Frankiep Posted August 12, 2015 Share Posted August 12, 2015 I have installed El Capitan PB1 using this chris111's Chameleon Installer and all worked fine but after update to PB2 (from app store) i got kernel panic (see image here) I'm using Enoch 2737 and this org.chameleon.boot.plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel Flags</key> <string>kext-dev-mode=1</string> <key>Legacy Logo</key> <string>Yes</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>No</string> </dict> </plist> just tried too without luck: acpi=off ncpi=0x2000 cpus=1 PCIRootUID=0 PCIRootUID=1 rootless=0 darkwake=0 dart=0 any idea? Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/ Share on other sites More sharing options...
Rocky12 Posted August 12, 2015 Share Posted August 12, 2015 Hi Try to use The appleacpiplatform kext from BP 1 if it doesn't work try one from DP1 in ur Extra Extension 1 Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159707 Share on other sites More sharing options...
chris1111 Posted August 12, 2015 Share Posted August 12, 2015 You can try this boot plist <key>EthernetBuiltIn</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel Flags</key> <string>-v darkwake=0</string> <key>Legacy Logo</key> <string>Yes</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>Yes</string> 1 Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159729 Share on other sites More sharing options...
Frankiep Posted August 12, 2015 Author Share Posted August 12, 2015 Hi Try to use The appleacpiplatform kext from BP 1 if it doesn't work try one from DP1 in ur Extra Extension tried to replace AppleACPIPlatform.kext in S/L/E (btw it seems the same file) without results. Tried to copy it in Extra/Extensions without results too. You can try this boot plist <key>EthernetBuiltIn</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel Flags</key> <string>-v darkwake=0</string> <key>Legacy Logo</key> <string>Yes</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>Yes</string> same KP Thinking that the problem was PB2 i have updated directly from PB1 to PB6 (build 15A244d) with a delta update but the problem is still here. On my system (you can see it in the signature) i boot MAC OS X since 10.7 smoothly using chameleon with GE=Yes and PCIRootUID=0 flags. Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159742 Share on other sites More sharing options...
chris1111 Posted August 12, 2015 Share Posted August 12, 2015 tried to replace AppleACPIPlatform.kext in S/L/E (btw it seems the same file) without results. Tried to copy it in Extra/Extensions without results too. same KP Thinking that the problem was PB2 i have updated directly from PB1 to PB6 (build 15A244d) with a delta update but the problem is still here. On my system (you can see it in the signature) i boot MAC OS X since 10.7 smoothly using chameleon with GE=Yes and PCIRootUID=0 flags. Did you try Update one at the time maybe its better ? 1 Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159745 Share on other sites More sharing options...
Frankiep Posted August 12, 2015 Author Share Posted August 12, 2015 Did you try Update one at the time maybe its better ? i tried to update from PB1 to PB2 with app store and at reboot got KP. Then i tried to update from PB1 to PB6 with delta update (.pkg) and at reboot got KP. What do you mean? Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159747 Share on other sites More sharing options...
chris1111 Posted August 12, 2015 Share Posted August 12, 2015 i tried to update from PB1 to PB2 with app store and at reboot got KP. Then i tried to update from PB1 to PB6 with delta update (.pkg) and at reboot got KP. What do you mean? Try PB1 to PB2 and set this on boot plist <key>UseKernelCache</key> <string>Yes</string> Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159751 Share on other sites More sharing options...
Frankiep Posted August 12, 2015 Author Share Posted August 12, 2015 ok. i have to install chameleon on the partition or i can use the INSTALLER usb to boot into partition? Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159767 Share on other sites More sharing options...
chris1111 Posted August 12, 2015 Share Posted August 12, 2015 ok. i have to install chameleon on the partition or i can use the INSTALLER usb to boot into partition? Used Post Installer Enoch 2731 inside, dont change the boot plist just select FakeSMC / PC / GraphicsEnabler=Yes 1 Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159770 Share on other sites More sharing options...
Frankiep Posted August 13, 2015 Author Share Posted August 13, 2015 good news here. So i have reinstalled PB1, then i used Chameleon Post to install Enoch and fakesmc.kext and finally updated to PB2 with app store. No more kernel panic Then, to understand where the problem were, i replaced the org.chameleon.boot.plist (generated by Chameleon Post) with this one (that i use on Yosemite): <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel Flags</key> <string>kext-dev-mode=1</string> <key>Legacy Logo</key> <string>Yes</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>No</string> </dict> </plist> and kernel panic is back. So finally i changed UseKernelCache flag to Yes and it booted again. Thanks guys! 1 Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2159970 Share on other sites More sharing options...
jsl Posted August 13, 2015 Share Posted August 13, 2015 I have installed El Capitan PB1 using this chris111's Chameleon Installer and all worked fine but after update to PB2 (from app store) i got kernel panic (see image here) I'm using Enoch 2737 and this org.chameleon.boot.plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel Flags</key> <string>kext-dev-mode=1</string> <key>Legacy Logo</key> <string>Yes</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>No</string> </dict> </plist> just tried too without luck: acpi=off ncpi=0x2000 cpus=1 PCIRootUID=0 PCIRootUID=1 rootless=0 darkwake=0 dart=0 any idea? Current working version of Chameleon is v.2732 and must boot with UseKernelCache=Y & FakeSMC.kext in /S/L/Extensions. Otherwise you may get Kernel Panic during booting for El Capitan PB2~PB4 or DP4~DP6. 1 Link to comment https://www.insanelymac.com/forum/topic/307550-kp-after-update-to-pb2/#findComment-2160006 Share on other sites More sharing options...
Recommended Posts