Jump to content

i7-2700K unsupported ?


4 posts in this topic

Recommended Posts

Hi there,

 

i'm working on a new build...

 

GA-Z68X-UD3H-B3 rev1.3 / F11

i7-2700K

16GB G.Skill 1333MHz

nvidia 8800gt ( still using HD3000 for installation)

 

using USB bootstick with Cv2.1svn (r1913) , iMac12.1/12.2 in SystemProfiler with or without NullCPU.kext iget KP

 

panic (cpu 0 caller 0xfffff7f8066293f) unsupported CPU: family =0x6, model =0x2a, stepping =0x7"@/SourceCache/AppleIntelCPUPowerManagement -90/pmProcessor .c:210

 

( I have no camera here, so i can't take any pics... :wallbash: )

 

AFAIK the 2600K and 2700K are the same family. I checked mine with CPU-Z and googled the same for an 2600K.

I can't find any differences except for the 100MHz that the 2700K is running faster.

 

Any hints on how i can get this to work are highly appreciated.

 

I can attach all dumps and sys-info if needed

 

thanks

Link to comment
Share on other sites

Just a thought, not sure what version of SL your installing, but double check that nullCPU and fakeSMC versions are compatible and IIRC only 10.6.8+ have native Sandy Bridge support

Link to comment
Share on other sites

Sorry for the misleading infi before, i allready installed 10.6.8 on a spare HDD

 

found matching FakeSMC & NullCPU...

 

Now NullCPU loads but followed by KP with

 

panic (cpu 0 caller 0xffffff80002cd439): "commpage no match for last, next address ffff1780"@/sourceCache/xnu/xnu-1456.1.25osfmk/i386/commpage .c;324

 

:|

Link to comment
Share on other sites

any overclock on the cpu? any different with -x or can u at least get into single user mode without kp? maybe try without nullcpu while using patched dsdt and good smbios. I only ever use it during first install. Here's a DSDT if you still need one for you board. for F10 biios, should work fine on F11 though. don't ask where it came from

DSDT-GA-Z68X-UD3H-B3-F10.aml.zip

Link to comment
Share on other sites

 Share

×
×
  • Create New...