angelol Posted January 30, 2016 Share Posted January 30, 2016 Hello guys.I have a toshiba satellite c650-17v laptop that has an i3 330m (an aftermarket addition, since it came with P6000 which is similar to the first gen i3 but underclocked and with less features.)I have successfully installed El Capitan v 10.11.3 on it. I've used giorfrida's patch utility to patch my AppleIntelHDGraphicsFB.kext but I can't seem to get fully to work. VendorID is 8086 and DeviceID is 0046. Because the screen is broken I've connected an external tv screen and I only got CI, not QE. Link to comment https://www.insanelymac.com/forum/topic/310675-toshicba-laptop-i3-330m-no/ Share on other sites More sharing options...
0000-1248 Posted January 30, 2016 Share Posted January 30, 2016 Have you determined what display connector your computer uses? If it uses eDP, you're out of luck, but if you use LVDS, QE/CI can work. My Lenovo G560 uses the LVDS connector, so I get full resolution and Quartz Extreme support. You can find it out here. Also be sure to try the kexts that they patched. I use these with my Lenovo and the Integrated GPU works fine (although, VGA out is patchy. They said it works great in clamshell mode, however). Hope I could help, - Matt 2 Link to comment https://www.insanelymac.com/forum/topic/310675-toshicba-laptop-i3-330m-no/#findComment-2211692 Share on other sites More sharing options...
angelol Posted January 31, 2016 Author Share Posted January 31, 2016 Sadly it,must be a hardware issue. The story goes like this: I drop the laptop down and the screen broke, along with some unimportant plastic. Now, I don't have any problem gluing the plastic together or replacing any cable in there. I've ordered a new screen, a new lvds connector cable, because I wasn't sure that the screen was the only broken thing. Turns out,I need a new motherboard. My original thought was to use it as an entry type mac mini, without a built in screen. Probably, the hypothetical built-in display works great. Of that I'm sure now. will try to reassembly it back together so I can close the lid and see if the vga gets QE.. Link to comment https://www.insanelymac.com/forum/topic/310675-toshicba-laptop-i3-330m-no/#findComment-2211901 Share on other sites More sharing options...
angelol Posted February 2, 2016 Author Share Posted February 2, 2016 Just to be sure, what should i inject through clover if i've used the patcher utility? I'm injecting my card through dsdt and clover with fakeid. Link to comment https://www.insanelymac.com/forum/topic/310675-toshicba-laptop-i3-330m-no/#findComment-2212888 Share on other sites More sharing options...
Recommended Posts