graphic Design Posted September 6, 2006 Author Share Posted September 6, 2006 Hi, in Appple disk util, you can see a sata hd? in system bios you have raid abilited? if yes, try disable this option in system bios. my mobo a intel d865perl ich5, in bios is raid disable, and work, try this and report. WOW... I tried to disable SATA Raid and Now MAC can detect my SATA and work fine! Like this: Maxtor 6Y120M0: Capacity: 111.76 GB Model: Maxtor 6Y120M0 Revision: YAR51EW0 Serial Number: Y3KWEPLE Removable Media: No Detachable Drive: No BSD Name: disk1 Protocol: ata Unit Number: 0 Socket Type: Serial-ATA OS9 Drivers: No S.M.A.R.T. status: Not Supported Volumes: Untitled: Capacity: 9.77 GB Available: 2.65 GB Writable: No File System: NTFS BSD Name: disk1s1 Mount Point: /Volumes/Untitled DATA: Capacity: 101.99 GB Available: 3.68 GB Writable: No File System: NTFS BSD Name: disk1s2 Mount Point: /Volumes/DATA So...that mean now my SATA become IDE, right? One problem: I cannot login to my Windows XP SP2, everytime try to boot to Windows, it autorestart before the welcome screen display! Now MAC can read SATA, okie, but I can't login to my Windows any more! How can I dualboot from Mac HDD to Windows? Thank you very much! Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-182601 Share on other sites More sharing options...
gu3d3s Posted September 7, 2006 Share Posted September 7, 2006 Hi, good news!, lets go a 2# problem, try boot in XP in safe mode or restore a system from previus date. verify is all files for windows boot is present into HD, and is all this no solve a problem, re-install a xp, but dont format yor xp HD, install over a old XP install. your sound card works fine? you have a mic in working? []'s guedes jr Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-183310 Share on other sites More sharing options...
graphic Design Posted September 7, 2006 Author Share Posted September 7, 2006 Thanks for all your help but now I can not boot to Windows XP even in safe mode! Maybe reinstall Windows is the good choice! But I really afraid to do that because I have no time to reinstall Windows and any software with... No ways anymore? My sound onboard AC97 work fine but only strereo! I dont know how to get 5.1 sound surround! I never try a mic to see it working or not. I will try later! Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-183406 Share on other sites More sharing options...
lilpacbe Posted September 7, 2006 Share Posted September 7, 2006 well i have got the same problem. i have the "medion md8809". osx86 boots fine , until i have to choose the location, there it finds the dvd-drive only . i have tried to format the (3th) partition like: Fat32 primary and Fat32 logical.. but nothing works. In bios sata mode is sett on : IDE ( the other choise is "RAID", wich also doesn't work) Can someone help me out with this one?? Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-183411 Share on other sites More sharing options...
sodoi Posted September 7, 2006 Share Posted September 7, 2006 my hd si sata2,now can't install osx, i will by a IDE HD,and than try to install osx on my PC Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-183447 Share on other sites More sharing options...
dexthageek Posted September 8, 2006 Share Posted September 8, 2006 dont reinstall windows, there is nothing wrong with your Windows Installation. It has to due with the HDD Driver windows is attempting to use. If your system didnt restart you would see a BSOD that said Unaccessible Boot Device. If you want to get back into windows you need to change your IDE/SATA settings to their previous setting and windows will work. I have the same problem. If want to see my SATA (NTFS Drive) in OSX I have to disable some of the SATA features in my bios, however this causes WinXP to choke so to boot into windows I need to revert to previous HDD SATA/IDE settings. The best thing to do to share files between both OSX and Windows is to install another IDE drive (or USB/Firewire Externel) in your machine and format it to FAT32 allowing both operating systems to read and write to the drive. I hope that helps. DeX Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-184432 Share on other sites More sharing options...
graphic Design Posted September 9, 2006 Author Share Posted September 9, 2006 Thanks for your help! So, We dont have any SATA patch dor this problem, rite? Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-184719 Share on other sites More sharing options...
dexthageek Posted September 9, 2006 Share Posted September 9, 2006 There are some SATA Patches out there but try this first. Set SATA to IDE Mode Note: This will cause windows to fail, but you will have read access to your SATA drives in OSX. Then to boot back into windows set SATA back to your original setting my original setting is AHCI. DeX Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-184746 Share on other sites More sharing options...
graphic Design Posted September 10, 2006 Author Share Posted September 10, 2006 There are some SATA Patches out there but try this first. Set SATA to IDE Mode Note: This will cause windows to fail, but you will have read access to your SATA drives in OSX. Then to boot back into windows set SATA back to your original setting my original setting is AHCI. DeX I tried but it not work! Where to set the config is AHCI? Sorry, I'm not so good to use computer! Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-185378 Share on other sites More sharing options...
AMDZen Posted September 10, 2006 Share Posted September 10, 2006 There are some SATA Patches out there but try this first. Set SATA to IDE Mode Note: This will cause windows to fail, but you will have read access to your SATA drives in OSX. Then to boot back into windows set SATA back to your original setting my original setting is AHCI. DeX Where can I find these SATA patches you speak of? Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-185560 Share on other sites More sharing options...
graphic Design Posted September 11, 2006 Author Share Posted September 11, 2006 Where can I find these SATA patches you speak of? Yup... I thing, should have!!!!! Link to comment https://www.insanelymac.com/forum/topic/25838-how-can-i-make-the-mac-osx-jas-1047-see-and-read-my-sata-harddisk/page/2/#findComment-185837 Share on other sites More sharing options...
Recommended Posts