phreakazoidz Posted March 13, 2007 Share Posted March 13, 2007 Anyone have try with NVIDIA® nForce 590-SLI Chipset??? TIA Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/ Share on other sites More sharing options...
fry Posted April 11, 2007 Share Posted April 11, 2007 Anyone have try with NVIDIA® nForce 590-SLI Chipset??? TIA Yes, i have the m2n32 deluxe and work, does not work the lan and the audio, im triyin to get it work Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-344858 Share on other sites More sharing options...
Gipo Posted April 12, 2007 Share Posted April 12, 2007 Audio works with Azalia kext.. don't work lan and sata to me... Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-345769 Share on other sites More sharing options...
fry Posted April 13, 2007 Share Posted April 13, 2007 Audio works with Azalia kext.. don't work lan and sata to me... Sata work but the 3132, the back or the external port only. in the m2n32 ow i can hear with azalia! Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-346452 Share on other sites More sharing options...
Max_Berlin Posted July 12, 2008 Share Posted July 12, 2008 Yes, i have the m2n32 deluxe and work, does not work the lan and the audio, im triyin to get it work Azalia does work on it for the sound - it does even surround - is not a sound blaster .. but well. I have kext for the SATA and PATA, it doesen't work really good. There is some work about the right parameters, the point is, there are many nforce 5 .... Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-816379 Share on other sites More sharing options...
WhiteMonster Posted September 18, 2008 Share Posted September 18, 2008 I have a P5N32-SLI Premium board with a 590 Chipset... everything works, audio, video and SATA... I used the 10.5.2 Kalyway DVD... even the onboard WIFI works... if you're board is the wifi_edition just use the RTL8187L_AP Driver found on the DVD... Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-896529 Share on other sites More sharing options...
jediknight1138 Posted September 23, 2008 Share Posted September 23, 2008 Anyone have try with NVIDIA® nForce 590-SLI Chipset??? TIA mmju, here !! im using the evga-nforce 590 motherboard, its with an amd athlon x2 6000+ processor, dual sli xfx 8600gt video cards and 2gb ocz ddr2 ram. but im trying to install the 10.5.2 and no luck, the install just frezze right to select the languaje, no keyboard and no mouse work. im using usb key and ps2 mouse, if i make the switch to key+mouse ps2...the same, no luck, anyone advice, pleasE? Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-902004 Share on other sites More sharing options...
WhiteMonster Posted September 23, 2008 Share Posted September 23, 2008 mmju, here !!im using the evga-nforce 590 motherboard, its with an amd athlon x2 6000+ processor, dual sli xfx 8600gt video cards and 2gb ocz ddr2 ram. but im trying to install the 10.5.2 and no luck, the install just frezze right to select the languaje, no keyboard and no mouse work. im using usb key and ps2 mouse, if i make the switch to key+mouse ps2...the same, no luck, anyone advice, pleasE? I had the same issue with my Mouse/Keyboard freezing up, then my comp freezes and i'm forced to restart... Here's what I did step by step and everything works 100%... What you'll need... Aitkos v4i DVD, Mysticus C*'s Combo 10.5.5 Update, MeDevil's Nforce SATA Kext (AppleNForceATA.kext.zip) and OSX86Tools (also, Realtek's 8187L AP WLAN UTILITY for those w/ WIFI Edition Board) ** Also, make sure you're using an IDE DVD Drive to install this or you might get the "waiting on root device" error! First, boot up from the DVD and Press F8 at the Darwin Boot Prompt. Once at the prompt, type "toh -v" (without quotes) (give it about 2-5 mins for the setup to open) Once setup opens, go into the DISK Utility and format your disk with a MBR partition, then continue... before hitting install, hit CUSTOMIZE in the bottom left! Select the TOH Kernel, Select the SATA and NFORCE SATA from the drivers section and leave everything else the way it is. (DO NOT select any audio/video drivers yet as you'll select those in the Combo Update Post Patch) Once it's installed... open up OSX86Tools and make a backup of the kernel. Back up the TOH_9.2.0 Kernel that's currently installed! You'll need this later! Then do the Mysticus C*s 10.5.5 Combo Update, make sure you select the TOH_Sleep Kernel, the usb2.0fix and any audio/video drivers you need (pick one of the regular NVinject ones, I choose the NVinject 256MB one for my 8600GT Card (atleast I did that because the GFX ones for NForce Boards didn't work for me, at all... causes lines throughout the screen)) Once everything is installed go ahead and restart your computer... If you have my motherboard and you used the ADI1988B Installer from the mysticus update, go ahead and find it in your application folder and run it... this will give you full audio, including SPDIF, MIC and regular speakers. If you didn't install it from the update, you can find it in the forums. Now open up OSX86Tools and restore the kernel you had backed up before... (This will take you from TOH_Sleep 9.2.0 to the regular TOH 9.2.0.) For some reason the TOH_Sleep one causes random freezes after using computer for an hour or so... Restart computer Now open up OSX86Tools AGAIN and now install the MedEvil NForce_SATA Driver AppleNForceATA.kext.zip Restart Computer When it boots up, open up OSX86Tools again and run everything on the top part (repair extension permission, update program caches, etc.etc.. just check every box up there and run it... (should take about 5-10 mins)... Restart computer again and that's it... welcome to Leopard 10.5.5 with working audio/video and no more random freezes... Finally, for those of you that have my EXACT board and you have the WIFI edition like me.... go to realtek's website and download the Realtek 8187L AP WLAN Utility... Install it... reboot computer and you'll have onboard working WIFI! I've been using it for about 2 days now using photoshop, dreamweaver, poser 7 and even final cut studio 2... over and over again to see how much it can take and it works fine... no random freezes anymore. I've tried almost all other kernels with no success... i've tried the following with my board: (so you don't waste your time) StageXNU, TOH_Sleep_9.2.0(works but with random freezes), Vanilla, modbin, kabyl, Stock & Nforce Kernels (works with random freezes also)... To date the best kernel I found for my Board is the regular TOH 9.2.0 Also, I don't let my computer sleep... first thing I do is go to power options, uncheck the hard drives sleeping box and choose NEVER to sleep the computer... I just set my screen saver to 15 mins and that's it... Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-902101 Share on other sites More sharing options...
jediknight1138 Posted September 24, 2008 Share Posted September 24, 2008 thanks! but no luck...the thing is, the dvd boot right ok, but it just frezze at the point to select languaje...no keyboard and no mouse work :S since i cant pass thru...cant do anything more, i read somewhere...i have to tweak some at the BIOS...any suggestions ? Link to comment https://www.insanelymac.com/forum/topic/45126-anyone-have-try-with-nvidia%C2%AE-nforce-590-sli-chipset/#findComment-903429 Share on other sites More sharing options...
Recommended Posts