callPlayer Posted March 19, 2008 Share Posted March 19, 2008 Hi NSCXP2005, I've tried with both physical and emulated DVD's, but I've only reached the blue screen with the physical one. I've also tried with both 64 bit and 32 bit operating systems, and with both I get stuck before installation. Something curious is that the second configuration file from Donk hasn't worked for me, only the first one. I also get every time the message saying that the guest operating system has sent an ATAPI message to the DVD drive and that that functionality is not configured on the virtual machine (I believe it's the same BSD error Major 14, Minor 4 you get). How much time did it took to load the installer? What processor do you have? Thanks Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-673997 Share on other sites More sharing options...
NSCXP2005 Posted March 19, 2008 Share Posted March 19, 2008 it was really quick to load up installer, I have a 2.0 core2duo, 2GB Ram. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-674032 Share on other sites More sharing options...
NSCXP2005 Posted March 19, 2008 Share Posted March 19, 2008 Sorry for the double post. Donk have you had any luck with this installing successfully for the start? also which is the best version of VMWare Workstation to use? Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-674091 Share on other sites More sharing options...
callPlayer Posted March 19, 2008 Share Posted March 19, 2008 Hi, NSCXP2005 Do you get a message saying that your processor is VT capable and that you must enable it when you start a virtual machine configured for 64-bit os? Do you know how to enable VT? Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-674138 Share on other sites More sharing options...
NSCXP2005 Posted March 20, 2008 Share Posted March 20, 2008 Hi callPlayer, I have only used Donk's config file, where would I get the message? would it be in the debug section of the iATKOS Install? Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-674671 Share on other sites More sharing options...
callPlayer Posted March 20, 2008 Share Posted March 20, 2008 Hi everyone, Someone who has already been successfull with this install, please upload the entire virtual machine somewhere. Please, please, please!!!!! Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-675349 Share on other sites More sharing options...
NSCXP2005 Posted March 20, 2008 Share Posted March 20, 2008 please please can somebody help us all get this working Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-675429 Share on other sites More sharing options...
NSCXP2005 Posted March 21, 2008 Share Posted March 21, 2008 Donk, Please please can you make a step by step guide with pictures of how to successfully install the OS on VMWare Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-675709 Share on other sites More sharing options...
freeyayo50 Posted March 26, 2008 Share Posted March 26, 2008 All I have access to this http://www.virtualization.info/2008/03/vmw...tures-list.html beta and I can tell you it is far more reliable. Once it is in public beta I will create a tutorial with pictures on setting this up. Yea please, I can wait till your tutorial drops. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-683054 Share on other sites More sharing options...
host254 Posted March 27, 2008 Share Posted March 27, 2008 im at the half of the installation. But the install process is hanging, at the half. when i look in to the installer log, i becomt the folowing messafge: idle 10 min with 1 open connection what does this mean ?? Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-684933 Share on other sites More sharing options...
MTS Posted March 27, 2008 Share Posted March 27, 2008 I got iATKOS v1.0i R2 to successfully install on my Sony VAIO VGN-FZ190E/B on the second time around. My problem now is figuring out how to boot into it. I didn't backup my MBR, so that got corrupted during the installation. I just today installed GRUB on it, and now I can boot into Windows XP without using the GParted LiveCD I was using. If anyone knows how to boot into OS X with GRUB or another bootloader, please let me know. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-685477 Share on other sites More sharing options...
Donk Posted March 29, 2008 Author Share Posted March 29, 2008 This is about running in VMware. I think there are other threads on this. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-687620 Share on other sites More sharing options...
Donk Posted April 2, 2008 Author Share Posted April 2, 2008 The beta of WS 6.5 is now available to all. I have just installed it and will check on how well it runs Leopard this afternoon. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-693021 Share on other sites More sharing options...
sanriofreak Posted April 2, 2008 Share Posted April 2, 2008 The beta of WS 6.5 is now available to all. I have just installed it and will check on how well it runs Leopard this afternoon. Great! I'll be interested to see the results. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-693182 Share on other sites More sharing options...
Donk Posted April 3, 2008 Author Share Posted April 3, 2008 Bad news it breaks my installation on RDTSC calls. Will investigate further. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-694205 Share on other sites More sharing options...
cz2 Posted April 5, 2008 Share Posted April 5, 2008 I was able to install iatkos on vmware workstation ace following your instructions . however, i am not able to get networking working. In OSx is looks like the network card is detected, but it says that the cable is unplugged. I followed the directions for the maxx drivers and i am using your config file. Any advice how to get networking working? Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-696751 Share on other sites More sharing options...
Donk Posted April 17, 2008 Author Share Posted April 17, 2008 Most of the work on VMware and Leopard is now going on in this thread http://forum.insanelymac.com/index.php?showtopic=96277 Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-712496 Share on other sites More sharing options...
bigwh00p Posted April 23, 2008 Share Posted April 23, 2008 Bad news it breaks my installation on RDTSC calls. Will investigate further. How far into the installation does it stop? I'm installing it as I type this and I'm at the half-way point in the installtion. Thanks Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-720992 Share on other sites More sharing options...
dony1234 Posted May 13, 2008 Share Posted May 13, 2008 hey this work perfectly on my asus notebook with sound and ethernet thanks anyquestions? email joshua.donvito@gmail.com Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-744965 Share on other sites More sharing options...
Donk Posted May 29, 2008 Author Share Posted May 29, 2008 Have tested with iATKOS 2.0i and works OK, but a little slow. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-762304 Share on other sites More sharing options...
decrypt Posted July 23, 2008 Share Posted July 23, 2008 Hi, I am getting the following error trying to install iATKOS_v2.0i in Vmware Workstation 6.5. hfs_mount failed: 5 nfs_boot : networking is not initialized panic(cpu 0 caller 0x002D88DE): "nfs_boot_init failed with 6\n"@/Volumes/disk1s2/leo_xnu/xnu-1228/bsd/nfs/nfs_vfsops.c:851 Debugger called: <panic> Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-830160 Share on other sites More sharing options...
playincard Posted August 15, 2008 Share Posted August 15, 2008 Thanks a bunch, Donk - I'll be trying this as soon as I get home today. I really appreciate your excellent, professional tutorials and follow-up support. Edit: will be trying with iATKOS 4i ... has anybody attempted/succeeded with this latest version of iATKOS? Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-857669 Share on other sites More sharing options...
spacesp Posted August 16, 2008 Share Posted August 16, 2008 i always come to the blue screen with bubles but then it has stuck again x( nyone found a solution? Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-858733 Share on other sites More sharing options...
piabao Posted August 19, 2008 Share Posted August 19, 2008 Same here.... "Blue bubbles screen en rolling beach ball....." but no progress. Any help? Tried -v, -x, -f and cpus=1; all with the same result. Setup: - HP dv9000 with Vista - VMWare workstation 6.0.4 build 93057 - iATKOS_4i.iso Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-861353 Share on other sites More sharing options...
scotxy Posted October 26, 2008 Share Posted October 26, 2008 I have Dell D620 with Intell wireless and Nvidia video 2 gig of memory. I was able to get Iatkos 10.5.4 to work after like 6 reboots but the video was low resolution. could not update it. Anyone have any suggestions this is new to me and i just have the dvd frind gave me. Link to comment https://www.insanelymac.com/forum/topic/81721-iatkos-10-r2-installation-instructions/page/3/#findComment-944462 Share on other sites More sharing options...
Recommended Posts