Jump to content

Zotac GTX 1060 6gb AMP! Edition Not able to boot my OS X 10.12.6 after installing web drivers


chan29ster
 Share

22 posts in this topic

Recommended Posts

Hello 

 

My Config is

 

Intel core i5 9400f
Gigabyte z390 aorus Pro Wifi Motherboard (with latest BIOS version F9a)
8gb x 2 Corsair Vengeance Ram 3000 Mhz
Zotac GTX 1060 Amp! Edition 6gb (Dual Fan)
1 TB Baracuda Hard Disk
Corsair Spec Delta Atc Cabinet
TP-Link w832n USB Wifi Dongle for wifi 

 

macOS Sierra 10.12.6 (16G29)

 

I am able to get onboard audio, bluetooth, ethernet and all USB ports working.

 

But as I install Nvidia web drivers and input boot flag "nada_drv=1" my screen gets stuck at 

 

IOConsoleUsers : time(0) 0->0, Lin 0, lik 1

IOConsoleUsers : gIOScreenLockState 3, hs 0, bs 0, now 0, sm 0x0

 

Please help me 

 

 

Thanks

Link to comment
Share on other sites

I assume you meant nvda_drv=1 (not nada_drv=1 :)) which is basically what you get for setting/activating nVidia Web Driver in CC does. But please post a copy of your Clover config so that we can check it out, just in case.

Edited by Hervé
  • Like 1
Link to comment
Share on other sites

15 minutes ago, Hervé said:

I assume you meant nvda_drv=1 (not nada_drv=1 :)) which is basically for setting/activating nVidia Web Driver in CC does. But please post a copy of your Clover config so that we can check it out, just in case.

 

Oh.. I'm really sorry I forgot to attach the efi folder and screenshot of the error.

 

Below I have attached the link of my EFI folder and the screenshot of the error which I'm getting right now.

 

https://drive.google.com/open?id=1k1WRNJZXbKX58_1eSXIkqcvhGtk1os_7

 

 

IMG_20190316_214659.jpg

  • Like 1
Link to comment
Share on other sites

7 minutes ago, Hervé said:

Clove config looks Ok to me. However, you're injecting a SSDT for your nVidia card. Try without it.

 

I tried as you said. But still not working. Also I have attached one more Screenshot of the screen where it got sucked.

 

if boot by nv_disable=1 then I'm able to take log in to my screen

 

 

Please help from last one week I'm trying to get all things work in said machine configuration.

IMG_20190316_223012.jpg

Link to comment
Share on other sites

Can't say, really. Your screenshots do show that the nVidia Web Driver is loading ("NVDAStartupWeb") but it's as if it's not completing properly. You could try re-installing it and make sure you install the Web Driver version that matches your Sierra version.

 

Is this a full vanilla Sierra installation or a distro?

Link to comment
Share on other sites

26 minutes ago, Hervé said:

Clover config looks Ok to me. However, you're injecting a SSDT for your nVidia card. Try without it.

 

Somewhere in forums of InsanleyMac I  found one app as "Runme" and now I am attaching one folder link which got created through this app. 

 

https://drive.google.com/open?id=15H-0SogWpGfi3rfsdDJjkqbL4vR4QljF

3 minutes ago, Hervé said:

Can't say, really. Your screenshots do show that the nVidia Web Driver is loading ("NVDAStartupWeb") but it's as if it's not completing properly. You could try re-installing it and make sure you install the Web Driver version that matches your Sierra version.

 

Is this a full vanilla Sierra installation or a distro?

 

Yes its full vanilla Sierra Installation

Link to comment
Share on other sites

Ok, so your SysProfile shows Sierra 10.12.6 build 16G1815. You should therefore install the nVidia Web Driver version 378.05.05.25f13, available here:

 

I don't know if that's what you installed knowing that your SysProfiler showed that your Web Driver kexts version is 10.18.5:

WebDriver_kexts_version.jpg.460096898c352866e1678af4f93687c5.jpg

 

I've not looked into the relevant Sierra Web Driver available at above link to check version of the kexts it contains. But I can tell you that the Web Driver kexts installed on your system does not appear to include the necessary drivers required for your Pascal GTX1060. If you look at the above picture, you'll notice the following Web Driver NVDAxxxxWeb kexts, where xxxx is:

  • GF100Hal -> F is for Fermi cards
  • GK100Hal -> K is for Kepler cards (the generation that followed Fermi)
  • GM100Hal -> M is for Maxwell cards (the generation that followed Kepler)
  • NV50HalTesla -> is for older Tesla cards

but nothing for Pascal cards (Pascal generation followed Maxwell).

 

What you basically need to establish is if the last nVidia Web Driver for Sierra supports Pascal cards or not. The nVidia web site should provide the answer. If the stated Web Driver does into support Pascal cards, you would have to upgrade to High Sierra because Web Driver for High Sierra certainly supports Pascal cards (I've got one). Mojave is not good of course...

Edited by Hervé
  • Like 1
Link to comment
Share on other sites

Ok, I've downloaded Web Driver v378.05.05.25f13 and checked it out in Pacifist. Kexts are indeed v10.18.5 and the Pascal driver is present (NVDAGP100HalWeb.kext). I attach a copy of it.

NVDAGP100HalWeb.kext.zip

 

Maybe you did not install the Web Driver properly; I would recommend you re-install it, having downloaded it again from the above link.

Link to comment
Share on other sites

Ok, I've downloaded Web Driver v378.05.05.25f13 and checked it out in Pacifist. Kexts are indeed v10.18.5 and the Pascal driver is present

Isn’t 10.18.5 the version Marty used in Back To The Future?


Sent from my iPhone 5S using Tapatalk

Link to comment
Share on other sites

18 minutes ago, Hervé said:

Ok, I've downloaded Web Driver v378.05.05.25f13 and checked it out in Pacifist. Kexts are indeed v10.18.5 and the Pascal driver is present (NVDAGP100HalWeb.kext). I attach a copy of it.

NVDAGP100HalWeb.kext.zip

 

Maybe you did not install the Web Driver properly; I would recommend you re-install it, having downloaded it again from the above link.

 

I have already reinstalled this version of drivers https://images.nvidia.com/mac/pkg/378/WebDriver-378.05.05.25f13.pkg but still same problem I'm getting.

Link to comment
Share on other sites

9 hours ago, Hervé said:

try to add "Inject nVidia" to your Clover config.

 

I tried as u said but I need to use nv_disable=1 as web drivers are installed. and also my screen resolution got changed to 1024x768 and graphic card after injecting shows me 256mb

 

 

pls help

Screen Shot 2019-03-17 at 12.41.42 PM.png

Screen Shot 2019-03-17 at 12.41.49 PM.png

Screen Shot 2019-03-17 at 12.44.47 PM.png

Screen Shot 2019-03-17 at 12.52.58 PM.png

Screen Shot 2019-03-17 at 12.53.12 PM.png

Screen Shot 2019-03-17 at 12.53.19 PM.png

Screen Shot 2019-03-17 at 12.53.27 PM.png

Edited by chan29ster
Link to comment
Share on other sites

16 hours ago, Hervé said:

Ok, I've downloaded Web Driver v378.05.05.25f13 and checked it out in Pacifist. Kexts are indeed v10.18.5 and the Pascal driver is present (NVDAGP100HalWeb.kext). I attach a copy of it.

NVDAGP100HalWeb.kext.zip

 

Maybe you did not install the Web Driver properly; I would recommend you re-install it, having downloaded it again from the above link.

 

I have tested Nvidia Quadro M5000 8gb card by installing Nvidia web Drivers 378.05.05.25f13 and without any boot flags it worked smoothly 

also i have tested asus gt 210 2gb card this also worked by inject Nvidia.

 

But my Zotac GTX 1060 6gb Amp! Edition card is creating the same problem as earlier which I have posted in above post.

 

please help me with this. Or else if you recommend me to switch to other card then I’m looking for Sapphire RX 580 pulse 8gb 

Sapphire RX 580 nitro 8gb

or

Asus Rx 580 8gb

 

If it led me to change my graphic card my budget will get increase more.

 

please help me out to fix with this.

 

Thanks

Link to comment
Share on other sites

1 hour ago, Hervé said:

Try a different SMBIOS than iMac17,1. That can also influence on graphics acceleration / graphics card support.

 

Nothing else to offer...

 

Thanks for reply

 

I tried iMac18,3 in that too getting same problem. Any other SMBIOS if you would recommend me.

Also getting an error

 

IOPlatformPluginUtil : getCPUIDInfo : this is an unknown CPU model 0x9e

--power management may be incomplete or unsupported

 

IMG_20190317_194102.jpg

Edited by chan29ster
Link to comment
Share on other sites

  • 2 weeks later...

After trying many things.. I had to change my graphic card from zotac gtx 1060 amp edition 8gb to Sapphire Radeon RX 580 Nitro+ OC 8gb. And successfully I got the display and other things properly working. But when any drive is connected to the system and i try to shutdown the system. it gets reboot in macOS 10.12.6

Link to comment
Share on other sites

 Share

×
×
  • Create New...