Jump to content

Q6600, 8800GTS (G80), P5K Deluxe WiFi

rawmassen

By rawmassen,
in Hardware Components and Drivers

 Share
29 posts in this topic

Recommended Posts

rawmassen
rawmassen
Posted
Posted

Other than the ToH RC2 release, along with mac.nubs Leopard NVInject (for the 8800 of course), do I need anything else to be able to run with sound and networking?

 

The P5K Deluxe WiFi uses Realtek and Yukon network devices, with Realtek HD audio.

 

2x SATA HDD's, 1x SATA DVD drive.

 

If someone can point me to the drivers I need (and they work), I'll happily throw them a gift via PayPal :blink:

fustyler
fustyler
Posted
Posted

The script you need to get sound and network working is available at

http://rapidshare.com/files/67089602/p5ke_leopard.zip

 

This is what I used to get ToH working on my Asus P5k-e.

 

More info can be found on this thread:

http://forum.insanelymac.com/index.php?sho...&pid=496784

rawmassen
rawmassen
Posted
  • Author
Posted
The script you need to get sound and network working is available at

http://rapidshare.com/files/67089602/p5ke_leopard.zip

 

This is what I used to get ToH working on my Asus P5k-e.

 

More info can be found on this thread:

http://forum.insanelymac.com/index.php?sho...&pid=496784

 

Thanks, will give this a shot at the weekend.

 

We have similar setups btw - 3.7Ghz, very nice. SCALR G0 stepping Q6600?

  • 2 weeks later...
antiriad
antiriad
Posted
Posted

I have the same problem there were no way to install leopard on my p5k deluxe

I tried with de brazil mac version and the toh version.

with the toh version I could install in a albatron I845. but I can make it work on my pc

rawmassen
rawmassen
Posted
  • Author
Posted
I successfully install leopard using flat image but not get builtin network card & audio working. My motherboard is Asus P5K. Anybody have the drivers?

 

Search for asap18's threads, he released drivers for that board, and a member posted the link.

antiriad
antiriad
Posted
Posted

"I have the same problem there were no way to install leopard on my p5k deluxeI tried with de brazil mac version and the toh version.with the toh version I could install in a albatron I845. but I can make it work on my pc"Sorry I must correct myself I wanted to say that I Can´t make it work on my pc.it install all the files, but when i have to restart and in that part the tutorial seid " Do not boot into leopard yet!!!" when you must start the setup program in verbose mode (-v), none storage device seem to be recognized. no pen drive, formated in fat 32 named PATCHER as the tutorial indicate.no files in "/Volumes". what I´m doing wrong ?and I try both version installing from the very beginning and try to update from tiger.I follow the guide posted by nateleav76.same help ?any ideas ?please I wanna have leopard.

A couple of guys on this forum have P5K Premiums working (exact same HW as Deluxe), so it's entirely possible. I'm installing tonight, I'll post a guide for my setup once complete.
I´ll be wainting ancious for you guide to be post.did you have sucess ?
deleted_account
deleted_account
Posted
Posted
A couple of guys on this forum have P5K Premiums working (exact same HW as Deluxe), so it's entirely possible. I'm installing tonight, I'll post a guide for my setup once complete.

 

 

Thanks rawmassen, for the confirmation, I look forward to your post and guide.

VenimK
VenimK
Posted
Posted
I have the same problem there were no way to install leopard on my p5k deluxe

I tried with de brazil mac version and the toh version.

with the toh version I could install in a albatron I845. but I can make it work on my pc

 

 

I Also have this ASUS P5K deluxe, and installed ToH Release on it.

Also applied the EFI patch on it.

 

Just bought me a SATA DVD, wich works for install then.

Could 'nt get it to work on Jmicron

 

Just searching for soms sound drivers now ;)

rawmassen
rawmassen
Posted
  • Author
Posted
Looks like im in the same boat as everyone else, Just searching for audio drivers for the p5k deluxe :)

 

Had those from the start, here you go:

 

http://www.mediafire.com/?7jmyobt4xtx

 

It contains a sub-folder called p5ke, in there you will find drivers for your Deluxe (E and Deluxe have the same components). "AppleAzaliaAudio.kext" is the one you need for audio.

plas
plas
Posted
Posted
Had those from the start, here you go:

 

http://www.mediafire.com/?7jmyobt4xtx

 

It contains a sub-folder called p5ke, in there you will find drivers for your Deluxe (E and Deluxe have the same components). "AppleAzaliaAudio.kext" is the one you need for audio.

 

 

Thanks found those in another topic somewhere.

 

If i could find my linux disk i would attempt to do a codec dump and use the HDA patchers.

Other than that looking pretty good.

rawmassen
rawmassen
Posted
  • Author
Posted
Thanks found those in another topic somewhere.

 

If i could find my linux disk i would attempt to do a codec dump and use the HDA patchers.

Other than that looking pretty good.

 

Which Nvidia drivers are you using currently? I'm wondering whether some perform better than others, but have only tried mac.nubs NVInject (8800 listed as UNKNOWN NVIDIA in system, although has correct RAM).

plas
plas
Posted
Posted

I used NVinject.

Followed this guide. http://forum.insanelymac.com/index.php?showtopic=72493

 

Do you know how to get the system to see the correct amount of Vram. Should be seeing 768mb.

 

G80-450:

 

Chipset Model: G80-450

Type: Display

Bus: PCIe

PCIe Lane Width: x16

VRAM (Total): 256 MB

Vendor: NVIDIA (0x10de)

Device ID: 0x0194

Revision ID: 0x00a2

ROM Revision: NVinject 0.1.5

Displays:

VX922:

Resolution: 1280 x 1024 @ 75 Hz

Depth: 32-bit Color

Core Image: Hardware Accelerated

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Supported

Rotation: Supported

Display Connector:

Status: No display connected

rawmassen
rawmassen
Posted
  • Author
Posted
I used NVinject.

Followed this guide. http://forum.insanelymac.com/index.php?showtopic=72493

 

Do you know how to get the system to see the correct amount of Vram. Should be seeing 768mb.

 

Mac.nub's NVinject installer lets you choose which version you have, it's very easy to install. We have the same monitor - good choice :¬)

antiriad
antiriad
Posted
Posted
Looks like im in the same boat as everyone else, Just searching for audio drivers for the p5k deluxe :)

 

hi dude !! can you give me a piece of advice ?

it seem you have a very similar configuration, what version of leo did you install ?

I try both ToH and Brazil mac, but I just can make it work.

ToH gets kernel panic, I readed over there that the brazil mac have a patch for the p35 chipset but I just can intall the patch no devices found in volumes path

I´m going to try tonight again

plas
plas
Posted
Posted
hi dude !! can you give me a piece of advice ?

it seem you have a very similar configuration, what version of leo did you install ?

I try both ToH and Brazil mac, but I just can make it work.

ToH gets kernel panic, I readed over there that the brazil mac have a patch for the p35 chipset but I just can intall the patch no devices found in volumes path

I´m going to try tonight again

I used a brazilmac disk and installed 10.5, then upgraded to 10.5.1.

 

Used this guide.

http://forum.insanelymac.com/index.php?showtopic=72493

 

Things i remember doing to get this to work.

Disabled jmicron in the bios

Set sata to AHCI in bios

Had to use a USB dvd drive/ or a sata one.

Because the jmicron is disabled, installed to sata harddrive.

Bought a USB keyboard, my ps2 one didnt work when it came to the stage of entering in the user details.

 

As for audio drivers i used the ones further up. Might try and get the applehda ones working tonight, if im successful i will post my codec dump here

antiriad
antiriad
Posted
Posted
I used a brazilmac disk and installed 10.5, then upgraded to 10.5.1.

 

Used this guide.

http://forum.insanelymac.com/index.php?showtopic=72493

 

Things i remember doing to get this to work.

Disabled jmicron in the bios

Set sata to AHCI in bios

Had to use a USB dvd drive/ or a sata one.

Because the jmicron is disabled, installed to sata harddrive.

Bought a USB keyboard, my ps2 one didnt work when it came to the stage of entering in the user details.

 

As for audio drivers i used the ones further up. Might try and get the applehda ones working tonight, if im successful i will post my codec dump here

 

hi! thank you for your quick answer, but I read the guide, and I have 2 more question, if you dont mind.

1.- did you use the Kalyway cd ? what for ? and where do you get it ?

2.- where did you get the pc_efi 5.2 ? I have one patch that came with the file I download. and I allready unzip it on my pendrive.

in fact I have anotherone that have been modified by sameone here in the forum. for p5k3.

 

actually the problem I´m having is that after I install the leopard when you have to run the install program in verbose mode, I get into de /volumes path I don´t have any device.

no hd, no usb, no anything.

so I can install the patch.

I try do it without entering in verbose mode, I meen like making the installation again and entering the terminal from the gui mode. there, I can see every partition of the 4 hd plugged to the pc, and the pendrive Named "PATCHER", as I read overthere in this forum.

but I get a kernel panic

the Tiger instalation natively work perfect.

I´m getting mad

Insalenymad!!

Thank you very much for your cooperation.

rawmassen
rawmassen
Posted
  • Author
Posted
I used a brazilmac disk and installed 10.5, then upgraded to 10.5.1.

 

Used this guide.

http://forum.insanelymac.com/index.php?showtopic=72493

 

Things i remember doing to get this to work.

Disabled jmicron in the bios

Set sata to AHCI in bios

Had to use a USB dvd drive/ or a sata one.

Because the jmicron is disabled, installed to sata harddrive.

Bought a USB keyboard, my ps2 one didnt work when it came to the stage of entering in the user details.

 

As for audio drivers i used the ones further up. Might try and get the applehda ones working tonight, if im successful i will post my codec dump here

 

Good luck with AppleHDA, would be very sweet if you got it working.

plas
plas
Posted
Posted
hi! thank you for your quick answer, but I read the guide, and I have 2 more question, if you dont mind.

1.- did you use the Kalyway cd ? what for ? and where do you get it ?

2.- where did you get the pc_efi 5.2 ? I have one patch that came with the file I download. and I allready unzip it on my pendrive.

in fact I have anotherone that have been modified by sameone here in the forum. for p5k3.

 

actually the problem I´m having is that after I install the leopard when you have to run the install program in verbose mode, I get into de /volumes path I don´t have any device.

no hd, no usb, no anything.

so I can install the patch.

I try do it without entering in verbose mode, I meen like making the installation again and entering the terminal from the gui mode. there, I can see every partition of the 4 hd plugged to the pc, and the pendrive Named "PATCHER", as I read overthere in this forum.

but I get a kernel panic

the Tiger instalation natively work perfect.

I´m getting mad

Insalenymad!!

Thank you very much for your cooperation.

 

 

I used the Kalyway disk to prepare the harddrive. It can be found on PB.

Someone posted the link to pc_efi 5.2 in the guide. I think its a few pages in.

 

Where/ how did you get your brazil disk. I go a copy from bittorrent so it might be different from a patched retail disk.

 

Good luck with AppleHDA, would be very sweet if you got it working.

 

Yeah it didnt work. The devices were found but no sound. I did some digging around and saw that the guy writing the driver had some issues with alc883.

mots
mots
Posted
Posted
As for audio drivers i used the ones further up. Might try and get the applehda ones working tonight, if im successful i will post my codec dump here

 

hi, did you get the sound working with AppleAzaliaAudio.kext from P5K.zip/p5ke/files/ ?

 

that is the last component i need that is yet not working.

 Share
Go to topic listing
×
×
  • Create New...