Help me please :)

[ditivlore]

Hello everybody !!

I am Albanian so please forgive me for my english

This is my first post so be gentle on me if I have posted it in the wrong category

I am a windows user and I want to convert my PC to a Mac OS X system. Can someone giude me step by step. I have read all the giudes that says that we have to use a USB 8gb and a Mac os x system to make it bootable.

I dont have a mac system to make it bootable so please help me to turn in a Mac user.

 

I have only have this system reqiurements to start the giude :(

 

Motherboard : Asus M3N78-VM

CPU : AMD Athlon II 2.9 GHZ X3 435

RAM : 3GB DDR2 (800 mhz)

GPU : Nvidia 8200 m (Upgrated to Nvidia 440 GT )

OS : Windows 7 ( can install 32 bit and 64 bit )

SATA HDD 320 GB + 120 GB IDE

 

I got a Flash drive 2Gb

DVD - RW

 

And olso i have attached my system informations.

 

Please help me

Thanks in advance.

DxDiag.txt

[Foxic]

You need to start off with a 10.6.3 Snow Leopard retail disk and Nawcoms ModCD.

[Acro_Design]

firstly you will need an instalation method, i highly recomend using newcoms mod cd as it installs the basic drivers (known as kexts in osx) at the same time and uses auto detection so you dont need to do as much.

 

i recomend you buy a retail version of osx 10.6.x or snow leopard as its known. this combined with the mod cd should make your life a bit easier.

 

once you have booted into the installer post again and i will get back to you. also google has the basics.

 

Edit

spoken like a FAQ pro

[ditivlore]

You need to start off with a 10.6.3 Snow Leopard retail disk and Nawcoms ModCD.

 

So , I have to download a retail DVD from apple or a distro like iAtkos. What are you seggesting to me ?

I have to firstly insert a newcoms mod cd then when it asks I have to insert this retail DVD 10.6.3 right ?

I am asking becouse I have done this one time , mac os x was installed and when restarting it says kernel panic

can you please giude me step by step

 

Please buddy

 

PS : can I upgrade to Lion than ?

[Acro_Design]

ok so you will need to buy a retail snow leopard disk from ebay as apple store do not sell them anymore.

 

i do not use distros personally and cannot guide you with a distro.

 

when the mod cd boots up you will then eject the disk and insert the retail snow leopard disk. then press f5 to refresh. you will then select the osx install disk when it appers.

 

follow the instructions on screen (press any key)

 

this will now boot into osx installer.

 

before pressing continue to instal you must use disk utility in the installer menu to create a partition this should be HFS+ journaled and you could name it OSX, now close the disk utility that should allow you to select a disk to install.

 

now continue to install. this takes around 30mins and you must keep moving the mouse every 5 mins or it will stall, stalling makes it take longer.

 

now it will reboot itself.

 

if you get a KP then -v at the bootloader menu to see the error and begin the research. i can assist you when you are at that stage.

 

unfortunately AMD cannot run lion at all at the moment.