.neK Posted June 15, 2010 Share Posted June 15, 2010 Thank you for helping me out so much. Appreciate it, I have it working except for selecting my native resolution. My monitor is a 19inch wide and on windows I use 1440 by 900. But on this SL for my resolution change, theres no option for my native. Any help on that? Thanks. EDIT: Had a look at the bios thing in video info. Doesn't even show my native resolution... Im using an ACER19inch wide. Sighs... Link to comment Share on other sites More sharing options...
MaLd0n Posted June 15, 2010 Share Posted June 15, 2010 the acceleration is enabled? you can open the frontrow? use the driver package, use the arch=i386 install the "drivers" and then the "framebuffer", if not activate, use the "exotics" in accordance with their system if the screen goes jumping, use the natitpowerplay Link to comment Share on other sites More sharing options...
.neK Posted June 16, 2010 Share Posted June 16, 2010 yeah everything works graphics wise and acceleration thanks to your help I can change my resolution and there's a lot of options. But none of them are my native resolution. I've researched a lot on google, and I think it has to do with my monitor. It's an old acer 19inch widescreen. Like 4 years old now or so. So yeah.... Thank you anyway. Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2010 Share Posted June 16, 2010 OK good luck in trying to unravel this mystery Link to comment Share on other sites More sharing options...
Raffaell Posted June 16, 2010 Share Posted June 16, 2010 I have 1 more question, why the fonts looks a bit jaggy ya ? Link to comment Share on other sites More sharing options...
Ario Seno Posted June 16, 2010 Share Posted June 16, 2010 -----------------------------------------c drivers + framebuffer+exotics if you need to use the natitpowerplay only 32 bits ------------------------------------------- 64 bit graphicenabler=yes / pciroot + legacyati4800controlller -------------------------------------------- I use 32 because I have no problems with it 64 have some problems it says 4850, but it works in 4870 "There is 3 device types hardcoded in file – radeon hd 4870 (used also for 4830 and 4850)" hi MalDon I followed your instruction using package from megaupload. i'm using 4850 saphire. modified Boot.plist, installed no 1 and no 2 then restart -x but what i get is blank screen, then the monitor ask for analog or digital input any suggestion, i haven't come into applying no3 Link to comment Share on other sites More sharing options...
kerr Posted June 16, 2010 Share Posted June 16, 2010 Hi, Nothing changed, I copy all the Boot.list and restart, I cant get the resolution... Any Help ? Add your graphic card's ID in Info.plist of ATI4800Controller.kext Link to comment Share on other sites More sharing options...
MaLd0n Posted June 16, 2010 Share Posted June 16, 2010 hi MalDonI followed your instruction using package from megaupload. i'm using 4850 saphire. modified Boot.plist, installed no 1 and no 2 then restart -x but what i get is blank screen, then the monitor ask for analog or digital input any suggestion, i haven't come into applying no3 use arch=i386 no -x if you want to use 64-bit ... graphicsenabler=yes / pciroot + legacyati4800controller.kext Link to comment Share on other sites More sharing options...
Ario Seno Posted June 17, 2010 Share Posted June 17, 2010 use arch=i386 no -x if you want to use 64-bit ... graphicsenabler=yes / pciroot + legacyati4800controller.kext hi MaldOn i want to do fresh install(again) installation: usb method, from 10.6.0 upgrade ke 10.6.2 using chameleon boot loader, PC EFI 4, my gpu is ati radeon saphire 4850 i've tried almost all the successful methodes which is posting in this forum for the GPU. but none of them is works for me - black- and white screen can you help providing the best guidence thanks before Link to comment Share on other sites More sharing options...
MaLd0n Posted June 18, 2010 Share Posted June 18, 2010 hi MaldOn i want to do fresh install(again) installation: usb method, from 10.6.0 upgrade ke 10.6.2 using chameleon boot loader, PC EFI 4, my gpu is ati radeon saphire 4850 i've tried almost all the successful methodes which is posting in this forum for the GPU. but none of them is works for me - black- and white screen can you help providing the best guidence thanks before 32 BIT http://www.megaupload.com/?d=W242MOW0 1- install radeon_hd_48x0_drivers-2.pkg 2- install Patched framebuffers for 48x0 and 3870 3- if not enable qe / ci, use exotics 4- if you need to use the natitpowerplay(BUG SCREEN JUMPING) only 32 bits arch=i386 64 BIT 1- use the kext legacyati4800controller.kex (E/E or S/L/E) http://www.insanelymac.com/forum/index.php...st&id=59328 2- Graphicsenabler Use Lizard http://dl.dropbox.com/u/1034555/lizard/Lizard-custom.zip 2a-Auto detect value 2b-GraphicsInjection 2c-save REBOOT this is added in boot.plist Link to comment Share on other sites More sharing options...
Ario Seno Posted June 29, 2010 Share Posted June 29, 2010 32 BIT http://www.megaupload.com/?d=W242MOW0 1- install radeon_hd_48x0_drivers-2.pkg 2- install Patched framebuffers for 48x0 and 3870 3- if not enable qe / ci, use exotics 4- if you need to use the natitpowerplay(BUG SCREEN JUMPING) only 32 bits arch=i386 64 BIT 1- use the kext legacyati4800controller.kex (E/E or S/L/E) http://www.insanelymac.com/forum/index.php...st&id=59328 2- Graphicsenabler Use Lizard http://dl.dropbox.com/u/1034555/lizard/Lizard-custom.zip 2a-Auto detect value 2b-GraphicsInjection 2c-save REBOOT this is added in boot.plist I Maldon it's working, finally my ATI4850 is working using your method for 64 bit many thanks for your help Link to comment Share on other sites More sharing options...
MaLd0n Posted June 30, 2010 Share Posted June 30, 2010 GREAT Link to comment Share on other sites More sharing options...
maleorderbride Posted June 30, 2010 Share Posted June 30, 2010 I was unable to use FCP (VRAM error) after installing 10.6.4 on my HD4870 1GB hackintosh. I downloaded Netkas' PC EFI 10.6 boot file and swapped it in. Previously I was using a Chameleon based boot loader. Everything works again now. So, don't go swapping system files. Just install PC EFI 10.6 until Chameleon figures out what the bug in their code is. I attached it since Netkas's mirror seems to be down. I am still having to use a dongle to see my desktop as otherwise I get a black screen. 10.6.4_HD4870_Boot_File.zip Link to comment Share on other sites More sharing options...
Recommended Posts