the version before

 

 

ok dont mind me... i get KP's again, somehow it gives me eth1 not running even now i applied it in network prefs.

 

will test around with removing the eth1 interface

[nordix]

iwi3945, rel 869 -> freeze on boot (or KP)

[jalavoui]

mbuf bug fix

 

iwi3945 rel 871

iwi4965 rel 782

 

better get syste.log from console - the driver will give lots of messages (use reload)

might get a kp

[pere]

Rel 869 or 871... not sure XD you are so fast, Javalui.

 

Reboot log.

 

Anyway, will build 871 and try again.

 

EDIT: 871, 3 KP 1 normal reboot, log attached, will continue trying this one to try to catch the kp...

reboot.txt

Reboot_871_log.txt

[Lofn]

iwi4965 r872

 

No KP message on restart, just locks up before reaching the login window.

system.log.txt

[Ruud]

oke log for iwi4965 rel 872

 

think this is a nice log jalavoui.. but i also think the scans are comming to fast after each other.. and that causes the eth1 errors

 

Apr 28 01:08:55 Mac-Pro kernel[0]: IOPCCard debug: en1: failed to set channel 132 (5660 MHz)

 

but im not sure, what do you think?

 

oke system- reboot... more info in log after reboot

 

will call it a night now... see you all tomorrow.

 

PS jalavoui, can you slow the scans a little, my logs are getting very big very fast because of the scan rate atm, and after a reboot the system.log almost contains scan lines only because of it.

system.txt

system___reboot.txt

[nordix]

iwi3945 rel 871 -> kp (logs and shot below)

 

P.S. It's 3:14 now in Moscow, so I have to go, see you later. Good luck and less bugs! До свиданья!

ioreg.txt

dmesg.txt

system.txt

[pere]

iwi 3945 871.

Catched 2 KP.

 

Please, help to test.

[@irBOrNE]

iwi2200 os x 10.5

need someone to post last svn release dmg

 

Does anyone have the capability to do this so the latest dmg can be put onto the SVN for us to test? Also a question, I keep seeing the Revision number in the iwi2200-osx10.5/ folder increase.. Is that because there is active further development on that specific driver, or just because of the revision numbers increasing for 3945 & 4965 development?