TNW Posted March 3, 2008 Share Posted March 3, 2008 I only work on the 3945.Sorry. Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653038 Share on other sites More sharing options...
jalavoui Posted March 3, 2008 Author Share Posted March 3, 2008 a simple way to make logs: download from iwidarwin http://iwidarwin.googlecode.com/files/getlogs4.command.zip unzip and double click the getlogs4.command file. log files are in folder / zip ip (if they're too large) and upload it here i hope you're all here to post logs i think iwi2200 as some bugs in 2915 card - test it and post results if someone with the 4965 card likes to start developing - check source code with TNW, Symuc Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653054 Share on other sites More sharing options...
abidin Posted March 3, 2008 Share Posted March 3, 2008 there you go TNW, my three log: 1 error iwl3945: U iwl3945_power_init_handle Initialize power error iwl3945: U iwl3945_power_init_handle adjust power command flags Finished nic_set_pwr_src error iwl3945: U iwl3945_load_bsm Begin load bsm error iwl3945: U iwl3945_verify_bsm Begin verify bsm error iwl3945: U iwl3945_verify_bsm BSM bootstrap uCode image OK error iwl3945: U iwl3945_load_bsm BSM write complete, poll 1 iterations error iwl3945: U __iwl3945_up iwl3945 is coming up error iwl3945: U iwl3945_mac_open Start UP work. error iwl3945: U iwl3945_isr ISR inta 0x80000009, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 1, i = 0, REPLY_ALIVE, 0x01 error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x9 error iwl3945: U iwl3945_rx_reply_alive Initialization Alive received. __ IN iwl3945_init_alive_start __ error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668 error iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM error iwl3945: U iwl3945_init_alive_start Initialization Alive received. error iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set. __ OUT iwl3945_init_alive_start __ error iwl3945: U iwl3945_isr ISR inta 0x80000009, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01 error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0 error iwl3945: U iwl3945_rx_reply_alive Runtime Alive received.GFX0: match category IOFramebuffer exists GFX0: family specific matching fails __ IN iwl3945_alive_start __ error iwl3945: U iwl3945_alive_start Runtime Alive received. error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524 error iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM error iwl3945: U iwl3945_alive_start RFKILL status: 0x1 error iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM error iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels. IOPCCard info: iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels error iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008 error iwl3945: U iwl3945_update_power_cmd Tx timeout = 0 error iwl3945: U iwl3945_update_power_cmd Rx timeout = 0 error iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 } error iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4 Wait POWER_TABLE_CMD Condition: 0ms left error iwl3945: Error sending POWER_TABLE_CMD: time out after 50ms. error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4 Wait REPLY_BT_CONFIG Condition: 0ms left error iwl3945: Error sending REPLY_BT_CONFIG: time out after 50ms. error iwl3945: U iwl3945_commit_rxon Sending RXON * without RXON_FILTER_ASSOC_MSK * channel = 1 * bssid = 00:00:00:00:00:00Wait START_ALIVE Condition: 0ms left Wait for START_ALIVE timeout after 200ms. error iwl3945: U iwl3945_mac_open leave - failed PXSX: family specific matching fails dsmos: Initializing... dsmos: Hook and decryption contexts set! dsmos: Starting... error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4 LPCB: family specific matching fails Wait REPLY_RXON Condition: 0ms left error iwl3945: Error sending REPLY_RXON: time out after 50ms. error iwl3945: Error setting new configuration (-60). error iwl3945: U iwl3945_alive_start ALIVE processing complete. __ OUT iwl3945_alive_start __ NTFS driver 2.1 [Flags: R/O]. NTFS volume name Vista, version 3.1. display: Not usable NTFS volume name Datos, version 3.1. gios-vgn-nr150fe:~ gio$ 2 error iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM error iwl3945: U iwl3945_init_alive_start Initialization Alive received. error iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set. __ OUT iwl3945_init_alive_start __ error iwl3945: U iwl3945_isr ISR inta 0x80000009, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01 error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0 error iwl3945: U iwl3945_rx_reply_alive Runtime Alive received. __ IN iwl3945_alive_start __ error iwl3945: U iwl3945_alive_start Runtime Alive received. error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524 error iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM error iwl3945: U iwl3945_alive_start RFKILL status: 0x1 error iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM error iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels. IOPCCard info: iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels error iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008 error iwl3945: U iwl3945_update_power_cmd Tx timeout = 0 error iwl3945: U iwl3945_update_power_cmd Rx timeout = 0 error iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 } error iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4 GFX0: family specific matching fails display: family specific matching fails Wait POWER_TABLE_CMD Condition: 0ms left error iwl3945: Error sending POWER_TABLE_CMD: time out after 50ms. error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4 Wait REPLY_BT_CONFIG Condition: 0ms left error iwl3945: Error sending REPLY_BT_CONFIG: time out after 50ms. error iwl3945: U iwl3945_commit_rxon Sending RXON * without RXON_FILTER_ASSOC_MSK * channel = 1 * bssid = 00:00:00:00:00:00 error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4 Wait REPLY_RXON Condition: 0ms left error iwl3945: Error sending REPLY_RXON: time out after 50ms. error iwl3945: Error setting new configuration (-60). error iwl3945: U iwl3945_alive_start ALIVE processing complete. __ OUT iwl3945_alive_start __ Wait START_ALIVE Condition: 46ms left 3 iwl3945_rx_reply_alive Initialization Alive received. __ IN iwl3945_init_alive_start __ error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668 error iwl3945: U iwl3945_verify_ucode Initialize uCode is good in inst SRAM error iwl3945: U iwl3945_init_alive_start Initialization Alive received. error iwl3945: U iwl3945_set_ucode_ptrs Runtime uCode pointers are set. __ OUT iwl3945_init_alive_start __error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 GFX0: family specific matching fails GFX0: family specific matching fails Alkor: Starting. Chosen model GMA X3100 Alkor: Setting built-in=<data not shown> Alkor: Setting AAPL,HasPanel=<data not shown> Alkor: Setting AAPL,SelfRefreshSupported=<data not shown> Alkor: Setting AAPL,NumFramebuffers=<data not shown> Alkor: Setting AAPL,NumDisplays=<data not shown> Alkor: Setting AAPL01,Depth=<data not shown> Alkor: Setting AAPL01,Pipe=<data not shown> Alkor: Setting AAPL01,DataJustify=<data not shown> fRegisters at 0x3d9b8000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000009, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 2, i = 1, REPLY_ALIVE, 0x01 error iwl3945: U iwl3945_rx_reply_alive Alive ucode status 0x00000001 revision 0x1 0x0 error iwl3945: U iwl3945_rx_reply_alive Runtime Alive received. display: family specific matching fails__ IN iwl3945_alive_start __ error iwl3945: U iwl3945_alive_start Runtime Alive received. error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 900 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 2668 error iwl3945: U iwl3945_verify_inst_sparse ucode inst image size is 80524 error iwl3945: U iwl3945_verify_ucode Runtime uCode is good in inst SRAM error iwl3945: U iwl3945_alive_start RFKILL status: 0x1 error iwl3945: U iwl3945_init_channel_map Initializing regulatory info from EEPROM error iwl3945: U iwl3945_init_channel_map Parsing data for 56 channels. IOPCCard info: iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels error iwl3945: U iwl3945_update_power_cmd Flags value = 0x00000008 error iwl3945: U iwl3945_update_power_cmd Tx timeout = 0 error iwl3945: U iwl3945_update_power_cmd Rx timeout = 0 error iwl3945: U iwl3945_update_power_cmd Sleep interval vector = { 0 , 0 , 0 , 0 , 0 } error iwl3945: U iwl3945_enqueue_hcmd Sending command POWER_TABLE_CMD (#77), seq: 0x0400, 36 bytes at 0[0]:4 display: family specific matching fails Alkor: Starting. Chosen model GMA X3100 Alkor: Setting built-in=<data not shown> Alkor: Setting AAPL,HasPanel=<data not shown> Alkor: Setting AAPL,SelfRefreshSupported=<data not shown> Alkor: Setting AAPL,NumFramebuffers=<data not shown> Alkor: Setting AAPL,NumDisplays=<data not shown> Alkor: Setting AAPL01,Depth=<data not shown> Alkor: Setting AAPL01,Pipe=<data not shown> Alkor: Setting AAPL01,DataJustify=<data not shown> Wait POWER_TABLE_CMD Condition: 0ms left error iwl3945: Error sending POWER_TABLE_CMD: time out after 50ms. error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_BT_CONFIG (#9b), seq: 0x0401, 16 bytes at 1[1]:4 Wait REPLY_BT_CONFIG Condition: 0ms left error iwl3945: Error sending REPLY_BT_CONFIG: time out after 50ms. error iwl3945: U iwl3945_commit_rxon Sending RXON * without RXON_FILTER_ASSOC_MSK * channel = 1 * bssid = 00:00:00:00:00:00 error iwl3945: U iwl3945_enqueue_hcmd Sending command REPLY_RXON (#10), seq: 0x0402, 48 bytes at 2[2]:4 Wait REPLY_RXON Condition: 0ms left error iwl3945: Error sending REPLY_RXON: time out after 50ms. error iwl3945: Error setting new configuration (-60). error iwl3945: U iwl3945_alive_start ALIVE processing complete.Wait START_ALIVE Condition: 69ms left error iwl3945: U iwl3945_mac_open leave PXSX: family specific matching fails __ OUT iwl3945_alive_start __ dsmos: Initializing... dsmos: Hook and decryption contexts set! dsmos: Starting... NTFS driver 2.1 [Flags: R/O]. NTFS volume name Vista, version 3.1. display: Not usable NTFS volume name Datos, version 3.1. without problem to load the driver Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653090 Share on other sites More sharing options...
TNW Posted March 3, 2008 Share Posted March 3, 2008 Many thank's ( the driver doesn't load on your hardware) Can someone post other logs please ? Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653099 Share on other sites More sharing options...
parasito Posted March 3, 2008 Share Posted March 3, 2008 My logs. logs.zip Hope it helps. Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653160 Share on other sites More sharing options...
TNW Posted March 3, 2008 Share Posted March 3, 2008 My logs. logs.zip Hope it helps. Yes it helps , the driver works on your hardware ESSID:WLAN_A1 thank you! Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653177 Share on other sites More sharing options...
parasito Posted March 3, 2008 Share Posted March 3, 2008 Yes it helps , the driver works on your hardware ESSID:WLAN_A1 thank you! Yes, thats my AP!!! If you need more test just tell me. Thanks Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653184 Share on other sites More sharing options...
abidin Posted March 3, 2008 Share Posted March 3, 2008 what is the problem con my hardware TNW? Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653185 Share on other sites More sharing options...
TNW Posted March 3, 2008 Share Posted March 3, 2008 Maybe you are unlucky and the driver failed to start properly when you tested it . Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653188 Share on other sites More sharing options...
jalavoui Posted March 3, 2008 Author Share Posted March 3, 2008 TNW, Symuc i think the driver will be more stable if it waits for the interface to be attached before calling iwl3945_bg_up(). to do this you'll have to try to use a similiar function of check_firstup() from iwi2200. mac os always tries to bring the interface up - it calls the enable(),outputpacket() - after this call it is ok to call iwl3945_bg_up(). note that this works for IOEthernetController. maybe it's the same for IO80211Controller. you can also try to use the p_disable=1 in the info.plist (need to write new code for this) check if iwl3945_bg_rf_kill() status on/off can make the driver work wrong. if it is off you can't call iwl3945_bg_up() just notice that skb_len() might fail - try to use return mbuf_pkthdr_len(skb->mac_data); //not shure about this.need to test take care with mbuf_len()/mbuf_pkthdr_len() declarations - they can give lots of bugs check skb_clone() to see if it works for mbufs with chains! if the driver receives/transfer packets with chains try to use iwi2200 mergePacket() the iwi2200 driver never receives mbufs with chains but when it sends packets from outputpacket() you get mbuf with chains and need to use mergePacket(). if iwi3945 as the same behaviour the rx/tx packet code will be easy to write Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653202 Share on other sites More sharing options...
TheMarine Posted March 3, 2008 Share Posted March 3, 2008 Yes, thats my AP!!! If you need more test just tell me. Thanks your ap? what type of security do you use? Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653203 Share on other sites More sharing options...
y2kkirb Posted March 3, 2008 Share Posted March 3, 2008 Here are my logs. The driver loaded up fine every time. Logs.zip Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653208 Share on other sites More sharing options...
abidin Posted March 4, 2008 Share Posted March 4, 2008 i re-install the driver, using myload.command and get this: gios-vgn-nr150fe:~ gio$ sudo dmesg 45_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE72B0C295E67E2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 231, i = 230, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE72C0C2FE027F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 232, i = 231, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE72D0C289247F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 233, i = 232, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE72E0C2EF457F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 234, i = 233, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE72F0C23D637F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 235, i = 234, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE7200C317867F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 236, i = 235, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE7210C31FA37F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 237, i = 236, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE7220C30DC67F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler error iwl3945: U iwl3945_isr ISR inta 0x80000008, enabled 0xaa00008b, fh 0x00010000 error iwl3945: U iwl3945_irq_tasklet TASKLET : inta 0x80000008, enabled 0x00000000, fh 0x00010000 error iwl3945: U iwl3945_rx_handle r = 238, i = 237, REPLY_3945_RX, 0x1b iwl3945_rx_reply_rx todo ieee80211_rx_irqsafe 80000000FFFFFFFFFFFF001B1188AE72001B1188AE7230C32DE47F2B9901000008003104000A6368 F636F6C61746573010482848B960301010504000100002A010032088C129824B048606CTODO ieee80211_tasklet_handler gios-vgn-nr150fe:~ gio$ Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653218 Share on other sites More sharing options...
TNW Posted March 4, 2008 Share Posted March 4, 2008 Oh, I forgotten to say that you have to reboot after each test , it's an other problem of driver. @Jalavoui : I tested the p_enable and skip the rf_kill but nothing changed , I think it's a problem of DMA , but I don't know what :/ Ok now I think it's working on all hardware , but not all the time :/ ( chcolates XD funny AP) Thank's all of you! Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653224 Share on other sites More sharing options...
y2kkirb Posted March 4, 2008 Share Posted March 4, 2008 ok, here are 2 more logs after i rebooted. test2.txt test3.txt Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653250 Share on other sites More sharing options...
ulyanov77 Posted March 4, 2008 Share Posted March 4, 2008 Not sure if I was testing correctly for the latest driver post by tnw, but here's what I got. EDIT after a reboot and another test, I think this test is good (just comparing with other successful tests) Archive.zip winner.zip Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653447 Share on other sites More sharing options...
vietboi821 Posted March 4, 2008 Share Posted March 4, 2008 Hello all, I tired making logs as per: http://forum.insanelymac.com/index.php?showtopic=71779 But when I did -s at bootloader and got to the screen, I was unable to do the next command "sh /etc/rc" And when I decided to try the command printer for kicks, it said I didnt have permission to write. I checked my os x partition and I couldn't find folders /etc/ in the root either... Am i missing something? Thanks! Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653538 Share on other sites More sharing options...
parasito Posted March 4, 2008 Share Posted March 4, 2008 your ap? what type of security do you use? I mean that is my ESSID. I use WPA2. Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653564 Share on other sites More sharing options...
azuwis Posted March 4, 2008 Share Posted March 4, 2008 my 1st log, load the kext in the running system, not reboot using single mode. I will post the 2nd and 3rd log after reboot. log1.zip Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653640 Share on other sites More sharing options...
EgoDeath Posted March 4, 2008 Share Posted March 4, 2008 Thank you thank you thank you thank you thank you thank youuuuuu sooo much!!! Seriously though. i have the 3945 and by god i am so happy that you guys are putting your time and effort into this. I will test and submit my logs as soon as i can (iv been up all night, need sleep first) i have an acer 4202, and it will be so friggin happy with you guys.. eeeeeeeee i cant wait, but will happily look forward to testing. Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653649 Share on other sites More sharing options...
Megnus Posted March 4, 2008 Share Posted March 4, 2008 Do you first install the drivers, and then get the logs? Or just post log of your spesific system? Can I give help someway? I have Dell XPS M1710 Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653686 Share on other sites More sharing options...
croqodil Posted March 4, 2008 Share Posted March 4, 2008 This is absolutely great. Everyday i checked this thread to see an update on the progress for the 345. Can't wait to see my wirelesscard working on OS X. Keep going the good work. Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653696 Share on other sites More sharing options...
EgoDeath Posted March 4, 2008 Share Posted March 4, 2008 Ok, i couldn't wait. (3945) here are my Logs. i had a random Kernel panic on my 3rd reboot, so i just rebooted again and all was fine. i dont see this card showing up anywhere though (does it not load for me?) Meh, i could care less, what with elite coderz on the case Cheers All_3_Reboot_Logs.zip Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653731 Share on other sites More sharing options...
TheMarine Posted March 4, 2008 Share Posted March 4, 2008 Ok, i couldn't wait. (3945) here are my Logs. i had a random Kernel panic on my 3rd reboot, so i just rebooted again and all was fine. i dont see this card showing up anywhere though (does it not load for me?) Meh, i could care less, what with elite coderz on the case Cheers Don't worry. This is just trying to start properly the card and testing if you receive some beacons. It's not going to be recognized by any other sw. But it's a huge step. ;D Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653735 Share on other sites More sharing options...
xpisik Posted March 4, 2008 Share Posted March 4, 2008 Acer Extensa 5513 NWLMI Core 2 Duo 1.66, Intel 950, 1GB RAM, 120 GB HDD, Realtek Audio HDA, Broadcom Ethernet, Intel 3945 Wireless My Logs. Logs.zip Link to comment https://www.insanelymac.com/forum/topic/84072-intel-wireless-2100-2200bg-2915bg-3945abg-4965agn/page/13/#findComment-653814 Share on other sites More sharing options...
Recommended Posts