GremekHombre

Remember that Breaking License =/= Breaking Law (not in every country).

@millusions Również nie mam pojęcia, modem GSM mam wyłączony w biosie, zaś pod ethernet nie jestem nawet podpięty, tylko WiFi. There is lspci log: https://pastebin.com/gwn6cweS

Hey. I got kinda weird issue. While I trying connect into VPN (I tried NordVPN, TweakNews, ExpressVPN, ProtonVPN). I got this error: Which means "The VPN server did not respond." It Can't be fault of my network because on Windows and Android works just fine. I also have turned off firewall. There is my config: https://mega.nz/#!MORmCQyT!VvnJo4e17QHPITOcwdIJdu_OnPGBMTUkgZKlvc1tThw My OS version: 10.14.5 18F132 (also doesn't work on older builds) My WiFi card: AR9285 ifconfig dump: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=201<PERFORMNUD,DAD> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 XHC20: flags=0<> mtu 0 EHC29: flags=0<> mtu 0 EHC26: flags=0<> mtu 0 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:00:00:00:00:00 inet6 fe80::d5:fa29:7a35:c5bb%en0 prefixlen 64 secured scopeid 0x7 inet 169.254.103.2 netmask 0xffff0000 broadcast 169.254.255.255 nd6 options=201<PERFORMNUD,DAD> media: autoselect (<unknown type>) en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 // My WiFi card. ether 00:24:2c:34:39:62 inet6 fe80::1cf5:bed3:785b:534d%en1 prefixlen 64 secured scopeid 0x8 inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 nd6 options=201<PERFORMNUD,DAD> media: autoselect status: active p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 02:24:2c:34:39:62 media: autoselect status: active utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000 inet6 fe80::1e81:21af:8615:90dc%utun0 prefixlen 64 scopeid 0xa nd6 options=201<PERFORMNUD,DAD> Any ideas? Thanks for help

Did anyone get to work AR9285 with Catalina? Seems to AirPortAtheros40.kext from High Sierra doesn't work.

Kext from your link works fine, but I had to change the zfinger string value from 30 to 10 - now it works like a charm VoodooPS2Controller.kext.zip

This is the same kext that Herve upload in post #2: / But here is a problem. This kext was only available on OSXLatitude.com, on this forum I can't find this kext.

It doesn't help before format I used ALPS kext by Mr.Hurt release 5 and it worked great.

Unfortunately using this kext my touchpad doesn't work, only left and right click works, cursor don't move My kext folder: Edit: It seems to work, but I have to press hard on the touchpad to move mouse. Any ideas to change sensitivity of touchpad?

Hey. I need a ALPS kext for my e5430, someone can upload it for me? Thanks

https://www.x-kom.pl/p/288210-karta-graficzna-nvidia-gigabyte-geforce-gt710-1024mb-64bit-low-profile.html or https://www.x-kom.pl/p/288213-karta-graficzna-nvidia-gigabyte-geforce-gt710-2048mb-64bit-low-profile.html(now unavailable, just find these card in other market)

In your budget is hardly to find a new Radeon GPU, only second hand. GT710/730 will works too with FCPX and Motion 5, but performance will... okay, just okay. Here you can see that GT710 works on High Sierra

GT710 and GT730 should works just wine on High Sierra, but i think that Radeon is better option (if u work in FCPX/Motion 5).

I know. Insanelymac is too much better than HaMac forum. When I had a problem with my G72, on HaMac anyone won't help me. While here I got a help after few minutes (Thanks for @Herve).

Hi. Enjoy your time on the forum! PS: I'm from Poland too.

The same problem xD