Jump to content
Pedro Diniz

ioconsoleusers gioscreenlockstate 3 after install high sierra nvidia webdrivers

3 posts in this topic

Recommended Posts

Hello Friends, how are ya?

Could you help me with a problem?

I followed some guides like: https://www.insanelymac.com/forum/topic ... coffeelake -dsdt /

and the installation of high Sierra 10.13.6 (17G8030) and nvidia webdrivers (correspondent to OS version) went smoothly, the problem starts when I try to boot the GPU.

Hardware:
MOBO: Aorus B360M gaming 3 (rev.1)
CPU: i5 8400
GPU: GTX 1060 OC Galax redblack

BIOS:
Fast boot - disabled
windows 8/10 features - other os
lan pxe - disabled
storage boot option - UEFI
other pci devices - UEFI
 
Initial display output - PCie 1 slot
Intel's Platform Trust Technology (PTT) - disabled
sata mode selection - AHCI
XHCI hand off - enabled
VT-d - disabled
internal graphics - auto


The problem is:
I can log into the system normally without using my nvidia GPU but when I boot the system with the flags for webdrivers to work I fall into the login screen but it keeps flashing, I can see the mouse and I can move it but the screen flashes and the following error appears when the screen goes "black": IOConsoleUsers: gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0. I searched for this error on the internet and tried to solve but to no avail so far.

If someone can help me I would be extremely grateful! thanks in advance!

Clover file attached.

CLOVER.zip

Share this post


Link to post
Share on other sites
Advertisement
Posted (edited)

Your graphics are not initialising. In your Clover config, you've setup Inject Intel + a layout-id. You probably want to remove that and only call on the nVidia Web Driver. Your SMBIOS setup was also slightly incorrect.

 

Try this revised instead. Copy it to your Clover EFI folder and name it config_test or something like similar and call it manually from Clover's main menu->options->config

config.plist.zip

Edited by Hervé

Share this post


Link to post
Share on other sites
Posted (edited)
On 8/16/2019 at 2:40 PM, Hervé said:

Your graphics are not initialising. In your Clover config, you've setup Inject Intel + a layout-id. You probably want to remove that and only call on the nVidia Web Driver. Your SMBIOS setup was also slightly incorrect.

 

Try this revised instead. Copy it to your Clover EFI folder and name it config_test or something like similar and call it manually from Clover's main menu->options->config

config.plist.zip

Thx for reply man, I have tried with your plist but no success.

can u take a look on my efi folder now?

can u recommend bios configs?

 

 

EFI.zip

Edited by Pedro Diniz

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By benmills1
      Hi, i can someone help me with installing mac OS Mojave on my HP ENVY - 15-as102na?
      I have an imac to use for setting up my usb & installing MacOS Mojave.There are various kext files etc that i'm not sure about and need some help as some are hardware specific.
      I tried previously but got stuck on an apple logo and couldn't get past that, and tried today and had problems with Clover.
      Once i get mac os on my 128gb m.2 ssd ( which i'll upgrade to either a 256gb or 512gb depending on how well this hackintosh works)
      I have a free 2.5" inch hdd bay where i'd like to install windows on in the future.
      I think i may have to replace my wireless card ( based on a few google results) which i'm fine with as long as i can see it working without just so i know i won't waste money
      Specs:
      Cpu: i5 7200u
      GPU: HD 620
      8GB ram
      Wifi card- Intel Wireless 7265 ( Intel® 802.11ac (2x2) )
      Motherboard - HP 81D2 & BIOS version is f.56
      https://support.hp.com/gb-en/document/c05311862
      Thanks
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/forum/download/file.php?id=25033
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By AudioGod
      I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me.
      This is also a thread to discuss everything Z390 Pro and try and help where we can and maybe make things a little better for you. 
       
      A huge massive thank you to @glasgood @MaLd0n @larabee These three guys have helped me and talked me so much and are as helpful as you could ever get, Without them I wouldn't have a perfect working build like I do or be putting up this Guide & Discussion Thread sharing the hard work and countless hours that we have all put in to this.   
       
       
      This EFI and Patched DSDT have been created to work with a Gigabyte Aorus Z390 Pro, 9900k with a Vega 56 but has also been tested and verified fully working with the following Hardware
       
      CPU's
      8700k, 9600k, 9700k, 9900k
       
      GPU's
      RX 560, 570, 580, 590, Vega 56, Vega 64, Radion VII
      (If you have success with any different CPU or GPU's then please do let me know)
       
       
      There Is No Better Guide Then The One That @glasgood Has Already Written So Just Follow He's Guide For a Perfect Install.     
       
       
      HARDWARE USED
      • Intel I9 9900k 
      • Gigabyte AORUS Z390 PRO
      • Sapphire Nitro+ SE Vega56 ( connected to monitor with DisplayPort )
      • Corsair Vengeance Pro RGB 16GB @3200mhz (2 x 8GB)
      • Corsair RM850x 80 Plus Gold Power Supply Unit
      • Coolermaster MASTERLIQUID ML360R RGB CPU Cooler
      • Samsung 970 EVO 1TB NVMe SSD macOS Mojave
      • Samsung 860 EVO 1TB SSD (2.5) Windows 10 Pro
      • ABWB BCM943602CS 802.11AC WI-FI With Bluetooth 4.0 PCI-Express (PCI-E)   
      • Lian Li PC-O11DW Dynamic ATX Case
       

       

       
       
      WORKING
      • Sound 
      • Ethernet Port
      • WiFi
      • SSD Trim
      • USB 3.0 & 2.0 (All ports Open Natively)
      • AirDrop
      • iCloud
      • Hardware Acceleration
      • iMessages
      • Facetime
      • Sleep & Wake
      • Sleep and Shutdown via the Power Button
      • Handoff
      • Netflix on Safari browser
      • Continuity
       
       
      CLOVER  FOLDER
      Use this folder with fully patched DSDT
      Z390 Pro DSDT EFI.zip   (Updated 21 July 2019)
       
       
      ADDITIONAL DSDT's  (A big thanks to @MaLd0n for compiling these extra DSDT's)
      If your using a Vega 56/64 or Radion VII then use this DSDT (already installed in my EFI)
      DSDT.VEGA.VII.zip
      If your using a RX Series or Nvidia GPU then use this DSDT
      DSDT.RXxxx.NVIDIA.zip
       
       
      To Create Your Own Patched DSDT Message @MaLd0n using the link bellow
      https://olarila.com/forum/viewtopic.php?f=19&t=1131 
      (If you want a perfect setup then getting your own patched DSDT made would be the best thing to do, Mine will work perfectly fine but different hardware no matter how small a change it is can tend to have some sort of effect on the DSDT and your setup)
       
       
      If Your Not Using File Vault Then Please Disable Hibernate
      disablehibernate.command
       
       
      ADDITONAL DOWNLOADS
      Clover
      Clover Configurator
      Kext Updater
       
       
      OPTIONAL DOWNLOADS
      AirportBrcmFixup.kext    (If your Wifi Card isn't working after installing my EFI then add the AirportBrcmFixup.kext to your clover kext folder and reboot)
      FakeSMC    (Can be used instead of VirtualSMC)
      Hackintool
      IORegistryExplorer
      Native Display Brightness with MonitorControl
       
       
      BIOS SETTINGS (Bios Revision F10)
       
      • Enter BIOS → Press F12 → Enter Setup
      • Save & Exit → Load Optimized Defaults
       
      • BIOS → Windows 8/10 Features → Other OS
      • BIOS → CSM Support → Enabled  (Can be set to disabled depending on what GPU you use)
       
      • MIT → Advanced Memory Settings  → Extreme Memory Profile (X.M.P) → Enabled  
       
      • Peripherals → Initial Display Output → PCIe 1 Slot
      • Peripherals → Trusted Computing → Security Device Support →  Disable
      • Peripherals → Intel(R)Bios Guard → Intel BIOS Guard Support →  Disable
      • Peripherals → USB Configuration → Legacy USB Support →  Enabled
      • Peripherals → USB Configuration → XHCI Hand-off →  Enabled
      • Peripherals → Network Stack Configuration → Network Stack →  Disabled
      • Peripherals → SATA And RST Configuration → SATA Mode Selection →  AHCI
       
      • Chipset → Vt-d → Enabled  (can be enabled or disabled, your choice)
      • Chipset → Internal Graphics → Disabled
      • Chipset → Audio Controller → Enabled
      • Chipset → Above 4G Decoding → Disabled 
       
      • Power → Platform Power Management → Enabled
      • Power → ErP → Enabled  (can be enabled or disabled, your choice)
      • Power → RC6 (Render Standby) → Disabled
       
      • Save & Exit → Save & Exit Setup
       
       
      SCREENSHOTS
       

       

       

       

       

       

       

       

       

       

       

       

    • By ludufre
      Installing macOS Mojave 10.14.6 on Gigabyte Z370N WIFI + i7 8700K + UHD 630



      Changelog:
       
      09/01/2019 15:57h GMT-0
      - Updated to 10.14.6.
       
      06/10/2019 00:44h GMT-0
      - Completely rewritten.
       
      10/17/2018 08:12h GMT-0
      - Fix Kexts permissions commands adjusted.
      - Removed FrameBuffer patch that is not needed.
      - Added audio solution and HDMI.
      - Unfortunately DisplayPort does not work.
      - Replaced Wifi/BT with DW1560 (BCM94352Z)
       
      10/11/2018 04:15h GMT-0
      - Added USB 3.0 patch.
      - Adjusted some steps.
      - Changed text formatting.
       
      10/11/2018 03:42h GMT-0
      - Added missing UEFI configuration.
       
      10/07/2018 00:36h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i7-8700K ->  Work. All SpeedStep stages.
      - Video Card: Intel UHD 630 ->  Work. QE/CI and Metal.
      - Chipset: Intel Z370 ->  Work.
      - HDMI 2.0 (1st) ->  Work.
      - HDMI (2nd) ->  Work.
      - DP ->  Not tested yet.
      - Audio: ALC1220 ->  Work.
      - HDMI Audio ->  Work.
      - WiFi/Bluetooth ->  Not work. Replaced with BCM94360CS2.
      - Ethernet (1st) ->  Work.
      - Ethernet (2nd) ->  Work.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Todo
       
      - Make audio work.
      - Make HDMI audio work.
      - Test DisplayPort.
      - Make second ethernet work.
      - Replace Wifi/Bluetooth.
      - Test DP.
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover Configurator
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes. / 8 minutes with USB 3.0
       
       

      Install bootloader

      Download the CloverEFI (used 5058, from Automated Clover Builds) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - Recommended drivers (check all)
      - UEFI Drivers - Human Interface Devices (check all)
      - UEFI Drivers - FileVault 2 UEFI Drivers (check all, If you are going to use FileVault)
      - UEFI Drivers - Additional drivers - NvmExpressDxe (if you are going to use NVMe)


       
       
      Make things works
       
      We'll make a full working flash drive, so follow these instructions:
       
      Will be mounted the EFI partition of the flash drive.
       
      Open the the /Volumes/EFI/CLOVER/config.plist inside this new partition with Clover Configurator (used 5.5.0.0)
       
      Important modifications
       
      config.plist
       
      ACPI Page
       
      - Check: SSDT - PluginType
       
      BOOT Page
       
      - Add: Arguments - darkwake=2
      - Check: Legacy - XMPDetection=Yes
       
      KERNEL AND KEXT PATCHES Page
       
      - Check: KernelPm
       
      RT VARIABLES Page
       
      - Change: CsrActiveConfig - 0x3E7
       
      SMBIOS Page
       
      - Change: Macmini8,1 - Mac mini (Late 2018) | Intel Core i7-8700B @ 3.20 GHz

       
      - Click: Generate New (few times in the two buttons)

       
       
      Need some Kexts in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext, ITEIT87x.kext and IntelCPUMonitor.kext inside of DMG version r240.
      - Download the Lilu.kext from here. I used the version 1.3.8.

       
      Intel UHD 630
       
      ACPI Page
      - Uncheck: Fixes - AddHDMI
      - Uncheck: Fixes - FixDisplay
      - Uncheck: Fixes - FixHDA
       
      GUI Page
      - Change: Screen Resolution - 3840x2160 (My monitor is 4K)

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the WhateverGreen.kext from here. I used the version 1.3.1.

       
      Audio ALC 1220 and HDMI audio

      BOOT Page
      - Add: Arguments - alcid=11

      DEVICES Page
      - Change: Audio - Inject - 11
      - Uncheck: Audio - AFGLowPowerState
      - Uncheck: Audio - ResetHDA

      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the AppleALC.kext from here. I used the version 1.4.0.

       
      All USBs (2.0, 3.0, Type-C, internal)
       
      KERNEL AND KEXT PATCHES Page - KextsToPatch
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 1 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.iokit.IOUSBHostFamily
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 2 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FB0F0F
      - Replace* [HEX]: 83FB3F0F
      - Comment: USB Port Limit Patch 3 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      - Name*: com.apple.driver.usb.AppleUSBXHCI
      - Find* [HEX]: 83FF0F0F
      - Replace* [HEX]: 83FF3F0F
      - Comment: USB Port Limit Patch 4 PMHeart/DalianSky
      - MatchOS: 10.14.x
       
      Need a Kext in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
       
      Need SSDT patch in the folder /EFI/CLOVER/ACPI/patched/
       
      - Download the SSDT-EC.aml, SSDT-UIAC.aml and SSDT-USBX attached bellow.
       
      Wifi and Bluetooth (BCM94360CS)
       
      Works out of box (plug 'n' play).
       
       
      LAN Cards
       
      Need a Kext for feach card in the folder /EFI/CLOVER/kexts/Other/
       
      - Download the IntelMausiEthrenet.kext from here. I used the version 2018-1031.
      - Download the SmallTreeIntel82576.kext attached bellow. I do not remember where I found it.

       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      - Shutdown and insert the flash.
      - Power on with DEL pressed to enter BIOS setup.
      - Change value: Periphelrals - Initial Display to IGP
      - Change value: Periphelrals - USB Configuration - XHCI Hand-off to ENABLE
      - Change value: Chipset - VT-d to DISABLE
      - Change value: Chipset - Internal Graphics to ENABLE
      - Change value: Chipset - DVMT Pre-Allocated to 128M
      - Save & Exit Setup
       
      - Now, hold the F12
      - In the list, select your flash drive.
      - It will show twice. One with UEFI prefix and another without.
      - Select with UEFI prefix. Ie.: "UEFI: Sandisk Cruzer"
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "HD".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/10.14/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.6
       
      - Download and open latest CloverConfigurator
      - Open Mount EFI and click in Mount Partition in EFI Partitions list
      - Click in Open Partition that appears
      - Go to EFI -> CLOVER
      - Backup config.plist and ACPI folder to desktop
      - Go back and delete CLOVER folder
      (If you restart now you can't boot in macOS - DON'T RESTART)
      - Download latest Clover and install (link and config above)
      - Replace config.plist and ACPI folder from your desktop
       
      - Update Lilu.kext, AppleALC.kext, WhateverGreen.kext, HWSensors kexts (FakeSMC, ACPIMonitor, IntelCPUMonitor, ITEIT87x) in /Library/Extensions/
      - Run:
       
      sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i /  
       
      - Install macOS Update 10.14.6 and restart
       

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas and all others members involved directly or indirectly.
       
       
       
      Z370N-WIFI v2.zip
×