Amuso Posted January 6, 2008 Share Posted January 6, 2008 Hi, Thought I would ask if anyone happened to have a print board from a defective drive. I need a working PCB from a Seagate 250GB 7200.8 IDE drive. It MUST be the 7200.8 model. The print board is removed by unscrewing 6 torx screws from the drive, and has the following digits printed into the underside : 100354297 REV A. If you happened to have such a board/drive you do not need, please PM me. Thanks Link to comment Share on other sites More sharing options...
~pcwiz Posted January 6, 2008 Share Posted January 6, 2008 I found your drive model on eBay here. That one is the only one on eBay right now but it costs $153 which is considerably expensive if you just want the PCB board. But I did find this UK site that has the PCB board you want for sale here. And its somewhat cheaper than buying the entire drive but its not too cheap. Link to comment Share on other sites More sharing options...
Amuso Posted January 9, 2008 Author Share Posted January 9, 2008 Thanks! Appriciate it. I am keeping an eye on eBay to see if something cheaper comes along. Good link to keep for parts there in the UK Link to comment Share on other sites More sharing options...
nagal Posted January 9, 2008 Share Posted January 9, 2008 I think I have that exact same hard drive. I will check when I get home and if the price is right I will be willing to part with it. Link to comment Share on other sites More sharing options...
nagal Posted January 10, 2008 Share Posted January 10, 2008 Well mine is a 7200.8 but it is a SATA drive. Link to comment Share on other sites More sharing options...
Amuso Posted January 25, 2008 Author Share Posted January 25, 2008 Thanks, but I am not sure if a SATA board will work on an IDE drive. There seems to be more of these poping up on eBay so I am getting a little bit more hope... Link to comment Share on other sites More sharing options...
Recommended Posts