Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.

Sign in to follow this  

[AIUTO] Post-installazione Snow Leopard

3 posts in this topic

Recommended Posts

Salve a tutti, ho installato Snow Leopard 10.6.4 su un PC di un mio amico (Nawcom ModCD + iatkos s3 v2 + combo update 10.6.4). Prima di aggiornare alla 10.6.8 (già testata e funzionante) vorrei provare a far funzionare tutte le periferiche. Le uniche che mi creano problemi sono la scheda grafica, l'audio, le porte ps2 e la scheda di rete.


Prima di tutto vi allego il report di AIDA64. Download qui.

NOTA: il report indica che ho una ATI Radeon X1650 invece io l'ho sostituita con una ASUS NVidia GeForce 210 da 1 GB DD3


Di seguito un riassunto delle specifiche:


CPU: DualCore AMD Athlon 64 X2 4600+

RAM: 2024 MB DDR2 667MHz SDRAM

GPU: NVidia GeForce 210 1GB DD3

MOBO: Asus A8M2N-LA (NodusM3)

Audio: ALC888

Chipset: nVIDIA GeForce 6150


Qui sotto invece il mio org.chameleon.boot.plist:




<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com...yList-1.0.dtd">

<plist version="1.0">




<key>Instant Menu</key>











Ho l'SMBios.plis del mac pro 3,1.

Questi invece sono i kext che ho in /E/E:








Ho estratto anche il DSDT nel caso sia necessario modificarlo: Download qui.


E incominciamo con i problemi...


1) Audio: la mia ALC888 non viene rilevata, ho provato con AppleHDA modificati, VoodooHDA ma il massimo che mi viene rilevato è l'uscita della porta HDMI...


2) PS/2: non vengono rilevato... con cosa potrei sistemare?


3) Scheda grafica: ho acquistato la geforce 210 ritenendola compatibile (ho guardato qua: http://wiki.osx86pro....php/HCL_10.6.8) però non mi viene manco rilevata e ho la risoluzione fissa su 1024x768. Ho provato con GraphicsEnabler=Yes e a inserire la EFI String ma niente... Allego una foto delle info di sistema:










Come si può risolvere?


4) Scheda di rete: la scheda di rete lan integrata nella scheda madre viene rilevata nelle preferenze di sistema ma se attacco il cavo non succede nulla... come mai?


5) Alcune volte il boot si interrompe su 1 dei seguenti 2 punti... a cosa devo questo problema??










Ciao e grazie anticipatamente del vostro aiuto


PS: qualcuno potremme dirmi i giusti kext da installare per il sistema? Non sono molto sicuro di quelli che ho selezionato... Mi sono accorto che eseguendo il boot dal CD Nawcom non ho nessun problema non è che si potrebbe prendere i kext da li e "installarmeli" nel pc?

Share this post

Link to post
Share on other sites

Ho provato sia il kext dell'audio che la guida relativa alla scheda grafica ma nessuno dei due funziona...

Share this post

Link to post
Share on other sites
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoticons maximum are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By haegar33
      I have browsed thru all forums and all threads for this card but apparently my system is still something special. With some cumbersome effort (none of the simple one-click ##### and other USB-Installers methods ever worked for me) I managed to install Sierra 10.12.5. However when booting is nearly finsihed I get the famous black screen which can be recovered by quickly unplug/plug the DP monitor cable leading finally to a proper initialisation of my 290X. 

      1.) RadeoDeInit is on, without this patch the screens stays dark forever
      2.) Booting with iGFX never works for me, I always get memory allocation errors during boot until I disable the Intel graphics completely.
      3.) I am on Clover 4318, newer version do not make any differences.
      4.) I am using a System Configuration for an Imac 14,2. Most other configs do not make difference either.

      I have not started again the nightmare of Framebuffer patching (as I remember from Yosemite) and I think it will not help as the card is recognised by Sierra but just not initialised.
    • By TheBloke
      Hi all
      I currently use an NVidia 760 with four displays: 1 x 4K; 2 x 1920x1200; 1 x 1920x1080.   This mostly works, but I am considering replacing it with an AMD GPU - likely a Radeon 7970 - for two reasons:
      I would like to add a fifth monitor, maybe even a sixth; I get small stutters and slowdowns with my NVidia, using both Native and NVidiaWeb drivers.  It is a lot better than it was with my NVidia 980Ti, but it's still not perfectly smooth as it should be, especially when I have a full screen video playing while also doing UI movements like Swipe Left A Space or Mission Control.  
      I have just been told that it should be possible to access all display outputs on an AMD 79XX GPU, possibly requiring a custom SSDT and/or radeonDeInit?  I've only ever had one AMD GPU and that was 8 years ago so I am not experienced with them.  My NVidia 980Ti has five outputs, but can only use four at once.  But I believe AMD's EyeFinity does allow it to use them all as separate displays.
      Before I buy the GPU, I'd be most grateful if anyone could confirm that it should be possible to run five or six simultaneous displays on a card such as the ASUS HD 7970 DirectCU II (6 x DP outputs) or XFX AMD Radeon HD 7970 (2 x mini-DP; 1 x HDMI; 2 x DVI).  With one display being 4K @ 60fps and the rest 1920x1200 or 1080P.
      I have Googled on this a while but haven't yet found anyone discussing connecting more than four monitors to an AMD Hack  I did see that the late-2013 Mac Pro (which uses 2 x AMD FirePro GPUs) states it can support "up to 6 Thunderbolt displays".  So I know the OS can do it, it's just a question of whether a particular GPU can, and in a Hack setup.
      Thanks very much
    • By Angelo_
      Hi guys, i'm trying to help a friend of mine trying to install osx(possibly high sierra) on his pc with the following specs: 
      Amd fx8350 
      Asrock 990fx extreme 3
      8gb of fury Kingston ddr3 ram(2x4)
      Radeon hd 7950
      128gb ssd( crucial m550)
      A couple of hdds I don't remember the brand(maybe a seagate barracuda and a dumb old disk for data)
      We tried to install it using the regular clover+high showers installer but we couldn't get it to reach the installer, then we tried osx-amd(don't know if i can talk about it there, sorry if i can't) and we still couldn't get to the installer.
      Is there a guide i can use to install osx in that machin, i tried to search in the forum but i couldn't find it.
    • By hopoc
      Hi Guys,
      I’m stuck with 3mb VRAM, and can’t get my screen resolution! I’ve tried to reinstall 18 times with different configurations but I can’t seem to get it right! PLEEEEASE HELP I really don’t know what to do now. I've tried Enoch but still no success!
      System Model: HP EliteBook 8570p Processor: i7-3520M CPU @ 2.90GHz, 2901 Mhz, 2 Cores GPU:  AMD Radeon HD 7570M RAM: 12GB​

    • By macinsane
      What works? Everything. Sleep/Wake, NVMe, Airport, Spotlight, AMD-graphics

      ASUS Prime B250M-C µATX-board
      Intel Core i5 7500 (Kaby Lake)
      Gigabyte Radeon RX560 4GB
      Airport-compatible PCIe-Card for Wifi and Bluetooth (BCM943602CS)
      2 NVMe drives: Samsung P961 with 1 TB and 256 GB

      Installed mac OS: 10.13.2
      Clover: 4334
      *Update 10.13.3*
      Added new config.plist and ssdt for AMD injection (config_amd_ssdt_10133.zip). With this config and Intel IGPU activated you'll get Metal2 (macOS GPUFamily1 v3). What did I do? Had to fake Skylake graphics or to prevent apps like iMovie or FinalCut from crashing. With Kabylake kexts loaded and IGPU as secondary graphics card, the computer will hard reset whenever the Intel GPU is utilised. Only Skylake kexts and activated IGPU will give you working Metal2 for the RX560.  
      *Update 10.13.2*
      Since this update a new approach is advisable to get the RX560 up and running (works for 10.13.1 and GM as well). I've added a working SSDT and injector kext that gives you graphics and HDMI audio. Sleep works fine too if you add the DSDT I compiled.  
      Credits go to @Toledo @Mork vom Ork and @Mieze because their work made this possible.
      *Update* I've added NEW config.plist and DSDT. For proper graphics power management you have to activate onboard graphics in BIOS but make PCIE the primary display. Furthermore you have to inject ig-platform-id 0x59120003 and let Clover patch GFX0 to IGPU. This is the only way to avoid crashes of iMovie, FinalCut or slowdowns after video playback.

      This may be the smoothest Hackintosh of my life. It is easier than Sierra install due to native support for most of the used hardware in High Sierra. Not much to do, using an up-to-date Clover version like 4184. Make sure you have apfs.efi in /Clover/drivers64UEFI/ on your EFI partition and that you delete EmuVariableUEFi.efi (downside: iMessage doesn't work without it). Somehow Rehabman's SSDT in /Clover/ACPI/patched helps avoiding crashes in iTunes.

      Needed kexts (on your EFI into /Clover/kexts/Other): FakeSMC, IntelMausiEthernet for ethernet, USBInjectAll and XHCI-200-series-injector for USB, Lilu and AppleALC for audio, Whatevergreen for AMD graphics, IntelGraphicsFixup and AMD9xxxControllerPatcher.kext.
      DSDT and SSDT go into EFI/Clover/ACPI/patched.