YungRaj Posted May 1, 2014 Share Posted May 1, 2014 Hi, When I use clover it manually set my SMBios as the MacbookPro11,1 which I was fine with until I tried booting an installer. The thing is that the installer wouldn't boot because I would get a message "OS X is not supported on this platform". When I went to /System/Library/CoreServices/PlatformSupport.plist I found that the list of Apple Devices did not have the macbookpro11,1. So what I did was is change my SMBios to a particular one that Clover supported and was on the PlatformSupport.plist. When I tried booting, it would just stick on the Apple Logo with no spinning circle and or it would freeze at loading the boot.efi file when using UEFI Clover. When I used Chameleon, I patched kernel for Haswell MSR's and all that (along with Clover with config.plist) and tried the same thing and I would get stuck at "Pthread Support ABORTS when sync kernel is misused" Google didn't really put an eye on this issue..... However something about Aptio AMI UEFI Motherboard's came up, (I did the OSXAptioFix option in Clover) Please help me thank you. This is my first Intel Hack so Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/ Share on other sites More sharing options...
RehabMan Posted May 1, 2014 Share Posted May 1, 2014 Hi, When I use clover it manually set my SMBios as the MacbookPro11,1 which I was fine with until I tried booting an installer. The thing is that the installer wouldn't boot because I would get a message "OS X is not supported on this platform". When I went to /System/Library/CoreServices/PlatformSupport.plist I found that the list of Apple Devices did not have the macbookpro11,1. So what I did was is change my SMBios to a particular one that Clover supported and was on the PlatformSupport.plist. When I tried booting, it would just stick on the Apple Logo with no spinning circle and or it would freeze at loading the boot.efi file when using UEFI Clover. When I used Chameleon, I patched kernel for Haswell MSR's and all that (along with Clover with config.plist) and tried the same thing and I would get stuck at "Pthread Support ABORTS when sync kernel is misused" That message is a red-herring. Same message is shown on boot on my real Apple MacBookAir6,2. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016464 Share on other sites More sharing options...
YungRaj Posted May 1, 2014 Author Share Posted May 1, 2014 Not really sure what that means lol But yea Clover was reinstalled on another USB and it started working, except Voodoo and Apple PS2 were loading and trackpad and keyboard were not. Chameleon just gets stuck at Pthread support aborts when sync kernel is misused. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016472 Share on other sites More sharing options...
RehabMan Posted May 1, 2014 Share Posted May 1, 2014 Not really sure what that means lol But yea Clover was reinstalled on another USB and it started working, except Voodoo and Apple PS2 were loading and trackpad and keyboard were not. Chameleon just gets stuck at Pthread support aborts when sync kernel is misused. http://en.wikipedia.org/wiki/Red_herring Cliff's notes version: You should ignore that message as it will not lead you to a solution. The message is normal and happens on real Macs. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016489 Share on other sites More sharing options...
Ramalama Posted May 1, 2014 Share Posted May 1, 2014 Hi, When I use clover it manually set my SMBios as the MacbookPro11,1 which I was fine with until I tried booting an installer. The thing is that the installer wouldn't boot because I would get a message "OS X is not supported on this platform". When I went to /System/Library/CoreServices/PlatformSupport.plist I found that the list of Apple Devices did not have the macbookpro11,1. So what I did was is change my SMBios to a particular one that Clover supported and was on the PlatformSupport.plist. When I tried booting, it would just stick on the Apple Logo with no spinning circle and or it would freeze at loading the boot.efi file when using UEFI Clover. When I used Chameleon, I patched kernel for Haswell MSR's and all that (along with Clover with config.plist) and tried the same thing and I would get stuck at "Pthread Support ABORTS when sync kernel is misused" Google didn't really put an eye on this issue..... However something about Aptio AMI UEFI Motherboard's came up, (I did the OSXAptioFix option in Clover) Please help me thank you. This is my first Intel Hack so Use 10.9.2 installer! Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016510 Share on other sites More sharing options...
YungRaj Posted May 1, 2014 Author Share Posted May 1, 2014 How did you know I was using 10.9.1 Rehabman okay I understand . It looked like an improper message I guess I get stuck at com.apple.fscompressionzlib Or PCI configuration end Not really sure where the boot is af that point On behalf of clover, adding trackpad kexts didn't help, I was still not having trackpad or keyboard inside the installer Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016521 Share on other sites More sharing options...
Ramalama Posted May 1, 2014 Share Posted May 1, 2014 no, doesnt matter where you do it :-) Where i know it? Because you asked MacbookPro11,1 smbios doesnt work for installer... 10.9.2 is the first osx that supports Macbookpro11,1 smbios! Cheers :-) Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016568 Share on other sites More sharing options...
YungRaj Posted May 1, 2014 Author Share Posted May 1, 2014 What about the issue with the Keyboard and trackpad Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016616 Share on other sites More sharing options...
Ramalama Posted May 1, 2014 Share Posted May 1, 2014 on asus q301la ? Remove voodoo and: Use ElanTouchpad_v3.7_Final.zip http://forum.osxlatitude.com/index.php?/topic/1948-elan-touchpad-driver-mac-os-x/ If you want to modify the touchpad/keyboard settings upen the plist inside kext, or use this script: http://forum.osxlatitude.com/index.php?/topic/6385-script-appleps2elan-asusnbfn-configuration-script/ (the oldest one without date is for v3.7, the newer scripts are for 3.8, but 3.8 is not released atm!) Cheers :-) 1 Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016622 Share on other sites More sharing options...
YungRaj Posted May 1, 2014 Author Share Posted May 1, 2014 I tried that, the boot just stopped and didn't work. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016630 Share on other sites More sharing options...
Ramalama Posted May 1, 2014 Share Posted May 1, 2014 have you a log? 1 Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016646 Share on other sites More sharing options...
Ramalama Posted May 1, 2014 Share Posted May 1, 2014 yes, that comes because your Touchpad version ID is not in the elan drivers supported.... I need a log, if you want get support for your touchpad! (log from console) Cheers :-) 1 Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016676 Share on other sites More sharing options...
YungRaj Posted May 1, 2014 Author Share Posted May 1, 2014 Here's the log my USB. EDIT: I can only boot my USB without caches, otherwise NullCPU and FakeSMC will not load. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016692 Share on other sites More sharing options...
Ramalama Posted May 1, 2014 Share Posted May 1, 2014 can you make me please a log without voodoo and with elanTouchpad 3.7 ? I need the logs from the kext... the log is okay, but now please install this kext and make again a log :-) _________________ One other thing, you have some errors XCPM: P-state table mismatch (error:0x4) X86PlatformShim::sendPStates - pmCPUControl (XCPMIO_SETPSTATETABLE) returned 0x4 X86PlatformShim::start - Failed to send PStates X86PlatformShim::start - Failed to send stepper Make with ssdtprgen.sh a ssdt! https://github.com/Piker-Alpha/ssdtPRGen.sh SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0 Seems like you are using 1. (very old FakeSMC.kext) if yes, update it to newest (v6.6) Or you have in FakeSMC.kext/info.plist under the keys part a missing &Num entry! 1 Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016694 Share on other sites More sharing options...
Ramalama Posted May 1, 2014 Share Posted May 1, 2014 Update your FakeSMC.kext you wont break anything... Just update to newest version... And make me a log with Elan kext :-) Going sleep now :-) 1 Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016697 Share on other sites More sharing options...
YungRaj Posted May 1, 2014 Author Share Posted May 1, 2014 Here's the log of ELAN loaded. With this driver it looks like keyboard is loaded, but after that something failed I can boot with caches with ELAN installed. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016698 Share on other sites More sharing options...
YungRaj Posted May 2, 2014 Author Share Posted May 2, 2014 Please remove this post. It was a complete corrupted cache and corrupt permissions. Remade this USB and it works fine. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016729 Share on other sites More sharing options...
Ramalama Posted May 2, 2014 Share Posted May 2, 2014 are you using Elan & Voodoo in the last log? Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016792 Share on other sites More sharing options...
YungRaj Posted May 2, 2014 Author Share Posted May 2, 2014 Okay OS X is working 100% now but ELAN Trackpad does not allow scrolling with two or more fingers on the trackpad. (The trackpad's buttons are on the trackpad) Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016897 Share on other sites More sharing options...
Ramalama Posted May 2, 2014 Share Posted May 2, 2014 go into trackpad settings, and move once the scrollspeed ---> voila scrolling works! you can enable/disable trackpad buttons inside the kext info.plist! (HW3SimulatedButtons) Cheers Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016921 Share on other sites More sharing options...
YungRaj Posted May 2, 2014 Author Share Posted May 2, 2014 Oops... I meant to say that it doesn't allow Mouse Tracking with two fingers on the Trackpad. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016922 Share on other sites More sharing options...
Ramalama Posted May 2, 2014 Share Posted May 2, 2014 What is mouse tracking? Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016923 Share on other sites More sharing options...
YungRaj Posted May 2, 2014 Author Share Posted May 2, 2014 Like moving the mouse...... LOLOLOL My trackpad's buttons and whatnot are on the part where you use the trackpad to scroll and move the mouse If I have a second finger on the button ("right click button") it doesn't move. I can only have one finger on the trackpad to move the mouse. Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016924 Share on other sites More sharing options...
Ramalama Posted May 2, 2014 Share Posted May 2, 2014 Moving pointer with 2 finger? like moving with 1 finger? You mean like Hold&Move (drag) with 2fingers? Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016926 Share on other sites More sharing options...
YungRaj Posted May 2, 2014 Author Share Posted May 2, 2014 The button to left click on my trackpad is a is also where you can move the mouse. So therefore my finger that is on the left click button cannot be touching it when moving the mouse pointer because it doesn't move. I can only have 1 button at the trackpad (also including the left click button are) to move the pointer. It's quite inconvenient. The Windows Drivers allow me to do so Yes, I think Link to comment https://www.insanelymac.com/forum/topic/297778-cloverstuck-on-bootefi-and-chameleonpthread-support-aborts-when-sync-kernel-is-misused/#findComment-2016927 Share on other sites More sharing options...
Recommended Posts