Can't connect to ANY VPN.

[GremekHombre]

Hey.

I got kinda weird issue. While I trying connect into VPN (I tried NordVPN, TweakNews, ExpressVPN, ProtonVPN). I got this error:

Which means "The VPN server did not respond."

It Can't be fault of my network because on Windows and Android works just fine. I also have turned off firewall.

There is my config:

https://mega.nz/#!MORmCQyT!VvnJo4e17QHPITOcwdIJdu_OnPGBMTUkgZKlvc1tThw

My OS version: 10.14.5 18F132 (also doesn't work on older builds)

My WiFi card: AR9285

ifconfig dump:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP>
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
	nd6 options=201<PERFORMNUD,DAD>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
XHC20: flags=0<> mtu 0
EHC29: flags=0<> mtu 0
EHC26: flags=0<> mtu 0
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	options=3<RXCSUM,TXCSUM>
	ether 00:00:00:00:00:00 
	inet6 fe80::d5:fa29:7a35:c5bb%en0 prefixlen 64 secured scopeid 0x7 
	inet 169.254.103.2 netmask 0xffff0000 broadcast 169.254.255.255
	nd6 options=201<PERFORMNUD,DAD>
	media: autoselect (<unknown type>)
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 // My WiFi card.
	ether 00:24:2c:34:39:62 
	inet6 fe80::1cf5:bed3:785b:534d%en1 prefixlen 64 secured scopeid 0x8 
	inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
	nd6 options=201<PERFORMNUD,DAD>
	media: autoselect
	status: active
p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
	ether 02:24:2c:34:39:62 
	media: autoselect
	status: active
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000
	inet6 fe80::1e81:21af:8615:90dc%utun0 prefixlen 64 scopeid 0xa 
	nd6 options=201<PERFORMNUD,DAD>

 

Any ideas? Thanks for help

 

[Guest millusions]

może próbuje eh0,

nie bardzo rozumiem dla czego en0 twój ma IP

 

tutaj tak wygląda, ja jestem na en1 WiFi

en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
    ether 10:dd:b1:f2:e3:22
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect (none)
    status: inactive
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether c8:e0:eb:26:e1:1f
    inet6 fe80::807:3230:5e72:94dc%en1 prefixlen 64 secured scopeid 0x6
    inet 10.1.1.79 netmask 0xffffff00 broadcast 10.1.1.255
    nd6 options=201<PERFORMNUD,DAD>
    media: autoselect
    status: active
en2: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 32:00:19:fd:20:00
    media: autoselect <full-duplex>
    status: inactive
en3: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
    options=60<TSO4,TSO6>
    ether 32:00:19:fd:20:01
    media: autoselect <full-duplex>
    status: inactive

 

[GremekHombre]

@millusions

Również nie mam pojęcia, modem GSM mam wyłączony w biosie, zaś pod ethernet nie jestem nawet podpięty, tylko WiFi.
 

There is lspci log:

https://pastebin.com/gwn6cweS

 

[Guest millusions]

no, więc może jest option w vpn config która karta?

 

jak jest ETH0/ETH1 wyłączony w bios to są problemy z icloud, nie pamiętam co dokładnie ale zawsze włączam od parę lat (thats just my experience).

 

jak to by było tutaj to bym wszystkie włączył i delete /Library/Preferences/SystemConfiguration folder to robi network reset.

 

podejrzewam że VPN używa twój ETH0 bo Ethernet ma priority