Jump to content
About Just Joined group Read more... ×
eliot6001

is my lan device supported?

2 posts in this topic

Recommended Posts

I don't know whether my LAN device will work on MAC and Which version of mac but i still want to run MAC on my PC, Also i checked my CPU-GPU and it turned out that i can Run MAX High sierra but i realized that some people have trouble with Sound and Internet connection so Here's the NAME of my LAN device:
 

PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05\4&45F2A70&0&00E1 as (LAN DEVICE took the name from device manager in  windows). 

also from compatibleIds i got this:
PCI\VEN_10EC&DEV_8136&REV_05
 
Is it Supported on any version of macOS ?

Edited by eliot6001

Share this post


Link to post
Share on other sites
Advertisement

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By MaLd0n
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
        1 -Create a USB bootable
       
      Create your usb installer, use this tool and download Catalina or Big Sur from Apple servers
       
      Catalina
      installScript_allfullapp.zip
       
      Big Sur
      installScript_1016fullapp.zip
       
      Credits: crazybirdy
       
      Copy Catalina / Big Sur installer to Applications folder, open terminal and run
       
      Catalina
       
       
      Big Sur
       
       
      If you want check one step by step, check here
       
      -Opencore Vanilla Tutorial
      https://tinyurl.com/ycvcnp8h
       
      2- EFI folder USB installation
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/y6avuxsv
       
       
      3- EFI folder SSD
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD 
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD
      https://tinyurl.com/y6avuxsv
       
      4- Start Fine Tune
       
      Run this app and post full dump here for full ACPI solution
       
      RunMe.app
      https://tinyurl.com/y9562hz7
       
       
      If you like a SSDT way, here we go
      SSDT-OLARILA.aml.zip
       
      5- USB Solution
      USB INTEL SERIE 400.zip
       
      Use these kexts, enable XHCI port limit patch and follow this tutorial for remap USB ports
       
       
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU  
      --SCREENSHOTS--































      -If you want to buy me a beer - Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

      We're all here to have fun and learn from each other!
    • By y010204025
      Update: On October 24, 2020, using clover to solve the macOS11 beta10 boot problem, you can now enjoy macOS11beta10, and the compatibility of subsequent versions is not guaranteed.
      HIDPI uses a modified version. You can directly execute the hidpi script to get a better experience. If you lose the repair, it is not within the scope of my support.
      Support upgrades without destroying the integrity of the original image.
      There seems to be a problem with the shortcut keys. If you can help solve it, thank you for your contribution.
       
      Perhaps it was the first NEC (Lenovo) Lavie Z HZ550 to install hackintosh. I hope more people who like Lavie Z series can experience Hackintosh at HZ550. She is really great.
       
      I found HZ550 & HZ750 on the Chinese website, which is amazing. It weighs only 790g, 13.3 inches, and the standard 2k screen, which is too attractive to me. I am a Hackintosh enthusiast. I think HZ550 or HZ750 with MacOS is the best Unfortunately, the Lavie Z series is not listed in China, only exists in the Japanese and American markets, and in the Japanese market is the NEC brand, while the American market uses the Lenovo logo.
       
      Fortunately, I got an HZ550 from Taobao. Yes, not HZ750. In comparison, HZ750 has more touch screens and 360 ° flip. These are hard to attract me. More importantly, HZ750 is about 200g heavier than HZ550 That's why I chose HZ550. Well, because he is only 2,000 RMB.
       
      The specific introduction can refer to NEC Japan official website:http://nec-lavie.jp/products/hz13b/
       
      The HZ550 hardware list I obtained:
                                    
                       -/+:.          ningnan@ningnandeMacBook-Air
                      :++++.          OS: 64bit Mac OS X 10.15.5 19F96
                     /+++/.           Kernel: x86_64 Darwin 19.5.0
             .:-::- .+/:-``.::-       Uptime: 19m
          .:/++++++/::::/++++++/:`    Packages: 1
        .:///////////////////////:`   Shell: zsh 5.7.1
        ////////////////////////`     Resolution: 3840x2160
       -+++++++++++++++++++++++`      DE: Aqua
       /++++++++++++++++++++++/       WM: Quartz Compositor
       /sssssssssssssssssssssss.      WM Theme: Blue (Dark)
       :ssssssssssssssssssssssss-     Disk: 11G / 108G (12%)
        osssssssssssssssssssssssso/`  CPU: Intel Core i7-5500U @ 2.40GHz
        `syyyyyyyyyyyyyyyyyyyyyyyy+`  GPU: Intel Iris Graphics 6100
         `ossssssssssssssssssssss/    RAM: 4376MiB / 8192MiB
           :ooooooooooooooooooo+.    
            `:+oo+/:-..-:/+o+/-     
       
       
      Advantages: small size, light weight, 2K screen, 8G memory, 512g SSD, keyboard feels good, and wireless network card can be replaced, which is unimaginable in today's thin and light books.
      Disadvantages: The sound is small, almost the same as the mosquitoes.
       
      Ok, bragging is over!
      In order to use the wireless network, I changed the wireless network card from inter 7265 to BCM94352ZAE. Some people called it DW1560. It is uncomfortable that in China, this card and his elder brother DW1830 were hyped to a high price of 480RMB. of. Fortunately, I bought it early, and this card is also very stable under win10, and there is no high delay and outage. The hard disk should be PM951 of Samsung, not PM981, which is lucky.   Before installing Hackintosh: You need to prepare a 16G U disk, SanDisk is not a rough choice for making MacOS installation disk, I used the latest MacOS Catalina 10.15.5, got config.plist from Rehabman, and put together an EFI, the latest version of clover and kext drivers. Thanks to Rehabman and the developers of the Black Apple community. I do n’t like that OC team very much.
      Make an installation disk: If you have a computer running MacOS, you can use the command line to make it, if you do n’t have a computer running MacOS, you can try VMware, I know that the insanelymac forum allows discussion, or use ether to write the image to U disk, use the EFI I provided to boot into the installation process.   BIOS setting: Press F12 at boot to enter the BIOS settings, Tab switches to "Security-Secure boot", set to "DISable", this is what we need, and switch to "Boot -Boot devices", set the U disk as the first boot item You can directly enter the clover guide interface, please follow it for google it.
      It is worth noting that the remaining space of your EFI partition needs to be greater than 200M, otherwise, the disk format will be wrong. In addition, the format partition format is APFS, do not choose to encrypt, your data is not valuable, at least you must have this awareness of Hackintosh, the file safe is also the same, do not enable, do not use to find your mac, otherwise, change the machine, OK .   Fortunately, no additional ssdt patch is required. All the patch functions are implemented through clover. The flat Apple is turned on. This is to solve the problem of the flower screen. You can find a solution yourself.
      Experience your black apple, this will bring a better experience than MacBook Pro.  
       
    • By gengik84
      First beta... build 20A4299v 
       
      Useful information:
      macOSDeveloperBetaAccessUtility.dmg.zip OpenCore is now able to boot the installer and pre-existing installed macOS 11 Big Sur macOS Big Sur beta 8 build (20A5374i)  New! VMware alternative topic installScript_1016fullapp
    • By chris1111
      Here my theme of OC 

      How to create are own Theme with Icnspack-Builder
       

       
      You can Download the themes with ➤ Themes Downloader
      You can also have the themes on ➤ Github
      You can also have the themes on ➤ HTML Page
       
    • By Mieze
      A New Driver for Realtek RTL8111
       
      Due to the lack of an OS X driver that makes use of the advanced features of the Realtek RTL81111/8168 series I started a new project with the aim to create a state of the art driver that gets the most out of those NICs which can be found on virtually any cheap board on the market today. Based on Realtek's Linux driver (version 8.035.0) I have written a driver that is optimized for performance while making efficient use of system resources and keeping the CPU usage down under heavy load.

      Key Features of the Driver
      Supports Realtek RTL8111/8168 B/C/D/E/F/G/H found on recent boards. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload under IPv4. Support for TCP/IPv6 and UDP/IPv6 checksum offload. Fully optimized for Mountain Lion (64bit architecture) but should work with Lion too. As of now there is no support for Snow Leopard but it can be added if someone will create the necessary patches. Supports Wake on LAN. Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.  
      Limitations
      As checksum offload doesn't work with jumbo frames they are unsupported up to version 2.3.x. Version 2.4.0 might come with experimental jumbo frame support depending on test results of the development versions. No support for 32bit kernels.  
      Installation
      You might want to install the driver to /L/E as usual but it's also ok to use Clover's injection function (installation in the EFI folder). Use your favorite kext installation tool for installation or perform the installation manually (for Clover or OC injection). It's your call! Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      The same procedure should be applied when you are experiencing erratic behavior after an update! Please keep in mind that you have to disable SIP temporarily when you are using OC.
       
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be found in /var/log/system.log. For Sierra and above use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any other Realtek kext from your system because they could prevent the driver from working properly. Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.  
      FAQ
      I want to disable Energy Efficient Ethernet (EEE) but I don't know how? Select a medium without EEE manually. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Current status
      The driver has been successfully tested under 10.8.x and 10.9 with the B, C, D, E, F, G and H versions of the RTL8111/8168 and is known to work stable on these devices.  
      Changelog
      Version 2.4.0d4 (2020-10-10) Experimental jumbo frame support up to 9k for chipset 16 and above Requires 10.14 or newer. Version 2.3.0 (2020-08-14) Reworked medium section and EEE support to resolve problems with connection establishment and stability. Added option to supply a fallback MAC. Updated Linux sources to 8.047.04 and added support for new family members Requires 10.14 or newer.
      Version 2.2.2 (2018-01-21) Force ASPM state to disabled/enabled according to the config parameter setting. Requires 10.12 or newer. Version 2.2.1 (2016-03-12): Updated underlying linux sources from Realtek to 8.041.00. Added support for RTL8111H. Implemented Apple’s polled receive driver model (RXPOLL). Requires 10.11 or newer. Support for older versions of OS X has been dropped. Version 2.0.0 (2015-06-21): Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ. Please note that 2.0.0 is identical to 2.0.0d2. Only the version number has changed. Version 1.2.3 (2014-08-23): Reworked TSO4 and added support for TSO6. Version 1.2.2 (2014-08-44): Added an option to disable Active State Power Management (ASPM, default disabled) as ASPM seems to result in unstable operation of some chipsets. Resolved a problem with Link Aggregation after reboot. Added a workaround for the multicast filter bug of chipset 17 (RTL8111F) which prevented Bonjour from working properly Version 1.2.0 (2014-04-24): Updated underlying linux sources from Realtek to 8.037.00. Improved interrupt mitigate to use a less aggressive value for 10/100 MBit connections. Version 1.1.3 (2013-11-29): Improved transmit queue handling made it possible to reduce CPU load during packet transmission. Improved deadlock detection logic in order to avoid false positives due to lost interrupts. Version 1.1.2 (2013-08-03): Improved SMB performance in certain configurations. Faster browsing of large shares. Version 1.1.0 (2013-06-08): Support for TCP/IPv6 and UDP/IPv6 checksum offload added (can be disabled in Info.plist). Maximum size of the scatter-gather-list has been increased from 24 to 40 segments to resolve performance issues with TSO4 when offloading large packets which are highly fragmented. TSO4 can be disabled in Info.plist without rebuild. Statistics gathering has been improved to deliver more detailed information (resource shortages, transmitter resets, transmitter interrupt count). The interrupt mitigate settings has been changed to improve performance with SMB and to reduce CPU load. Configuration option added to allow for user defined interrupt mitigate settings without rebuild. Version 1.0.4 (2013-05-04): Moved setLinkStatus(kIONetworkLinkValid) from start() to enable(). Cleaned up getDescCommand(). Version 1.0.3 (2013-04-25): The issue after a reboot from Windows has been eliminated. Version 1.0.2 (2013-04-22): Added support for rx checksum offload of TCP and UDP over IPv6. Version 1.0.1 (2013-03-31): Improved behavior when rx checksum offload isn't working properly. Adds the chipset's model name to IORegistry so that it will show up in System Profiler.  
      Known Issues
      There are still performance problems with regard to SMB in certain configurations. My tests indicate that Apple's Broadcom driver shows the same behavior with those configurations. Obviously it's a more general problem that is not limited to my driver. WoL does not work in certain configurations. Old systems with 3 and 4 series chipsets exhibit performance issues in recent versions of macOS because there is no optimized power management for these systems in macOS anymore as Apple dropped support for the underlying hardware a long time ago. In case you are affected, please upgrade your hardware or find an alternative solution because I have no plans for a workaround. Sorry, but I don't think that it's worth the effort.  
      Getting the driver
      The source code can be found here: https://github.com/M...driver_for_OS_X There is also a pre-build binary for Mavericks and above: https://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/  
      Building from Source
      I'm always using the latest version of XCode for development. You can get a free copy of XCode after becoming a member of the Apple developer program. The free membership is sufficient in order to get access to development tools and documentation.
×