So I have an HP Envy Notebook (15t-q400) which features two Band & Olufsen speakers (tweeters) and one subwoofer - the audio codec used is the ALC290 (aka the ALC 3241). I'm running on Mojave. So far I've tried AppleALC with Lilu and have no luck - the audio plays through the headphones - although very poorly - but not the external speakers at all, and I've tried everything short of writing my own XML file for it. So I've decided to go for using the VoodooHDA kext.
While VoodooHDA sees my devices immediately, they are strangely configured, and I cannot use the subwoofer or even see it listed as a device. This is my main problem.
As I'm aware the proper configuration of the laptop is:
Three speakers - one left, one right, and one subwoofer module
One 3.5mm headphone jack
An internal microphone for the webcam (this is one I'm not sure about, I don't know if it is two separate microphones or one as there are two holes in the display chasis)
In my devices while using the default VoodooHDA kext, I have
Speaker (Analogue) - Type= Apple speaker port <--- only tweeters work
Headphones (Back Right) - Type= Headphone Port <--- this seems to work well
Microphone (Black Right) - Type: Microphone Port <---- this works a little, sounds like it's muffled, not from the webcam
Microphone (ATAPI) - Type: Microphone Port <--- this works well, is definitely the webcam microphone
Here is my Pin Config (with disabled devices not ignored as I think the subwoofer is one of those devices):
Here is my Pin Config for the photo above (disabled devices NOT ignored, fix not applied).
01371c00 01371d00 01371e00 01371f40 01871c10 01871d01 01871e17 01871f90 01a71c20 01a71d10 01a71ea1 01a71f04 01d71c2d 01d71d81 01d71e75 01d71f40 01271c30 01271d01 01271ea3 01271f99 01571c40 01571d10 01571e21 01571f04 01471cf0 01471d11 01471e11 01471f41 01671cf0 01671d11 01671e11 01671f41 01771cf0 01771d11 01771e11 01771f41 01971cf0 01971d11 01971e11 01971f41 01b71cf0 01b71d11 01b71e11 01b71f41 01e71cf0 01e71d11 01e71e11 01e71f41
Here is my Pin Config for the photo above (disabled devices ignored, fix not applied):
01871c10 01871d01 01871e17 01871f90 01a71c20 01a71d10 01a71ea1 01a71f04 01271c30 01271d01 01271ea3 01271f99 01571c40 01571d10 01571e21 01571f04
I have been attempting to add the subwoofer as a node in the Info.plist of VoodooHDA but can't seem to get it to work (and frankly I'm not sure which device it is!) . I've tried adding both NID 19 and 20 into my Info.plist file for VoodooHDA but neither have done any good. Am I supposed to add the NID and PinDefault to the Info.plist AFTER Pin Configurator's fix? I was under the impression this only helped with a patched AppleHDA which VoodooHDA overwrites.
Thanks for all the help, I hope I conveyed this clearly!
I've attached my codec dump as well.
Some users claim that using VoodooHDA they hear loud bump at system start and sound in system comes with noise.
Although this can be repaired with existing drivers I propose a version that do this automatically.
It started silently and have very clear output. The file is compiled as 32/64 and works from 10.6 up to 10.12.
The sources is in my signature.
There is a VoodooHDA,prefPane compatible with Sierra
Now there is a version 2.9.0 by Zenith432.
It can work with multichannel sound and play it on 5.1 analog system.
I had to reinstall El Capitan on my Hackintosh, as it was installed in Clover Legacy Mode before (with everything working just fine).
Now I installed it again in UEFI mode and since then, Audio (ALC892) is not working anymore (Neither in UEFI or Legacymode).
I tried to install the same 2 Kexts as before (AppleHDA modified and HDAEnabler1) using Kextutility (wich was working fine before as well).
It always fails to install AppleHDA, as it cannot Backup or modify the Original AppleHDA in System/Extensions (Can't copy sourcefile).
I also tried the same, using the root Account, using terminal with kextunload / load and even a script for clover.
They all fail to modify / delete the Original AppleHDA. Trying to rename / move or delete the Original file with Terminal or Finder is not working as well, I get an Error, saying that the file cannot be modified because OS X requires it.
So how can I install the Kext to get my audio working again? System is El Capitan (10.11.6)...
I'm having audio issues with my Dell Vostro 2520's microphone with VoodooHDA
The internal microphone isn't detected, yet the microphone audio port is detected, and works.
According to Windows and Dell, my laptop has the Cirrus Logic CS4213 codec in it, so if that's important, there it is.
I am on Mavericks 10.9.5, since that works the best on this laptop, but would be open to try newer versions if things work well enough.
I can provide my DSDT if needed.
I have installed Sierra build 16G29 (10.12.6) Problem is that my integrated sound card Realtek ALC887 not works properly.
Now I have installed VoodooHDA 2.8.8 but microphone not working. Anyone can help with it? motherboard is Asus H110M-D (https://www.asus.com/us/Motherboards/H110M-D/specifications/)
CPU i3 6100 Skylake
Nvidia GTX 750 Ti