Jump to content

Natit/Titan on 10.4.8 with GeForce 6600: Display-B: Not usable!


Slingky
 Share

13 posts in this topic

Recommended Posts

Hi guys!

 

please help me.

 

I'm running MacOS 10.4.8 with kernel 8.8.1

 

I have a GeForce 6600 and i tried both Titan and Natit

 

both give me NVDA,Display-A: not usable or NVDA,Display-B: not usable

 

i also tried both outputs on my graphic card.

 

 

there is my device details from profiler:

NVIDIA GeForce 6600:

 

Chipset Model: NVIDIA GeForce 6600

Type: Display

Bus: PCIe

VRAM (Total): 256 MB

Vendor: NVIDIA (0x10de)

Device ID: 0x0141

Revision ID: 0x00a2

Displays:

Display:

Resolution: 1024 x 768

Depth: 32-bit Color

Core Image: Not Supported

Main Display: Yes

Mirror: Off

Online: Yes

Quartz Extreme: Not Supported

Display:

 

 

And there is dmesg:

Titan: By omni, built November 4, 2006

Titan: Testing for NVidia card...

Titan: Found NVIDIA GeForce 6600

Titan: All set, cross your fingers!

skgeosx: Ethernet address 00:13:d4:ea:e3:99

skgeosx: Enabled!

skgeosx: setMulticastMode on

skgeosx: setMulticastMode off

NVDA,Display-B: Not usable

 

 

Thanks in advance.

Edited by Slingky
Link to comment
Share on other sites

No.

 

Try the version of Natit posted in the this thread: http://forum.insanelymac.com/index.php?showtopic=32536

 

Make sure you follow the instructions on how to install it.

 

I tried to download that zip file, and a couple of other like it over the past couple of days. Despite being logged in I keep getting an error like :

 

Sorry, but you do not have permission to use this feature. If you are not logged in, you may do so using the form below if available.

 

Is there another site where we can download natit packages?

Link to comment
Share on other sites

I just posted another copy in this thread: http://forum.insanelymac.com/index.php?showtopic=35677

 

Try it.

 

Out of interest do you have a copy of dual 0.1 as well? 0.2 seems to initialise the second display but system profiler claims nothing is connected.

 

I've got a 6800 (0x00c1) with a VGA and a DVI connector. VGA display fires up just fine, but the DVI is the one that claims not to be connected.

 

Cheers.

Link to comment
Share on other sites

i tried natit dual 0.02. same thing. NVDA,Display-B: not usable

 

i tried switching my monitor to the other output on video card...i started to have problems... hangs at boot in ide controllers...

 

I have an Nforce4 board. it's Asus A8NSLI Premium...

 

I'm not able to start Macos on any video card output...

 

Think i will have to reinstall...

 

Do you have ideas ?

Link to comment
Share on other sites

i tried switching my monitor to the other output on video card...i started to have problems... hangs at boot in ide controllers...

 

I have an Nforce4 board. it's Asus A8NSLI Premium...

 

This is starting to sound like a motherboard compatibility problem.

 

You can still try v0.01.

Link to comment
Share on other sites

sorry, for hang problem... i didn't had to reinstall.

i boot install dvd, then use disk utility to check/repair permissions and check/repair disk

 

i reboot and it was working again

 

 

i also tried natit dual 0.01

same thing

 

do i have to remove IONDRVSupport.kext ????

 

 

i put here the dmesg:

 

display: family specific matching fails

Natit: Starting.

Natit: Setting device_type=NVDA,Parent

Natit: Setting @1,device_type=display

Natit: Setting @0,compatible=NVDA,NVMac

Natit: Setting @1,compatible=NVDA,NVMac

Natit: Setting @0,fboffset=0x00020000

Natit: Setting @1,name=NVDA,Display-B

Natit: Setting @0,name=NVDA,Display-A

Natit: Setting NVCAP=<data not shown>

Natit: Setting @0,device_type=display

Natit: Setting model=GeForce 6600

 

NVDA,Display-A: Not usable

Link to comment
Share on other sites

do i have to remove IONDRVSupport.kext ????

 

No, and you should be working with a clean install of 10.4.8 too.

 

You might have to try finding some other hardware to test with in order to isolate the problem. It sounds like it could be your motherboard (my bet) or your video card.

Link to comment
Share on other sites

thanks bofors,

 

 

i finally reinstall macos from scratch and use natit dual 0.02

it worked the 1st time.

 

 

only one problem, my screen colors seem to be less vivid !

 

maybe it's my eyes...

 

now, winxp in parallels is a lot faster even in fullscreen.

 

thanks you very much.

Link to comment
Share on other sites

 Share

×
×
  • Create New...