deeveedee Posted January 3 Share Posted January 3 @Baio77 grazie mille. What are you recommending? brumas2025 has been posting Hackintool screenshots to show the connectors that are active. Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845837 Share on other sites More sharing options...
Baio77 Posted January 4 Share Posted January 4 (edited) I analyzed the attached EFI, and I think it's more correct to use desktop id since the flags and index have the same values in the patch. I'm attaching a screenshot of the patch for you to test. If you try this patch, try logging in. To use AAPL,ig-platform-id Desktop you need to add the spoof device-id. As you can see below, this way you avoid adding unnecessary patches. Force Online might fix random black screens on startup. I3 9100 https://www.intel.com/content/www/us/en/products/sku/134870/intel-core-i39100-processor-6m-cache-up-to-4-20-ghz/specifications.html Edited January 4 by Baio77 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845840 Share on other sites More sharing options...
deeveedee Posted January 4 Share Posted January 4 (edited) @Baio77 Your suggestion may work. Acidanthera says here that CPUs with device-id 0x3e91 should be "spoofed" as device-id 0x3e92. See my post here where I recommended that brumas2025 try device-id 0x3e92. device-id 0x3e92 is a Desktop ID (same as i5-9600). brumas2025 tested framebuffer platform-id 0x3e9b0007. it worked for him after we modified the busIDs. See here. It appears that once the busIDs are properly patched, both mobile and desktop framebuffers can be used. Note that he started this thread with framebuffer platform ID 0x3e9b0007 when only a single display was working. That's why we tried other framebuffer Platform IDs. Now that we have more test results, it appears that as long as the busIDs are patched, he can use mobile and desktop framebuffers. See his test results here. Edited January 4 by deeveedee 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845841 Share on other sites More sharing options...
Baio77 Posted January 4 Share Posted January 4 What you say is obvious, the patch always overwrites the native data. If the patch includes busid index flags etc etc everything works, device id or platform ig no longer count for anything. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845842 Share on other sites More sharing options...
deeveedee Posted January 4 Share Posted January 4 (edited) @Baio77 I'm not sure what you're trying to say, but I trust you know what you're talking about. I have a feeling there is more than one right answer. EDIT: I think you're saying that with ig-platform-id 0x3e9b0007, we don't need to patch the indices and flags because the framebuffer already defines them. If that's what you're saying, then yes, we already know that. Review the EFIs posted earlier in this thread. Edited January 4 by deeveedee 2 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845843 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 9 hours ago, deeveedee said: EDIT2: @Asural I'm not confident that the problem has anything to do with ACPI patching (I doubt it). I think the fact that displays "worked" after new ACPI patches were included in the EFI was just a timing glitch. Don't give up on the ACPI patches, since they'll only improve his hack, but I'd continue to think about settings / configuration that would affect display initiation timing. @brumas2025 In your BIOS, do you have an option for "Fast Boot" or something similar? If so, please make sure that this setting is "Disabled" in BIOS. I removed the arguments as you advised, but nothing has changed... Quote Quote Quote Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845846 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 37 minutes ago, brumas2025 said: I removed the arguments as you advised, but nothing has changed... Regarding BIOS LegasyUSBSaport = Disable XHCI Hand-off = Enable PCI Expless Nateve Controll = Enable The following are power saving settings, so I think it's fine to disable them. PCIE APSM Suport PCH PCIE APSM Suport DMI APSM Suport PCH DMI APSM Suport I think the kext requires USBMap.kext, so I'm writing down how to create it. Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845847 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 @brumas2025. (It won't @ convert...) Download USBMap-tahoe-test.zip and create USBMap.kext for Tahoe. Creating the Original USBMap.kext 1. Launch Terminal and drag and drop USBMap.command into the terminal to execute it. 2. Select D. Discover Ports to begin selecting the USB port to use. 3. Insert a USB device (a mouse or gamepad will do) into the USB port you want to use on the H310. The port will become enabled and change color. 4. When the screen refreshes, the next USB will become discoverable, so continue to detect all USB devices. 5. When all are complete, exit the detection screen with Q. 6. Return to the menu screen; select the Edit & Create USBMap.kext menu with P. 7. Select A. Select All, then select K. Build USBMap.kext. USBMap.kext will be created in the Results folder. 8. Exit all menus with Q to exit USBMap.command. The created USBMap.kext is for Sequioa only, so it needs to be converted for Thaoe. Creating USBMap.kext for Tahoe 1. Drag and drop USBMapInjectorEdit.command into Terminal to execute it. 2. When prompted, drag and drop USBMap.kext into Terminal to execute it. 3. The menu screen will change, so select S to execute it. 4. The menu screen will change, so select C to execute it. 5. Creation is complete at this point, so select Q for all commands to exit USBMapInjectorEdit.command. Add the created USBMap.kext to EFI, enable it in config.plist and check USB operation. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845849 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 (edited) I think @Baio77 and @deeveedee would like to test with device-id = <923E0000> and <913E0000>. Please modify the device-id in the attached PciRoot(0x0)/Pci(0x2,0x0) file and test it. The HackinTool display seems suspicious because it doesn't reflect the settings... From the Patch menu bar, check Apply Current Patches, and click Goto Current in the Platform ID: drop-down menu before taking a screenshot. ADD: In my index3 display, BusID and pipe show 0x6 and 8 no matter what values I set. Asural_test_1.plist Edited January 4 by Asural 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845853 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 3 hours ago, Asural said: @brumas2025. (It won't @ convert...) Add the created USBMap.kext to EFI, enable it in config.plist and check USB operation. I'll try to do this, but it doesn't apply to graphics... Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845854 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 (edited) 31 minutes ago, brumas2025 said: I'll try to do this, but it doesn't apply to graphics... This is done to ensure port isolation, as the USB port is also used for data communication. In other words, USB communication does not interfere with the screen display. In my case, without this I can't use the keyboard and mouse and Bluetooth gives me a warning. Edited January 4 by Asural 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845857 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 4 hours ago, Asural said: Regarding BIOS I changed the settings in the BIOS, booted with the configuration you suggested, black bars, and after twitching the monitor's power supply, the image returned to normal. Quote Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845859 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 4 hours ago, Asural said: @brumas2025. (It won't @ convert...) Add the created USBMap.kext to EFI, enable it in config.plist and check USB operation. Quote USBMap.kext.zip Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845860 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 7 minutes ago, brumas2025 said: USBMap.kext.zip 1.94 kB · 0 downloads Please attach the ioreg file after enabling USBMap.kext. Also, please test this post. I think setting the device-id may be necessary. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845861 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 4 minutes ago, Asural said: Please attach the ioreg file after enabling USBMap.kext. Also, please test this post. I think it may be necessary to set the device ID. - I don't understand what to test in this post.... iMac 040126.ioreg Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845863 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 16 minutes ago, brumas2025 said: Also, please test this post. I think it may be necessary to set the device ID. - I don't understand what to test in this post.... iMac 040126.ioreg 4.83 MB · 1 download I checked USBMap.kext and ioleg, and it seems that only USB 2.0 is enabled. I'll try again later, but in its current state, I don't think it will be recognized even if connected via USB 3.0. This is sufficient for testing the screen, so let's test the display in this state. @Baio77 and @deeveedee think that explicitly setting the device-id will "calibrate iGP using WEG." In other words, this might work. The attached configuration may instruct you to change some parameters, but I think it's fine to try anything and see if it works. 50 minutes ago, brumas2025 said: I changed the settings in the BIOS, booted with the configuration you suggested, black bars, and after twitching the monitor's power supply, the image returned to normal. Please narrow the HackinTool window width to make the text larger. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845865 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 7 minutes ago, Asural said: I checked USBMap.kext and ioleg, and it seems that only USB 2.0 is enabled. I'll try again later, but in its current state, I don't think it will be recognized even if connected via USB 3.0. Please narrow the HackinTool window width to make the text larger. during the removal of ioreg, I did not have usb 3 devices connected. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845866 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 (edited) 17 minutes ago, brumas2025 said: during the removal of ioreg, I did not have usb 3 devices connected. When you insert a USB 2.0 port, USB 3.0 should be enabled automatically as well. Since a maximum of 15 ports are assigned to USB 2.0 only, I assume you are not using the auto-detection function. Well, for now, let's perform a display test in this state. ADD: A genius is someone who can follow simple instructions and do something easily. Everyone makes mistakes, so don't worry about it and just move on. Edited January 4 by Asural 1 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845867 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 (edited) 43 minutes ago, Asural said: Well, for now, let's perform a display test in this state. I tried with the configurations that hackintool created, but again the black bars that go away when I turn off the NDMI display. Quote config006.plist iMac 040126-1.ioreg Edited January 4 by brumas2025 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845868 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 (edited) 23 minutes ago, brumas2025 said: I tried with the configurations that hackintool created, but again the black bars that go away when I turn off the NDMI display. config006.plist 1.71 kB · 0 downloads iMac 040126-1.ioreg 4.83 MB · 0 downloads In HackinTool's display, the BusID and Type are displayed differently for <923E0000> and <913E0000>. Please attach the ioreg for <923E0000> and <913E0000>, clearly indicating which is which. I think I'll get some feedback from @Baio77 and @deeveedee later, including my settings. ADD： If you performed the test using the settings in config006.plist, please test using the contents of Asural_test_1.plist. This is because additional modifications to boot-arg are also included. Edited January 4 by Asural 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845869 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 (edited) 20 minutes ago, Asural said: In HackinTool's display, the BusID and Type are displayed differently for <923E0000> and <913E0000>. Please attach the ioreg for <923E0000> and <913E0000>, clearly indicating which is which. I think I'll get some feedback from @Baio77 and @deeveedee later, including my settings. loaded from <913E0000> . the display has not changed... And the previous pictures were when it was <923E0000> Quote iMac 040126<913E0000> .ioreg Edited January 4 by brumas2025 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845872 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 (edited) 21 minutes ago, brumas2025 said: loaded from <913E0000> . the display has not changed... And the previous pictures were when it was <923E0000> iMac 040126<913E0000> .ioreg 4.83 MB · 0 downloads Sorry, IORegistryExplorer has been updated to Version 3.0.2 (14). Please use Version 3.0.2 for Tahoe because the settings are stored differently. Edited January 4 by Asural 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845873 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 (edited) 14 minutes ago, Asural said: Sorry, IORegistryExplorer has been updated to Version 3.0.2 (14). Please use Version 3.0.2 for Tahoe because the settings are stored differently. <913E0000> iMac v3.0.2.ioreg.zip Edited January 4 by brumas2025 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845874 Share on other sites More sharing options...
Asural Posted January 4 Share Posted January 4 19 minutes ago, brumas2025 said: <913E0000> iMac v3.0.2.ioreg.zip 3.56 MB · 0 downloads Please also attach the test results for <923E0000>. I'm probably going to bed now. 1 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845875 Share on other sites More sharing options...
brumas2025 Posted January 4 Author Share Posted January 4 (edited) 13 минут назад Асурал сказал: Please also attach the test results for <923E0000>. I'm probably going to bed now. <923E0000>. Goodnight! Расценки iMac 040126<923E0000> .ioreg.zip Edited January 4 by brumas2025 Quote Link to comment https://www.insanelymac.com/forum/topic/362102-asrock-h310m-hdv-dual-monitor-problems/page/5/#findComment-2845876 Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.