8F1111 SSE3.SSE3.emulation.No.NXDX.CPUID.Fix.ppf

[JaS]

SSE3.SSE3.emulation.No.NXDX.CPUID.Fix.ppf

 

--------------------------------------------------------------------------------

 

These Patches are for 8f1111

 

This is for sse3 and sse2 users.It is meant to be an all in one dvd iso ppf patcher to get your system up and running (note I didn't say running flawless).

You do not need the java boot loader patches or any patches other then this ppf to get the dvd booting and installing on your system.

 

[Edited: Content in vilotion of DMCA ]

 

The Extensions.mkext has the support you need to get the dvd to boot and install.

 

Here is the after install support that is included

 

ApplePS2Controller (keyboard, mouse, trackpad),

AppleGenericPCATA.kext,

AppleOnboardPCATA.kext (with NForce deviceIDs),

AppleVIAATA.kext (thanks to parch),

AppleAC97Audio.kext (with NForce deviceIDs) and Maxxuss VMWare Sound Driver)

Maxxuss VMWare Network Driver

 

Thanks Maxxuss for the patches and all the hard work.

 

Good Luck and don't flame me if this doesnt work for you.

 

It should also be noted that the sse3 emulation is only used if sse3 is not present in the cpu(so if you have a sse3 cpu the kernel doesnt use the emulation )

Edited February 17, 2006 by Hagar

[bgrau]

Jaz, budd, are these with the new Maxxuss (I bow in reverence) patches?

[JaS]

Yes ... But its JaS not Jaz

[bgrau]

Yes ... But its JaS not Jaz

Sorry dude I am on pills

[scroll1]

thanks JaS for the package.

When I applied it to my DVD it booted to a blue screen.

I looked at the DVD iso again and could not find the /system/library/extensions.mkext file or the extensions folder. should they have been on the DVD 8f1111 iso after applying the ppf?

I'm in the process of re-burning with extensions.mkext added....

[JaS]

thanks JaS for the package.

When I applied it to my DVD it booted to a blue screen.

I looked at the DVD iso again and could not find the /system/library/extensions.mkext file or the extensions folder. should they have been on the DVD 8f1111 iso after applying the ppf?

I'm in the process of re-burning with extensions.mkext added....

 

 

Hmmmm yes they should have .. did you patch the iso before you applied my ppf?

[scroll1]

thanks for the reply,

the iso was not patched before applying your ppf. I have gone back to assembling it on my G5, I had a few issues with ppf-o-matic, but I know how handle that now.

I'll try again from scratch....and patch it on the G5.

[JaS]

yeah I had issues with ppf-o-matic on mac os x it kept closing on me so what I did was click on the ppf file and ppf-o-matic would openwith the ppf patch alread selected,then I could pick the iso and patch it without ppf-o-matic crashing.

 

hope this helps

[scroll1]

yes, that's what had read in the wiki.

27mins now waiting to burn another DVDRW (glad I have these)!

[JaS]

Also simetimes dvd-rws can be the cause of problems ... but dvd-r media for this is a pain.I have burned maybe 40-50 wasted dvd-r's with all the os x builds I've tried

Edited December 7, 2005 by JaS

[chival4ry]

Thanks, JaS ! ^^

 

I am installing the 8f1111 on vmware5.5

( macosx_10.4.3_8f1111_for_dtk_userdvd.iso(original) + your patch & how to install by xtraa ).

 

By the way, there is a error.

( "You need to restart your computer." => after restarting, a small spinning circle down the grey apple )

 

Any good ideas ?

Edited December 7, 2005 by chival4ry

[macgirl]

Did you try -v option at boot?

[chival4ry]

macgirl, thanks ! ^^

 

boot : -v => darwin windows => blue screen (about 15 minutes) => tiger windows

( Refer to two attached images, please. )

 

----------------------------------------------------------------------

 

After 8F1111 SSE3.SSE3.emulation.No.NXDX.CPUID.Fix.ppf, what do we next ?

 

 

[see2 users]

 

1) Removes AppleTPMACPI & AppleFPMemDriver

2) ?

 

[see3 users]

 

1) Removes AppleTPMACPI & AppleFPMemDriver

2) ?

[JaS]

You can remove then sure.I never do as they give me no trouble.

[chival4ry]

OK, I see.

 

 

[summary]

 

after installing => "You need to restart your computer." => restart => a small spinning circle down the grey apple

=> restart => f8 fast(many times)=> boot : -v => darwin windows

=> blue screen with the rainbow circle(about 15 minutes) => tiger windows => type private infos => restart

=> grey apple => blue screen => restart => f8 fast(many times)=> boot : -v => darwin windows

=> tiger windows ^^

Edited December 7, 2005 by chival4ry

[JaS]

OK, I see.

[summary]

 

after installing => "You need to restart your computer." => restart => a small spinning circle down the grey apple

=> restart => f8 fast(many times)=> boot : -v => darwin windows

=> blue screen with the rainbow circle(about 15 minutes) => tiger windows => type private infos => restart

=> grey apple => blue screen => restart => f8 fast(many times)=> boot : -v => darwin windows

=> tiger windows ^^

 

For vmware that might be how it goes yes.I install native

[chival4ry]

I have no dvd-rw, and use a vmware installation by physical hard (xtraa)

 

I want to know contents in your patch.

 

---------------

 

(EDIT: Removed content violating DMCA

Edited February 17, 2006 by Metrogirl

[antrunix]

From excellent work of Maxxus and JaS : splendid on my ASUS M5N laptop Pentium Dothan. The Pic is JaS'

[madmanxwater]

I just got 8F1111 working on my system thanks to JaS. Specs are:

 

HP Pavilion zd8225 Media Center Laptop

3.2Ghz P4 HT 640 w/SSE3, 800Mhz FSB

1Gb Dual 533 Ram

ATI X600 128Mb Radion Mobility Graphics

100Gb HD (One partion Mac OS only)

Dual Layer LightScribe DVD

Firewire, USB 2.0 6-1 card reader

PC Card & PC Express/54

1440x900 Display (haven't got that running yet, still at 1024x768 :-(

 

 

Intalled with 8F1111 dmg converted to ISO then applyed the WesleyPatch 1.1 ppf. Re-formatted the HD then did a clean install without the extra drivers and it works fine. No audio, 1024x768 only withoud CoreImage or QDExtreme , but everything else is ok so far.

 

Can anyone tell me exactly how to get the 1440x900 and Coreimage QDEXtreme working??

 

thanks so much JaS, Maxxuss and Wesley!!

[stryder]

SSE3.SSE3.emulation.No.NXDX.CPUID.Fix.ppf

 

--------------------------------------------------------------------------------

 

These Patches are for 8f1111

 

This is for sse3 and sse2 users.It is meant to be an all in one dvd iso ppf patcher to get your system up and running (note I didn't say running flawless).

You do not need the java boot loader patches or any patches other then this ppf to get the dvd booting and installing on your system.

 

 

It should also be noted that the sse3 emulation is only used if sse3 is not present in the cpu(so if you have a sse3 cpu the kernel doesnt use the emulation )

 

I'm downloading right now. I'll try it out and let you know if these work. So far I haven't been successful with an 8f1111 with my machine, except for the SSE3 emulation.

Edited December 8, 2005 by stryder

[lester]

Currently I have 10.4.1 dual boot with my XP. Can I use 8F1111 dmg + the patch above burn into dvd and install without affect my windows XP? will it format the whole harddisk or can i install to th existing mac partition?

[Braveheart]

It will depend on where on the drive you have XP and osx 86, If osX is on the beginning of your drive its cool, Otherwise you will run into problems.

[stryder]

I'm downloading right now. I'll try it out and let you know if these work. So far I haven't been successful with an 8f1111 with my machine, except for the SSE3 emulation.

 

Wow! It works! I'm typing this in 8f1111 right now!

 

Question for you JaS... how can I verify which kernel it is using? (ie: SSE3, SSE3 emulation, etc.?)

 

Thanks for all your hard work! (And especially a thanks to Maxxuss, without whom we wouldn't even have these patches!)

[lester]

It will depend on where on the drive you have XP and osx 86, If osX is on the beginning of your drive its cool, Otherwise you will run into problems.

 

no, xp is my 1st partiton, so what is the problem if I install osx86 to he 3rd partition?

[berggrendottk]

I'm having problem with my mouse and keyboard.

 

Converted *.dmg to *.iso and patched with ppf, installed nativly, everything works fine exept my mouse and keyboard doesn't work either in PS2 or USB ( I have a logitec cordeless deluxe wich can be run in both using an usb to ps2 adapter). The Keyboard worked fine in 10.4.1 .. and oh, I formatted the osx drive before installing so no upgrade.

 

system specs;

 

P4 prescott 3,2 ghz

Abit IC7 mobo chipset 875P

dual boot with xp and osx in different partitions on a sata drive..

 

after a lot of reboots my mouse worked in PS2 and I was just about to select wich language my keybord was when it all freezed, can have something to do with that i pressed a key on my keybord, thats when i frooze up, after reboot it didn't work again..

 

Problems with appleps2controller.kext? any idea what I should do?

 

[edit: happened to reply to microsoftbob, this should go in the original thread. Mbob; it shore does work, just remember to select erase and install instead of upgrade, and don't forget to change the boot order afterwards and replace the chain0 file if you use that method]