van Posted November 5, 2005 Share Posted November 5, 2005 Hi all, I tried to install deadmoo img. I was helped with this tutorial And I have this startup screen What can i do?? Please Link to comment Share on other sites More sharing options...
pc_guru Posted November 5, 2005 Share Posted November 5, 2005 Try to use -v parameter on booting and after type the messages here, maybe you could to get some useful output. Link to comment Share on other sites More sharing options...
van Posted November 5, 2005 Author Share Posted November 5, 2005 I booted with -v paarameter and it turn around that (repeat always). USBF: 136.168 Apple USBOHCI[0xc1d4c000]Found a transaction which hasn't moved in 5seconds on bus3, timing out ! It will keep retryingStill waiting for root device It change number and repeat it infinitely Link to comment Share on other sites More sharing options...
pc_guru Posted November 5, 2005 Share Posted November 5, 2005 I booted with -v paarameter and it turn around that (repeat always).It change number and repeat it infinitely Have you an USB device connected when booting ?. If the answer is yes, then please unplug it. If still the trouble persist then disable USB ports in SETUP (hit del key when your PC is getting on). Try it and after tell me. Good Luck !! . Link to comment Share on other sites More sharing options...
van Posted November 5, 2005 Author Share Posted November 5, 2005 I have a external HDD donnected with usb but it turned off when i booted. I'm going to rety it Link to comment Share on other sites More sharing options...
van Posted November 5, 2005 Author Share Posted November 5, 2005 I tried but i discovered other problems with the precedent.. Start OHCI controler will be unloaded across sleep UIM Initialize could not got chip to come out of reset within 100ms UIM Initialize errors occured and after that it affiched the precedent lines thanks for your help P.S. connected USB: i have my external HDD, a microphone, my mouse. Do i disconnected all of that? Link to comment Share on other sites More sharing options...
pc_guru Posted November 5, 2005 Share Posted November 5, 2005 ...P.S. connected USB: i have my external HDD, a microphone, my mouse. Do i disconnected all of that? Hmmmm, USB mouse aren't supported yet, until where i know, do you have some ps2 mouse ?, if you have it, then plug it this one and unplug the USB, also microphone and HD. If you get in osx86, then try to restart connecting the microphone if all is ok, then try with HD too. This is a trial an error process. Best Luck !!. Link to comment Share on other sites More sharing options...
van Posted November 5, 2005 Author Share Posted November 5, 2005 I tried with all USB device disconneted and my usb mouse on a ps2's adaptater. I have always identic problems with a new: The IOUSBF Family is having trouble enumerating a usb device has been plugged in. It will keep retrying I don't understrand the problem, I'm a french speacker. Thanks Link to comment Share on other sites More sharing options...
EtherealRemnant Posted November 5, 2005 Share Posted November 5, 2005 Disable USB in BIOS. Link to comment Share on other sites More sharing options...
pc_guru Posted November 6, 2005 Share Posted November 6, 2005 Disable USB in BIOS. I said him that, but seems that him didn't understand it. Link to comment Share on other sites More sharing options...
van Posted November 6, 2005 Author Share Posted November 6, 2005 Ok i didn't understand it, but now, i just tried with USB disable in BIOS. Now i have only three error messages: Firewire OHCI Vendor ID1106ID3044 PCI Now Active, GUID 000...; maxspeed s400.ERROR: Firewire (OHCI) Vendor ID 1106 ID 3044PCI: handleUnrecoverableErrorInt. Still waiting for root device I looked for disable firewire in BIOS but i didn't found it. I don't hava something connected with firewire on PC. What's can i do? Thanks for your answers Link to comment Share on other sites More sharing options...
VaiOSX Posted November 6, 2005 Share Posted November 6, 2005 Firewire OHCI Vendor ID1106ID3044 PCI Now Active, GUID 000...; maxspeed s400.ERROR: Firewire (OHCI) Vendor ID 1106 ID 3044PCI: handleUnrecoverableErrorInt. Still waiting for root device This means, you still have something plugged in conflict : your PCI Firewire card. try to start with one of these 2 options : platform=ACPI platform=X86PC If it doesn't help, Remove your FW PCI card. you'll be able to plug it back later. Let's make it simplified : Unplug everything on your computer except the keyboard, the mouse, the monitor/display and the power supply. Something important to care about is : Every MoBo has it's own specs for the PCI ports. Your system is waiting for a bootable device on the firewire port, because your PCI card is plugged in a port who has a higher priority than your SATA controller chip. In your BIOS check also if the firewire is detected in "boot device" sequence list, disable it. The "Hardware controlled by OS"'s like feature in the BIOS must be disabled. The last solution if the above mentioned are not helping, is to start with -x (safe mode). Bonne Chance. Link to comment Share on other sites More sharing options...
PatS Posted November 7, 2005 Share Posted November 7, 2005 About the whole USB mouse thing... I have a USB mouse, and things work fine.... It's a microsoft basic digital something or other... And I use a PS/2 keyboard, but that doesn't really matter... Anyways, I just thought I would say that... Link to comment Share on other sites More sharing options...
Recommended Posts