Sonoma on Ivy Bridge with HD4000 laptop

[ivak4eto]

Hello, all!

I have a Fujitsu-Siemens Lifebook P702 with i3-3110m and HD4000. So far I've been able to get every MacOS from Mavericks to Monterey on it. But I stumbled upon Ventura and up. Since the CPU is Ivy bridge I put Cryptexfixup.kext with no luck. I also played with booter and kernel quirks with no success. I tested FakeSMC - didn't help. I build SSDTs with ssdttime, also no joy. csr-active-config is 03080000. AAPL,ig-platform-id is 03006601. USBs are mapped. SMBIOS is spoof'd to MacBookPro15,2. I followed Dortania guide step by step. Kexts and OC is updated to latest.

I really don't know what am I missing. Maybe something is wrong with the motherboard, since audio is working only with VoodooHDA and not AppleALC.

Whatever I do, I get the same panic.

Please, help!

 

Edited September 1, 2024 by ivak4eto

[Slice]

You did not mention OCLP. Are you use it? if not then you have no chance.

[ivak4eto]

Hey Slice!  Thank you for your reply!

 

I have only been using OCLP only for patching the HD 4000.

I'm not sure how to use OCLP for booting. I would need some directions, please!

Or maybe you can direct someone that you know using Ivy Bridge with HD 4000 to help me out.

 

Thanks in advance!

Edited September 3, 2024 by ivak4eto

[LockDown]

try using the latest AMFIPass

[ivak4eto]

Hey LockDown!

 

I tried latest AMFIpass (1.4.1) with Cryptexfixup, but it didn't work.

Edited September 3, 2024 by ivak4eto

[LoBlanc]

Hi. I must say it never worked so well.
1) create your Sonoma installer. Select a supported machine under Sonoma as System Product name.
2) Boot arguments: alcid=3 -wegnoegpu -lilubetaall amfi=0x80. The alcid value depends on your chip.
3) Thus, no need of AMFIpass.

Good luck

Edited September 3, 2024 by LoBlanc

[ivak4eto]

Hello LoBlanc! Thank you for your reply!

I tried with SMBIOS MacBookPro15,2 which is supported by Sonoma...but it didn't do the magic.

 

Also, I'd like to mention couple of things. I was unable to get audio with AppleALC, so I switched to VoodooHDA - therefore alcid will most likely be unusable. As well as -wegnoegpu, since I don't have dGPU on this laptop.

Lastly, I agree that newer MacOS won't run fine on this machine, but since many people were able to boot Ventura+ on Ivy with HD4000, I also wanted to give it a shot.

 

Like someone said - "Hackintoshing is worst than cigarettes addiction!" Lol 😁

Edited September 3, 2024 by ivak4eto

[Slice]

@ivak4eto

Why not use BigSur?

[ivak4eto]

20 hours ago, Slice said:

@ivak4eto

Why not use BigSur?

Hi Slice!

I could. I am actually using Catalina on it, but I wanted to boot Ventura/Sonoma just for kicks.

[t..]

On 9/3/2024 at 4:52 AM, ivak4eto said:

Hey Slice!  Thank you for your reply!

 

I have only been using OCLP only for patching the HD 4000.

I'm not sure how to use OCLP for booting. I would need some directions, please!

Or maybe you can direct someone that you know using Ivy Bridge with HD 4000 to help me out.

 

Thanks in advance!

Did you try adding the patches of OCLP manually to your config.plist? there is guides online but the one i was using was sandybridge.

[王尼玛]

我也是同样配置，我的安装策略是驱动更新到最新，我用的是clover引导，OC也可以，都要最新，最主要的是在安装时候，把config.plst，里面的显卡设置为AAPL.ig-platform-id 12345678，就是先不要注入显卡信息，就可以正常安装，安装完后，再打OCLP，然后在驱动AAPL,ig-platform-id is 03006601

[ivak4eto]

On 6/1/2025 at 1:44 PM, t.. said:

Did you try adding the patches of OCLP manually to your config.plist? there is guides online but the one i was using was sandybridge.

Hello! Thanks for the reply!

Could you direct me to that guide, please?

Thank you!

 

On 6/5/2025 at 6:11 AM, 王尼玛 said:

我也是同样配置，我的安装策略是驱动更新到最新，我用的是clover引导，OC也可以，都要最新，最主要的是在安装时候，把config.plst，里面的显卡设置为AAPL.ig-platform-id 12345678，就是先不要注入显卡信息，就可以正常安装，安装完后，再打OCLP，然后在驱动AAPL,ig-platform-id is 03006601

 

Thanks, man! I'll try that trick with 12345678, too! :)