Mastachief Posted May 18 Share Posted May 18 There is no igplatform for ice lake with 4 connectors, it's 3 or 5, there are a few with dummy connectors, so if I ignore some dummy connectors (the ones with an index of -1 in the port column in hackintools patch section on under the connector page) maybe I will find one with 4? Link to comment Share on other sites More sharing options...
jalavoui Posted May 20 Share Posted May 20 (edited) this lilu fix from github might be important https://github.com/acidanthera/Lilu/commit/a7fc69b7cc3ebb08ed72c41e873ae7c5f2451731 here's the binarys from github build i'm using this lilu debug version for building nblue/whatevergreen Lilu-1.6.8-DEBUG.zipLilu-1.6.8-RELEASE.zip use the debug release only if you using xcode to build binarys use the lilu release in the /EFI/Kexts folder to update lilu this are the new binarys of nblue/whatevergreen bulid for new lilu WhateverGreen.kext.zipWhateverGreen-master.zipNootedBlue.kext.zipNootedBlue-master.zip Edited May 20 by jalavoui Link to comment Share on other sites More sharing options...
Mastachief Posted May 22 Share Posted May 22 (edited) The Whenvergreen works fine, I'll test nblue next week with a 13.6.5 installer, the boot log will be written to the EFI flags, so hopefully I can debug from that. Why was the Vendor ID changed in this area? aside from not wanting to break someones display.... I really wanna try nblue on Sonoma, but I'm waiting for Sonoma Patches. 🥹 Edited May 24 by Mastachief Link to comment Share on other sites More sharing options...
jkbuha Posted May 22 Share Posted May 22 On 5/20/2024 at 10:15 PM, jalavoui said: this lilu fix from github might be important https://github.com/acidanthera/Lilu/commit/a7fc69b7cc3ebb08ed72c41e873ae7c5f2451731 here's the binarys from github build i'm using this lilu debug version for building nblue/whatevergreen Lilu-1.6.8-DEBUG.zip 230.64 kB · 2 downloads Lilu-1.6.8-RELEASE.zip 67.15 kB · 10 downloads use the debug release only if you using xcode to build binarys use the lilu release in the /EFI/Kexts folder to update lilu this are the new binarys of nblue/whatevergreen bulid for new lilu WhateverGreen.kext.zip 281.47 kB · 13 downloads WhateverGreen-master.zip 1.91 MB · 3 downloads NootedBlue.kext.zip 30.25 kB · 16 downloads NootedBlue-master.zip 366.54 kB · 6 downloads Have had better results with both kexts now. Screen goes black (attempting second boot) but still crashes (ie: can't ssh/vnc into it) using various device-ids. Mysteriously, still no crash debugs, and no mention of ICLL in logs. Is there any failsafe device-id that this should work with, or do the framebuffer-conX fields need to be correct? It's likely this XPS 9520 has a eDP display, not LVDS... Link to comment Share on other sites More sharing options...
benmacfreak Posted May 24 Share Posted May 24 On 5/22/2024 at 2:43 PM, jkbuha said: Have had better results with both kexts now. Screen goes black (attempting second boot) but still crashes (ie: can't ssh/vnc into it) using various device-ids. Mysteriously, still no crash debugs, and no mention of ICLL in logs. Is there any failsafe device-id that this should work with, or do the framebuffer-conX fields need to be correct? It's likely this XPS 9520 has a eDP display, not LVDS... i did add the new kexts to my efi, tested ventura and sonoma, e.g. 13.6.5 and newer, same issue here too. Link to comment Share on other sites More sharing options...
Mastachief Posted May 30 Share Posted May 30 On 3/16/2024 at 9:39 AM, shl628 said: I get the same kernel panic whether I apply -allow3d or not. Are you using MacBookPro16,2 or MacBookAir9,1 ? Link to comment Share on other sites More sharing options...
shl628 Posted May 30 Author Share Posted May 30 43 minutes ago, Mastachief said: Are you using MacBookPro16,2 or MacBookAir9,1 ? I'm using MacBook Pro 16,2 model. Link to comment Share on other sites More sharing options...
Mastachief Posted May 30 Share Posted May 30 (edited) On 5/30/2024 at 10:08 AM, shl628 said: I'm using MacBook Pro 16,2 model. Since you are on 13.6.5, use MacBookAir 9,1, the 16:9 resolution ratio and settings under that smbios is closer to our actual laptop displays resolution 1920 x 1080. You will also access be able to use the correct scaled resolutions in System Preferences > Displays, these resolutions are usually dictated by your edid as it has the resolutions in the edid or scaling info MacbookPro16,2 uses the 16:10 ratio which comes with other settings as well. you can always use the display apple ID Injection property in nblue paried with used fixedid on your edid.bin to generate the properties you need to add in nblues info.plist Edited 19 hours ago by Mastachief resolution info added Link to comment Share on other sites More sharing options...
Mastachief Posted June 8 Share Posted June 8 Does anyone here use Dual Channel memory? I am asking the 9A4X users. Link to comment Share on other sites More sharing options...
Recommended Posts