Jump to content
5410 posts in this topic

Recommended Posts

Your problem can't be  sure 100% from AppleALC.kext and Lilu.kext, you must patch/configure your system to normal ones. After that, we can test new AppleALC.kext for your Device

10 minutes ago, Andres ZeroCross said:

image.png.8a24f53b364be5a6993ced37d8eb8105.png

Your codec is still not recognized by AppleHDA.kext.
1. Did you use any DSDT / SSDT??? 
2. Write detail your notebook model and specifications
3. Make sure patch IRQFlag for RTC, TIMR, HPET and IPIC or tick Fix HPET, Add DTGP, IRQ, TIMR, IPIQ on Config.plist (use Clover Configurator)
4. For best analyze,, upload your CLover folder

So I have an Acer Predator Helios 500 PH517-51-72NU laptop; here are the basic specs:
CPU: i7 8750H
GPU: 1070
Ram: 16gb DDR4

 

Here is my clover

CLOVER.zip

 

Edited by yamahahornist
10 minutes ago, yamahahornist said:

So I have an Acer Predator Helios 500 PH517-51-72NU laptop; here are the basic specs:
CPU: i7 8750H
GPU: 1070
Ram: 16gb DDR4

 

Here is my clover

CLOVER.zip

So I have an Acer Predator Helios 500 PH517-51-72NU laptop; here are the basic specs:
CPU: i7 8750H
GPU: 1070
Ram: 16gb DDR4

 

Here is my clover



Use this,, reboot and upload your IOREG again

CLOVER.zip

6 minutes ago, Andres ZeroCross said:

Now use this,, just remove old AppleALC.kext ini EFI/CLOVER/Kexts/Other,, and replace with this,, reboot and post your IOREG again

AppleALC.kext.zip

I have speaker audio now!

Output shows:

Speakers

 

Input shows:

nothing

 

 

My laptop has:

Speakers

Line-out headphone

line-in microphone

iodump4.ioreg

1 minute ago, yamahahornist said:

I have speaker audio now!

Output shows:

Speakers

 

Input shows:

nothing

 

 

My laptop has:

Speakers

Line-out headphone

line-in microphone

iodump4.ioreg



Nice,, wait. I checked your Mic

4 minutes ago, Andres ZeroCross said:



Nice,, wait. I checked your Mic

What layout id should I be using?

 

So my laptop has a 3.5mm microphone input and also a built in microphone.

 

The speakers are working and headphone detecting and auto switching is working though! :D

Screen Shot 2019-01-11 at 10.50.06 PM.png

Screen Shot 2019-01-11 at 10.50.17 PM.png

Just now, yamahahornist said:

What layout id should I be using?

 

So my laptop has a 3.5mm microphone input and also a built in microphone.

 

The speakers are working and headphone detecting and auto switching is working though! :D

Screen Shot 2019-01-11 at 10.50.06 PM.png

Screen Shot 2019-01-11 at 10.50.17 PM.png

I already set layout = 21 in your config.plist

image.thumb.png.eaa2811ac1c17c0c15c7f60de9618255.png

I need to check for Mic device

I will check it later,, need to lunch. Your path of internal mis is this from your codec_dump.txt above. Did you upload wrong codec_dump??? Make sure it's from yours not other person
image.thumb.png.632c09827531520fe0c39a9ae94ab3ee.png

2 minutes ago, Andres ZeroCross said:

I will check it later,, need to lunch. Your path of internal mis is this from your codec_dump.txt above. Did you upload wrong codec_dump??? Make sure it's from yours not other person
image.thumb.png.632c09827531520fe0c39a9ae94ab3ee.png

That was my dump from linux, but I will go get another one and post it here. I need to head of to bed, hitting midnight here. Thank you for all your work! Please let me know how I can support you.

1 minute ago, yamahahornist said:

That was my dump from linux, but I will go get another one and post it here. I need to head of to bed, hitting midnight here. Thank you for all your work! Please let me know how I can support you.

Just upload new codec dump, :D

I will upload resource to AppleALC.kext's github soon

1 hour ago, yamahahornist said:

Here is a fresh codec dump straight from Linux; thank you!

codec_dump1.txt


Replace the old ones,, and boot. Cek your internal mic

AppleALC.kext.zip

Same problem here as above with ALC256.

 

Laptop specs : Dell 5570 , with Intel i5-8250u and Intel uhd620.

 

Using ssdt for alc256 , codeccommander in l/e and latest build of applealc. 

Problem is with headphones audio. 

With layout 13 or 56 internal audio is fine but no audio from headphones(headphone are recognised but no audio at all).

With layout 11 or 5 audio from headphones is back but it is at low volume and it is lost after sleep. After second time waking up from sleep it comes back again.

 

Please help fix this problem.

Terminal Saved Output.txt

debug_11806.zip

I have a question. Anyone have a working pass-through of AC3 and DTS streams to the SPDIF output? I have on codecs ALC 1150, 892 and 887 is obtained only stereo. If you use VoodooHDA then AC3 and DTS are transmitted as is. And with AppleALC it turns out only stereo.

1 hour ago, ACIDSky said:

I have a question. Anyone have a working pass-through of AC3 and DTS streams to the SPDIF output? I have on codecs ALC 1150, 892 and 887 is obtained only stereo. If you use VoodooHDA then AC3 and DTS are transmitted as is. And with AppleALC it turns out only stereo.

acidsky on realtek does not work.

Edited by tyufhl
1 hour ago, Andres ZeroCross said:


Use this,, check the internal mic

AppleALC.kext.zip

Output is working great; input is showing "internal microphone" but it's just white noise and isn't actually picking anything up.

 

My laptop does have two "inputs":

 

There is a 3.5mm jack for a microphone; then it has the built in one.

Screen Shot 2019-01-12 at 10.52.44 AM.png

×
×
  • Create New...