Lafin Lalannges Posted December 11, 2016 Share Posted December 11, 2016 Tried to install a new macOS, using installer made by Panadora's Box III r3.030. Took me very long time to make it happen. Then I boot up the computer, it just stuck blank screen with many '+'. Is there anything I missed? my spec: Asrock B75M-ITX (UEFI 1.90) i5-3470 Trandcend 16GB Memory (8GBx2) Kingston HyperFury X 120GB SSD Link to comment Share on other sites More sharing options...
artur_pt Posted December 11, 2016 Share Posted December 11, 2016 hello if u are using onboard graphics .. hd 2500 not compatible good hack 1 Link to comment Share on other sites More sharing options...
Lafin Lalannges Posted December 11, 2016 Author Share Posted December 11, 2016 Just forgot to add my graphics. I am using MSI Radeon HD 7730. hello if u are using onboard graphics .. hd 2500 not compatible good hack Link to comment Share on other sites More sharing options...
mynameismatthew Posted December 16, 2016 Share Posted December 16, 2016 Try booting in safe mode Also could be your BIOS settings are wrong Link to comment Share on other sites More sharing options...
Lafin Lalannges Posted December 18, 2016 Author Share Posted December 18, 2016 got system panic! check the image. http://imgur.com/LQpk7t7 Link to comment Share on other sites More sharing options...
kafky Posted December 18, 2016 Share Posted December 18, 2016 I have the same problem. Here is my crash screen: http://imgur.com/uh6EjS2 Link to comment Share on other sites More sharing options...
liujianwei Posted December 18, 2016 Share Posted December 18, 2016 I have face the same issue,it is cpu panic when I using legacy clover,here is what i do to avoid this sudo /Applications/Install\ macOS\ Sierra.app/contents/resources/createinstallmedia --volume /volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app Install for UEFI booting only Install Clover in the ESP Drivers64UEFI OsxAptioFixDrv-64 diskutil mount disk1s1 cp FakeSMC.kext /Volumes/ESP/EFI/Clover/Kexts/10.12 cp RealtekR1000SL.kext /Volumes/ESP/EFI/Clover/Kexts/10.12 # Rename USB devices for OSX 10.11 Support (remember to use injector with this) # into device label EHC1 set_label begin EH01 end; into device label EHC2 set_label begin EH02 end; into device label XHC1 set_label begin XHC end; into_all all code_regex EHC1 replaceall_matched begin EH01 end; into_all all code_regex EHC2 replaceall_matched begin EH02 end; into_all all code_regex XHC1 replaceall_matched begin XHC end; Link to comment Share on other sites More sharing options...
Recommended Posts