Jump to content

come abilitare HDMI su Sapphire Radeon HD7770 Ghz Edition ?

blackx1

By blackx1,
in Desktop

 Share
30 posts in this topic

Recommended Posts

blackx1
blackx1
Posted
Posted

MB Asus P5Q-Pro

Core 2 Duo

Sapphire Radeon HD 7770 Ghz Edition (OOB on 10.9.4)

Audigy 2 ZS (ok con Audigy kext)

Realtek ALC1200 audio integrato (non ho installato, conoscete qualche valido kext ?)

S.O. MACOSX 10.9.4

Monitor TV Full HD

 

Funziona tutto bene ma non ho HDMI abilitato, dopo svariate ricerche e prove di procedure (tutte rigorosamente in inglese .....)  purtroppo non andate a buon fine, vi chiedo se per cortesia c'è qualcuno che può postare una procedura in italiano semplice (per quanto ovviamente possibile :) ) per abilitare l'HDMI dalla Sapphire Radeon HD 7770 Ghz Edition.

 

Ringrazio anticipatamente chiunque può e vuole dedicare del tempo a questo post

 

buona giornata

 

Marco

blackx1
blackx1
Posted
  • Author
Posted (edited)

buongiorno già abilitato ma non funziona, evidentemente manca qualcosa ma non so cosa, queste sono le uniche operazioni effettuate: ho installato Mavericks con usb-[url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], bootloader Boot0md Darwin /x86 boot v5.0.132 Chameleon v2.2svrn r2286 post-installazione con [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] (ho inserito solo:3rd Party SATA, EVOREBOOT, FAKEsmc V6.9.1315, AppleRTC Patch for CMOS Reset, Patched OS X 10.9.0, System Definitions Mac Pro 6.1), ho installato kXAudioDriver-1.11b0 e AtherosL1eEthernet.kext e con Chameleon Wizard (Org.chameleon.Boot.plist: EnableHDMIAudio=Yes, EthernetBuiltIn=Yes, Kernel Flags=-v), nessun DSDT, tutto il resto è originale. in precedenza avevo provaro anche con e senza Modules HDAEnabler.dylib (installato con Chameleon Wizard) aggiungendo a Org.chameleon.Boot.plist: HDAEnabler=Yes, DEFLayoutID=01000000 hai dei suggerimenti da potermi dare ? grazie per il tuo tempo e per aver risposto al post

Edited by carbo178
Regolamento, i tools di Tonymac non sono supportati
  • 1 month later...
polyzargone
polyzargone
Posted
Posted

buongiorno Fabio !

Sono francese, non parlo italiano. Posso farle una domanda? Ora parlero in inglese.

 

Here's my setup

ASRock Conroe1333-eSATA2

Core2Duo e 6750 @ 2,66 GHz

4Gb DDR2

Sapphire AMD Radeon HD 7770 1 GB GDDR5 (2 Display Port,1 HDMI, 1 DVDI-I DL)

OS X 10.10 (problem was the same with Mavericks)

 

I'm trying desperately to get HDMI audio with my Sapphire Radeon HD 7770 with no success. I tied patched AppleHDA with HDEF DSDT patch but my motherboard is incompatible with that accordind to Mirone. I tried VoodooHDA but I have no output for HDMI in System Preferences. I also tried to enter my device IDs in VoodooHDA info.plist but I still have no output (analog output works fine though).

Any idea ?

 

thanks

polyzargone
polyzargone
Posted
Posted

Thanks for the reply :)

 

here you are : untouched DSDT + IOreg

 

PS : I have patched my AMD7000Controller.kext according to RampageDev guide http://rampagedev.wordpress.com/kext-editing/editing-atiamd-framebuffer-personality/

 

With the patched kext loaded, I have analog (not HDMI) audio when HDMI and/or DVI-I is connected to my TV but if I use the stock kext from OS X, I only have audio through DVI-I, not whith HDMI.

 

The DSDT + IOreg attached have been extracted from a non-patched AMD7000Controller.kext setup.

DSDT_IOREG_Poly.zip

polyzargone
polyzargone
Posted
Posted

ALC888 Layout 9

 

Default ATY framebuffer :

ASCore:~ vince$ ioreg | grep ATY
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@0  <class AtiFbStub, id 0x1000002ec, registered, matched, active, busy 0 (40068 ms), retain 8>
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@1  <class AtiFbStub, id 0x1000002ed, registered, matched, active, busy 0 (1 ms), retain 8>
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@2  <class AtiFbStub, id 0x1000002ee, registered, matched, active, busy 0 (1 ms), retain 8>
    | |   |   | +-o ATY,AMD,RadeonFramebuffer@3  <class AtiFbStub, id 0x1000002ef, registered, matched, active, busy 0 (1 ms), retain 8>

 

With patched  AMD7000Controller.kext, the framebuffer is Chutoro or Buri (both patched and working… sort of ;) )

 

I also removed AppleHDADisabler & AppleHDA. Just left VoodooHDA. With patched AppleHDA from Mirone, I have all the ouptuts but no sound at all (both in HDMI & DVI)

polyzargone
polyzargone
Posted
Posted

Chameleon r2456

 

    <key>Boot Banner</key>
    <string>No</string>
    <key>EnableHDMIAudio</key>
    <string>Yes</string>
    <key>EthernetBuiltIn</key>
    <string>Yes</string>
    <key>GenerateCStates</key>
    <string>Yes</string>
    <key>GeneratePStates</key>
    <string>Yes</string>
    <key>Hide Partition</key>
    <string>hd(0,3) hd(2,2)</string>
    <key>Kernel</key>
    <string>/System/Library/Kernels/kernel</string>
    <key>Kernel Flags</key>
    <string>kext-dev-mode=1 npci=0x2000 darkwake=0</string>
    <key>Legacy Logo</key>
    <string>Yes</string>
    <key>SMBIOS</key>
    <string>/Extra/SMBios.plist</string>
    <key>SystemType</key>
    <string>1</string>
    <key>Theme</key>
    <string>Default</string>
    <key>Timeout</key>
    <string>5</string>
    <key>UseKernelCache</key>
    <string>Yes</string>
 

polyzargone
polyzargone
Posted
Posted

No change. :(


Well I made some changes to your DSDT to inject additional infos for my GFX. I also added an HDEF section. It boot fine with Chutoro loaded and correct infos in SystProfil but I still have not HDMI outputs. I don't used GraphicsEnabler=Yes/No, ATIConfig or ATIPorts anymore, all this is correctly inject with this mod DSDT.

 

I still HAVE to use a patched framebuffer in order to have analog sound with both HDMI/DVI ! I'm lost on that point.

 

I just re-tried to use Mirone's AppleHDA with no sucess at all. All outputs are there but none of them works !     :wallbash::hammer:

 

Could you check it to see if I made mistakes ?

Thanks for time and patience ;)

DSDT_HDMI2.aml.zip

polyzargone
polyzargone
Posted
Posted

thanks for the link & help !

It's not a big deal for me, I just wanted to have a 100% configured Hack. I'll manage with VoodooHDA if it still doesn't work after reading the thread.

 

Arrivederci, ciao e Grazie Mille !

 Share
Go to topic listing
×
×
  • Create New...