Jump to content
Sign in to follow this  
Ritter77

Need Help installing Mac OS X on AMD windows 7

2 posts in this topic

Recommended Posts

Hello,

 

I've a PC with AMD processor and when I try to run mac os x 10.8 on vmware workstation I get the following error:

The CPU has been disabled by the guest operating system. Power off or reset the virtual machine.

 

After that, I tried installing the mac on my laptop which has intel i5 (windows 7 64 bit) processor and it worked fine and I didn't encouter that error at all.

 

I want now to install it on my pc. I've also tried version 10.6 and the same error came up.

 

I searched the internet and tried some of the easy solutions but none worked. And some solutions were complicated and I didn't understand them.

 

My pc specs are as follows:

processor: AMD Phenom™ II X3 720 -- 3.42 GHz

Memory: 4GB

Windows 7 64-bit

 

Thanks in advance

Share this post


Link to post
Share on other sites
Advertisement

Mac does NOT support AMD so you would need to find a release with hacked kernel

 

If something seems too complicated, then maybe the task is not for you?

 

Also this section is for virtualization, so please post in a correct section

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ITzTravelInTime
      Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
       
      The name means: TINU Is Not #####, the U refers to a popular software that is used to create Mac OS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
       
      This app basically is a graphical interface for the createinstallmedia executable that is inside the Mac OS installer apps, it is capable to create a Mac OS installer on a drive completely vanilla like what you do using the command line method, and also this method is recommended by apple itself.
       
      Allows you to create easily a macOS install media without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install clover on the usb drive once TINU has finished or leave it as is you want to use it on a Mac.
       
      Features:
        - Simple to use UI that allows you to easily start the macOS install media creation process   - It can work with every Mac OS installer app that has the createinstallmedia executable inside of it's resources folder (including also beta and newly released installers)   - You can use any drive or partition you want that can be erased and is at least 7 GB of size   - Works on Mac OS recovery, so you can create a macOS install media from a bootable macOS installer or from the macOs recovery   - All vanilla, the macOS install medias created with this tool are 100% vanilla, just like you created them using the command line "createinstallmedia" method   - Open source, you will know what this program does on your computer and also you can create your own version by downloading and playing with the source code   - Does not requires to do anything of special first, just open the program   - No need to go in disk utility first, TINU can format your drive for you   - Uses recent and more modern APIs and SDKs and Swift 3 language   - Transparent graphics style available (use alt + s on the keyboard or View->Use transparent style)   - Works using the latest versions of macOS and will also support newer Mac installers out of the box without needing for an update    Features that I'd like to add in the future:    - Advanced section, to customize your macOS install media   - Installer customization: Kernelcache/prelinkedknerel and boot files replacement (a feature that can be handy while dealing with old Macs or with beta installers when you need to mod or change the boot files some times)   - Install clover and configure clover   - Install kexts inside the kexts folder of clover   - Clover drivers customization   - Use custom dsdt in clover   - integrated pre-made clover config templates database from a remote and open repository   - Support for other languages, at least Italian   Rquirements:  - A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer)  - A drive or a free partition of at least 7 GB that you want to turn into a macOS/Mac OS X installer  - A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive in your machine (excepted the drive or volume you want to turn into your macOS install media)   Note that this app is under the GNU GPL v3 license so any reuse of the source code must follow the license's terms   TINU 1.1 Stable release:    - Download available here:    https://github.com/ITzTravelInTime/TINU/releases    - Source code:     https://github.com/ITzTravelInTime/TINU   TINU 2.0 pre-release:    - Source code:    https://github.com/ITzTravelInTime/TINU/tree/development    - Download available here:    https://dl.dropboxusercontent.com/s/nvzss51qcieynve/TINU.zip     Frequently asked questions about TINU: https://github.com/ITzTravelInTime/TINU/wiki/FAQs     NOTE: if you have problems with your USB installer of 10.13.4 or newer version not being detected by clover you have to use the latest clover and if it still does not detectets your usb installer you have to remove the invivible file called .IAPhysicalMedia located into the root of the usb installer. This issue is caused by a changement in the apple's createinstallmedia, don't blame TINU for that, tinu does only uses the installer creation method from apple, which has been changed, causing this problem for hackintosh users, this issue should be resolved in the latest versions of clover which will no longer require that you do changements to let your usb dive to be detected, a setting to do this fix automatically in tinu is also comeing in a new pre-release of TINU 2 I leave also some screenshots as well








    • By JDizz
      #UPDATE AS OF APRIL 27, 2018 Thursday, 3:53 PM EST

      SIMPLE INSTRUCTIONS
      After you figure out how to get High Sierra 10.13 or 10.13.4 installed to a USB with Clover Bootloader, and you're loaded onto MacOS High Sierra:

      Download Clover Configurator and MOUNT your partition and OPEN it to reveal your EFI folder. Delete it.
      Simply download the attached ZIP and unzip it by double clicking it. Then copy and paste the EFI folder you unzipped to the location of your mounted partition.

      Done. Enjoy. Special thanks to Jake Lo !


      WORKING [Dell M6800 - High Sierra 10.13.4]
      Sleep/Wake WHILE THE POWER CORD IS PLUGGED IN (Not from closing the screen down, but from clicking the Apple logo and sleep or by timer).
      Wi-Fi (AirPort Extreme) via Broadcom BCM43xx.
      2 USB ports on the LEFT side as USB 2.0/3.0 and the 1 USB 2.0/eSATA on the back.
      KeyBoard.
      TouchPad (With MultiTouch - Fully functional)
      iMessage, iCloud, FaceTime, AppStore work perfectly.
      NVIDIA Graphics work perfectly thanks to the Lilu and NvidiaGraphicsFixUp kext. THIS FIXES THE BLACK OR BLANK SCREEN PROBLEM.
      DVD-Drive/Burning if you even care to use CD, DVD disk.
      Bluetooth (Works even with Apple HomePod =] )
      Ethernet/RJ-45
      2 USBs on right side as USB 2.0/3.0
      Native Sound (On board Speakers and can adjust sound with buttons)
      SD Card Readers
      Adjusting Brightness (Download an app from the AppStore called Brightness Slider -OR- use Night Shift [will not adjust brightness, but will be bearable]).


      NOT WORKING [Dell M6800 - High Sierra 10.13.4]
      Headphone Jack (Excessive Static)
    • By verymilan
      Hi, i recently set up High Sierra on my AMD computer with the help of the amdosx community (i actually used an installer just to confirm that something would work in the first place before i spend hours for nothing, i can and could have downloaded High Sierra the "legal" way).
      However the graphicscard is recognized properly, the 6gig are recognized and i have no artifacts and no screen tearing with the official nvidia webdriver,
      but unfortunally, dark colors have horizontal dark stripes in them and specific bright colors like on left bar of system windows such as settings do flicker like low fps.

      I only used the clover on the flash drive for now and i'd like if it's worth digging deeper of if i should just forget about it as it is a common nvidia problem on macOS.
      Would be amazing to know.
       
      Closer machine infos:
      * High Sierra (misses a recent minor patch as my network is veeeery slow and i got this nvidia issue anyway so i mainly jumped back to linux)
      * AMD fx8350
      * Asus Sabertooth 990fx Ref. 2.0
      * NVIDIA GeForce GTX 1060 6GB
       
    • By M3G4DR01D
      Hello everyone, I have an Asus gl502vmk (i7 kabylake + GTX 1060 6 gb) laptop and I tried all the patches/kexts to get the brightness with fn keys/touchpad (I2C ELAN 1200 works with VooDoo I2C kext v1.0 but no gestures/preference pane)/Keyboard backlight to work but no success so far, any help would be appreciated, thanks in advance.
      [EDIT] (10/04/2018)
      Battery status now works, thanks to @RehabMan turned out to be incorrect SMBIOS (used iMac instead of Mbp) lol, but it drains crazy fast (~1.5 - 2 hours while on standby (all apps quited!), on windows 10 it lasts 4 - 5 hours, and on linux it lasts 6 ~ 7 hours!)
      And with VoodooI2C v2.0.1 + VoodooI2CHID kext and patched DSDT, the touchpad is now detected in the sys pref pane but still no input.
      Sound works with VoodooHDA v2.9.1, but the only issue is that the jack sense isn't working (the output device doesn't auto switch to headphone when connected)
       
      [EDIT 2] (11/04/2018)
      The system brightness now works thanks to @onejay09 but I have no brightness slider, and there are 4 extra brightness levels (brightness stops increasing after 12 levels)  and the brightness keys are not mapped correctly, plus the brightness decreases when I plug in the ac adapter, then increases if I unplug it???, the brightness level isn't also saved after reboot.
      battery still drains crazy fast (~1.5 - 2 hours, even with brightness at 50%, so apparently it is a power management issue).
      and I also have shutdowns while in sleep mode (I tried darkwake=10 and darkwake-0 and darkwake=no)
       
      P.S. I have uploaded my new report files, thanks!
       
      Latest report files (11/04/2018): https://www95.zippyshare.com/v/AMOpP0AY/file.html
    • By hackintosh_builder
      Hello, I am interested in building a Hackintosh using Threadripper. Could you please recommend good motherboard(s)? Is there one that is fully compatible with the Hackintosh?
×