Jump to content
8 posts in this topic

Recommended Posts

I have just replaced my mini wireless card to a BCM94322HM8L, i found it lying on my shelf and found that its compatible. Doesn't have Bluetooth but i don't really use that anyway! i found a guide on dells website on how to replace: ftp://ftp.dell.com/Manuals/all-products/esuprt_laptop/esuprt_alienware_laptops/alienware-m17x-r4_Owner%27s%20Manual_en-us.pdf

Pages within the PDF you will need to look at:

12, 14, 41, 45, 49.

The replacement procedure took around 15mins.

 

What I did:

 

I removed the already installed Intel 2230 wireless card and replaced it with my BCM94322HM8L that is compatible. After removing the 2230 I reinstalled it into the second slot of the m17x R4. I put the wireless antennas back onto the 2230. There is an additional grey antenna which I connected to the BCM94322HM8L.

 

By having this set-up it allows the compatible card in slot one to be recognised by OS X. And by having the original (non compatible) card in the second slot it allows me to use its Bluetooth compatibilities (which can also be used in OS X). I have already tested the Bluetooth of the 2230 in os x and it seemed to be working.

 

To get Bluetooth working:

 

To be honest I just installed iatkos ML2 and it worked! I understand others are having problems but for me it was that easy. I didn't select anything specific in the setup.

 

Additionally

Just thought i would share it with everyone that I extracted the DSDT from the system and couldn't seem to compile it as there were many errors, but I got some help from someone else and they fixed it for me so it now compiles.

I not sure what I should do with it next as I'm not the best at DSDT'ing. I would be grateful if anyone could give some direction on what to do with it next. I'm willing to send the file to you if you don't want to go through the whole processes of extraction and fixing error.

 

What I selected in iAtkos ML2:

 

Unticked graphics enabler

Unticked kernel cache

Graphics mode: 1920x1080

Quiet boot ticked

Original apple logo ticked

Disabler ticked

Fake SMC ticked

Evoreboot ticked

RTC ticked

Macbook pro 9,1 ( when booted changed it to 10,1 I think it was as they were similar processors)

Ah I data ticked

Sound ticked ( this worked for me although JONATHANSLAM said that Voodoo 0.2.7.3 works okay - would recommend that)

Hardware monitor ticked

CPU ticked

Motherboard ticked

PS/2 ticked

Laptop battery ticked.

 

I have also realised there there is an Intel 4000 option to choose in iaktos ML2 but I'm not sure what options within that subheading to choose. Maybe someone could help out with that.

 

Last thing... If anyone can help out with getting the 7970m work I would be really greatfull! I understand there is 7970 dsdt edit but as already mentioned, I'm not the best with DSDT's

 

Cheers!

I have found a little guide/help on how to get the Intel 4000 working. Please report back if anything is successful! Its in Portuguese mind, but that can't stop the good old gtranslate.

 

http://olarila.com/forum/viewtopic.php?f=3&t=1583

 

hello

 

english version of that

 

http://olarila.com/forum/viewtopic.php?f=28&t=3111

 

all the fundamental guides in english are in english section of the site

 

Guides and Tutorials

 

good hack

  • Like 1
  • 6 months later...

Alienware M17x R4 with nvidia geforce 675M WORKING:

 

Here is what I did:

 

flashed A11 unlocked bios V2 found over TechInferno forums

 

Same BIOS config as Jonathanslam in post #4

 

Boot iAtkos ML2 with -v -x flags

 

What I selected in iAtkos ML2: Thanks to mattrowe

Unticked graphics enabler
Unticked kernel cache
Graphics mode: 1920x1080
Quiet boot ticked
Original apple logo ticked
Disabler ticked
Fake SMC ticked
Evoreboot ticked
RTC ticked
Macbook pro 9,1 (changed it to Macbook Pro 8,1)
***Sound ticked Voodoo 0.2.7.3 (looking for a better solution since you can't change the master volume)
Hardware monitor ticked
CPU ticked
Motherboard ticked
PS/2 ticked
Laptop battery ticked

***nVidia Driver's ticked

 

Booted it with -v flags and booted OK but only 64MB of shared memory so....

 

I then Installed Chimera v2.2.1 r2248

 

Changed smbios.plist to Mac Book Pro 8,1

 

Rebooted and I disabled the Intel HD4000 GPU in the BIOS (unlocked option)

 

Booted OSX with -v and it worked.

 

Will test later with Both GPU enabled to see if its still OK and I'll reply back

×
×
  • Create New...