scrax Posted February 28, 2011 Share Posted February 28, 2011 Ciao ragazzi, ho scoperta da pochi giorni questo bootloader del 2009 che sembra molto più preciso di chameleon nel emulare l' EFI Purtroppo non riesco a farlo partire finora le versioni da me provate o si bloccan all'avvio con un messaggio MBR Start! o caricano i kext di SnowLeo o Leopard e poi più nulla Qui le ultime versioni che ho trovato: http://www.mediafire.com/?36li23ag42y9s Per installarlo serve Windows anche da virtual machine funge (quando troverò una procedura funzionante la posterò) C'è qualcuno che può tradurre questo, mi pare sia portoghese: Para instalar Formatar uma pen USB no windows em fat32 - o melhor é usar a HP USB Disk Storage Format Tool -> http://www.mediafire.com/?sharekey=a538689...95965eaa7bc68bc abrir uma consola de Ms-Dos em modo de administrador, no caso do Windows Vista ou 7. navegar até às pasta bootsector e correr o ficheiro makeusb.bat desta forma: c:\bootsector\makeusb.bat e: e: -> é a letra da minha pen em Ms-Dos. verifiquem qual é a vossa antes de inserir o comando. o processo correr e, se tudo correr bem, vai dar sucesso em todas as tarefas. Desmontem e voltem a montar a pen. Se o nome mudou para EFI, então está tudo ok. se não, tentem de novo. criem um sistema de ficheiros e directorias como o que está no exemplo, se preferirem podem mesmo despejá-lo para dentro da Pen e reiniciem por ela. Rezem.. se resultou, parabéns, coloquem no OSX86Tuga as vossa experiência. Se não, estamos a trabalhar para que resulte sempre... e coloquem no OSX86Tuga as vossa experiência. Questo quello che ho capito io più o meno a "orecchio" e con google translate: Per Installare [DA WINDOWS] Formattare una penna USB in win FAT32 (meglio usare HP USB Disk Storage Tool) aprire console MS-Dos (cmd) in modalità amministratore se con Vista o 7 navigare fino alla cartella di XPC "bootsector" e avviare l'installer makeusb.bat con questo codice (ipotizzando di avere la cartella bootsector in C: e la chiavetta USB vista come E:): c:\bootsector\makeusb.bat e: <indirzzo cartella bootsector>\makeusb.bat <lettera unità USB> e: è la lettera della mia penna USB controllate la vostra prima di inserire il comando Creiamo poi un sistema di cartelle come quello nell'esempio il processo in esecuzione e se tutto va bene, darà il successo in tutte le attività. Smontare e rimontare la penna. Se il nome è stato cambiato in EFI, allora tutto è ok. in caso contrario, provare di nuovo. creare un sistema di file e cartelle come quello nell'esempio, (se si desidera si può anche scaricare nella penna) <- Google translate ?? e riavviarlo. Prega .. essa ha portato, congratulazioni, il tuo posto sull'esperienza OSX86Tuga. <- Google translate ?? In caso contrario, stiamo lavorando su tale risultato quando ... e mettere in OSX86Tuga tua esperienza. <- Google translate ?? Il file proviene da uno dei pacchetti di xpc contenuti nel link postato in cima Forza ragazzi diamoci sotto che questo bootloader è essenziale per il futuro dei nostri hack Link to comment Share on other sites More sharing options...
mrmojorisin17 Posted February 28, 2011 Share Posted February 28, 2011 Appena avrò l'hack sotto mano lo testerò sicuramente (già l'avevo scaricato) Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 ciao scrax ok,la mia chiavetta si chiama EFI FAT32 però non mi è chiaro un passaggio Creiamo poi un sistema di cartelle come quello nell'esempio eh?? Link to comment Share on other sites More sharing options...
mrmojorisin17 Posted February 28, 2011 Share Posted February 28, 2011 Se può esserti utile: Features setup: All the custom files must be in the root of USB key. DSDT: XPC will load dsdt.aml Dev properties: paste your string (hex) in plain text format file and rename it to "dev-props.dat" Extra kext: copy your custom kexts to a folder named "extra_kext" Kext exclusion: create a plain text format file and rename it to kext-exclude.dat. please the current syntax : "CFBundleExecutable CR/LF" (i.e AppleIntelCPUPowerManagement CR/LF) You can use (but you should not!) wildcards '*' and '?'. If you type i.e. Apple*, all kext names that starts with 'Apple' will be skipped on load. (for *: the remaining characters are equal / for ?: that character is equal) Era in un rar scaricato. Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 così,non da MBR start però rimane schermo nero senza ne cursori ne niente almeno è cambiato qualcosa EDIT:ho anche sostituito il DSDT con il mio ma niente EDIT2: con laversione xpc_efi_boot_12_04_2010.zip mi dice ABCE EnterDFxelpl ma non mi fa fare niente mmmmm Link to comment Share on other sites More sharing options...
scrax Posted February 28, 2011 Author Share Posted February 28, 2011 provato con il tasto m ? da qualche parte ho letto che serve per entrare nel Machine control o na cosa simile... ho preparato una chiavetta con l'ultimo anch'io mo vedo... EDIT: avviato con l'ultimo, ma arriva una schermata grigia, li cliccando m posso riempire le info smbios con ' cambia risoluzione e con v si possono immettere le boot flag r resetta il sistema e reboota OCCHIO! la schermata dovrebbe visualizzarmi le icone degli hd ma non lo fa con invio la schermata lampeggia (nessunkernel sul disco invisibile che abbiam selezionato) mi sposto di uno con la freccia dx poi invio ancora niente terza posizione freccia a dx e invio mi parte il kernel e poi KP 10.6.6 quarta parte il kernel e poi si blocca 10.6.0 Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 provo con il tasto M EDIT: nulla.....come sopra Link to comment Share on other sites More sharing options...
Marchrius Posted February 28, 2011 Share Posted February 28, 2011 Io l'ho appena messo sulla mia pennina formattata in FAT32 con HP Utity. Arrivo alla schermata in cui devo selezionare l'OSX. Seleziono SL e inizia a leggere Extensions.mkext... Vi posto uno screen per spiegarmi meglio... Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 se riesci,posta anche il pacchetto utilizzato e se puoi lascia come sono dosposte le cartelle (il contenuto della chiavetta) Link to comment Share on other sites More sharing options...
Marchrius Posted February 28, 2011 Share Posted February 28, 2011 Per gli screen ho problemi con il cell... Ho preparato la penna formattandola con l'utility hp e con cmd(windows quindi): makeusb.bat %letteraPenDrive% L'archivio è la root della mia pendrive. Il pacchetto completo che ho scaricato e utilizzato è Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 ti ringrazio tanto provato tutto ma ancora MBR Start! Link to comment Share on other sites More sharing options...
Marchrius Posted February 28, 2011 Share Posted February 28, 2011 Questi gli screen: A te si blocca a MBR Start? Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 si si esatto,ancora prima di tutto quel ben di Dio Link to comment Share on other sites More sharing options...
Marchrius Posted February 28, 2011 Share Posted February 28, 2011 si si esatto,ancora prima di tutto quel ben di Dio Provato ad eliminare settings.bin? Forse i settaggi non vanno bene... Sicuramente ne crea uno predefinito... Link to comment Share on other sites More sharing options...
Mela quadrata Posted February 28, 2011 Share Posted February 28, 2011 si si esatto,ancora prima di tutto quel ben di Dio provato a fare tutto da Windows e da CMD? Perchè anche a me con l'installer di Scrax si blocca, mentre quando feci il tentativo da windows compariva "il ben di dio"... You will need to format the USB key to FAT32 file system. In order to prevent file system failure we recommend you to use HP USB UTILITY in order to prepare the media. Once formated to FAT32, please use the bootsector.rar package tools. Unrar the archive, open CMD an then navigate to the folder were it's been extracted. Execute this command : makeusb drive_letter (i.e. makeusb g:) Once makeusb script successfully executed please unplug and re-plug the USB key. You are now ready to copy the EPROM image file (Efildr20) to the root of the key. Your done ! you can now test XPC by booting on the USB key. Link to comment Share on other sites More sharing options...
pipposanta Posted February 28, 2011 Share Posted February 28, 2011 Ciao, per chi è in difficoltà con XPC... un suggerimento... provate ad eliminare la cache delle estensioni che si trova in /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext... Verranno ricreate automaticamente al successivo riavvio. Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 Provato ad eliminare settings.bin? Forse i settaggi non vanno bene... Sicuramente ne crea uno predefinito... provo subito provato a fare tutto da Windows e da CMD? Perchè anche a me con l'installer di Scrax si blocca, mentre quando feci il tentativo da windows compariva "il ben di dio"... si,esattamante da cmd EDIT: ok,arrivo al rEFIt e selezionata la partizione OSX rimane su Starting boot.efi procediamo procediamo Link to comment Share on other sites More sharing options...
David23 Posted February 28, 2011 Share Posted February 28, 2011 ti ringrazio tanto provato tutto ma ancora MBR Start! anche a me da la stessa cosa, ma mi son perso un passaggio, dov'è Efildr20??? EDIT: trovato, adesso riprovo Link to comment Share on other sites More sharing options...
Marchrius Posted February 28, 2011 Share Posted February 28, 2011 Eliminata la cache da /S/L/C ecc ecc ma rimane piantato... Link to comment Share on other sites More sharing options...
mrmojorisin17 Posted February 28, 2011 Share Posted February 28, 2011 Forum internazionale: utente blade5502 Success with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]! Had success with [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] bootloader (mitch_de postet link) 1)Install [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] to USB flash Download DuetToHDD (DL Link: http://rapidshare.com/files/450282999/DuetToHdd.zip) Run Terminal, pull DuetToHdd into Terminal space Wirite /dev/rdiskXsY //where X and Y points to your USB Stick! space pull Efildr20 from mitch_de's link into Terminal copy efi folder and Efildr20 from mitch_de's link to your USB Stick copy DSDT to its folder in efi dir 2) Mount 10.7 image in Terminal: open /Volumes/Mac\ OS\ X\ Install\ ESD/BaseSystem.dmg 3) Restore “Mac OS X Base System” to a partition (diskutility) //You should have 2 free Partitions: 1 for Installation Files ond another for the System should be installed. 5)Remove “Packages” alias from System/Installation on that partition 6)in Terminal: cp -R /Volumes/Mac\ OS\ X\ Install\ ESD/Packages /Volumes/Mac\ OS\ X\ Base\ System/System/Installation 7)Reboot, start [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] from USB Stick, press M, enter following data: //Resolution can be changed with U and D!!! Board Serial: Mac-F4208DA9 Kernel Arguments: -v -s You can add arch=i386 or arch=x86_64 Choose installer partition, hit Enter In singleuser mode: mount_hfs /dev/diskXsY /tmp, where diskXsY – partition that has fakesmc.kext chown -R root:wheel /tmp/fakesmc.kext kextload /tmp/fakesmc.kext umount /tmp exit Install Lion After reboot start your SL and make this changes on the drive where Lion where installed: Rename or delete this file: /System/Library/CoreServices/PlatformSupport.plist Reboot and start from USB Choose Lion and do the same as before in Singleuser mode After this first boot install fakesmc with kext utility! Lion: http://img36.imageshack.us/i/ohnetitelr.png/ My Hardware: MSI X58 Pro-E i7 920 NVIDIA GTX 285 Good Luck! Link to comment Share on other sites More sharing options...
Marchrius Posted February 28, 2011 Share Posted February 28, 2011 Scusate l'OT ma voi Lion da dove l'avete scaricato? Fiumi e torrenti? Link diretti? P2P? Io da torrent ma la mia immagine pesa appena 3 GB... :S Link to comment Share on other sites More sharing options...
Alex//3oo1 Posted February 28, 2011 Share Posted February 28, 2011 Forum internazionale: utente blade5502 vista Scusate l'OT ma voi Lion da dove l'avete scaricato? Fiumi e torrenti? Link diretti? P2P? Io da torrent ma la mia immagine pesa appena 3 GB... :S non dico dove ma dico solo che è 3,59GB Link to comment Share on other sites More sharing options...
Marchrius Posted February 28, 2011 Share Posted February 28, 2011 vista non dico dove ma dico solo che è 3,59GB Un piccolo indizio giusto per farmi capire? Non dico il nome completo! Link to comment Share on other sites More sharing options...
Maxetto Posted February 28, 2011 Share Posted February 28, 2011 Forum internazionale: utente blade5502 l'ho visto, ma il mio problema non è il Bootloader che parte senza problemi, ma MAC che si blocca su una stringa di cui ho postato un immagine nel topic Apple Lion the project Link to comment Share on other sites More sharing options...
scrax Posted February 28, 2011 Author Share Posted February 28, 2011 Qua si parlo di PCX e VERSIONI RETAIL no Lion please. Sta avviando con una combo di vari file dai pacchetti che ho trovato ma non vedo le icone ora provo con quelli che hai postato tu... Link to comment Share on other sites More sharing options...
Recommended Posts