Jump to content

10.6.x by Hazard kernel panic help

L14M333

By L14M333,
in OSx86 10.6 (Snow Leopard)

 Share
13 posts in this topic

Recommended Posts

L14M333
L14M333
Posted
Posted

Hello, ive downloaded the distro of 10.6.2 by Hazard,

 

tried installing it on two machines Acer TravelMate 8210

 

and my friends one (acer something)

 

 

but no luck, i know what im doing with hackintoshes but with this distro even if i select NOTHING other than boot loader i get a kernel panic :S

 

they both have SSE3 intel dual core processors (not sure of other specs)

 

but i'd really like this to work so i can have my iMac and Hackbook together,

 

any ideas?

 

Thanks

 

Liam

Link to comment
Share on other sites
L14M333
L14M333
Posted
  • Author
Posted
What does the kernel panic say?

 

 

ooo, alot lol... i have to reinstall for a pic (gimme 30 mins)

 

but i hear its quite common,

 

the only possible bit of help i have found is this

I have solved the problem chaning on extra folder of the installation disk the .plis MacPro4,1 for Macpro3,1. It worked.

 

i have the iso open in magic iso atm and i cant find nothing?

 

as i said give me about 30-40 mins for pic

 

Liam

Link to comment
Share on other sites
L14M333
L14M333
Posted
  • Author
Posted
An ISO is read only anyway so there's not much point changing it. I also doubt that changing the Mac model actually fixes a kernel panic.

Waiting for your photo. :)

 

iPhone camera = {censored} lol.. typing it up now bun it the last lines it says:

 

 

Darwin Kernel version 10.0.0: Fri July 321 22:46:25 PDT 2009; root:xnu-1456.1.25~1/RELEASE_X86_64
System model name: MacPro4,1

System uptime in nanoseconds 2289517939

 

 

will post the rest in a min but thats the bit what made me think it will work changing it,

 

Liam

Link to comment
Share on other sites
L14M333
L14M333
Posted
  • Author
Posted

Whole log:

MAC Framework successfully initalized
using 10485 buffer headers and 4096 cluster IO buffer headers
IOAPIC: version 0x20 Vectors 64:87
ACPI: system state [S0 S3 S4 S5] (S3)
DEBUG yenta bus id 11 is being used twice
DEBUG found free bus range at 12
IOPCI2PCIBridge: cardbus memory range 524288 bytes @ 0xb0504000
IOPCI2PCIBridge: cardbus I/O range 8192 bytes at 0x0000f000
Firewire (OHCI): Start - unable to get device memory
panic(cpu 0 caller 0xffffff80002cbf74): Kernel trap at 0xffffff7f80794f93, Type 14=Page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0x00000000e00002bc, RBX: 0xffffff8006545000, RCX: 0x0000000000000000, RDX: 0xffffff80068c7180
RSP: 0xffffff803599bd60, RBP: 0xffffff803599bd70, RSI: 0x0000000000000001, RDI: 0x000000000000000
R8: 0x000000000000002 R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0xffffff80004fc3b6
R12: 0x00000000e00002bc, R13: 0xffffff80068adf00, R14:0x0000000000000000, R15: 0xffffff7f8078ffa0
RFL: 0x00000000000010282, RIP: 0xffffff7f80794f93, CS: 0x0000000000000008, SS: 0x0000000000000080
Error code: 0x0000000000000000

Debugger Called: <panic>
Backtrace (CPU 0), Frame : REturn Address
0xffffff803599ba00 : 0xffffff8000204ae6
0xffffff803599bb00 : 0xffffff80002cbf74
0xffffff803599bc50 : 0xffffff80002ddd4a
0xffffff803599bc60 : 0xffffff7f80794f93
0xffffff803599bd70 : 0xffffff7f807999fd
0xffffff803599bdf0 : 0xffffff8000522e60
0xffffff803599be40 : 0xffffff800052356b
0xffffff803599bee4 : 0xffffff80005238d9
0xffffff803599bf40 : 0xffffff8000523ac4
0xffffff803599bfa0 : 0xffffff80002c3eb7
		Kernel Extensions in backtrace (with dependencies):
			com.apple.drive.AppleFWOHCI(4.3.4)@0xffffff7f80792000->0xffffff7f807b9fff
				   dependency: com.apple.iokit.IOFireWireFamily(4.1.7)@0xffffff7f80747000
				   dependency: com.apple.iokit.IOPCIFamily(2.6.3)@0xffffff7f80604000

BSD process name corresponding to current thread: kernel_task

Mac OS Version:
Not yet set

Kernel Version:
Darwin Kernel version 10.0.0: Fri July 321 22:46:25 PDT 2009; root:xnu-1456.1.25~1/RELEASE_X86_64
System model name: MacPro4,1

System uptime in nanoseconds 2289517939

 

 

 

BLOODY HELL that was alot of typing lol... please make it usefull :D

 

Liam

Link to comment
Share on other sites
L14M333
L14M333
Posted
  • Author
Posted
Can you boot using arch=i386?

 

If not, try to disable Firewire in the BIOS.

 

 

arch=i386 dont work :rolleyes:

 

crappy phoenix bios gives no options for disabling bios :angel:

 

looks like theres no hope for this, downloading another copy of iatkios v7 what ive used before and i KNOW it works.

 

Thanks

 

Liam

Link to comment
Share on other sites
  • 1 month later...
Marley05
Marley05
Posted
Posted

hi their its my first post so please go ez on me (lol) and yes im a TOTAL NOOB!

 

 

 

ok i did a little research on how to do this only bad thing my first reserach was done on youtube, maybe this is where i went wrong to start with? anyway iv D/L hazards 10.6.2 and tryed to install it but after install when its time to boot up my pc shuts down (not even a restart????) but it installed without a hitch from what i can tell

 

(i dont really get to see what the error is before it shuts it self off coz its so quick ;) )

 

something about firewire at the end of line from i could tell

 

hears my setup anyway:

 

Cpu: Q9550 2.83

 

MoBo: P5Q Pro

 

Display: Radeon hd 4650 - (i did find some driver or kext for this but i dont have a clue on how to install it)

 

Ram: 8500cs 6gb

 

Hdd: 1/ Samsung hd103uj 1tb 2/ Maxtor ST31000340as 1tb - iv got partitons on both drives 500gb (that was under my xp and windows 7 install, witch i reformatted the win7 to install osx86 hazard on just to let u know)

 

 

 

also i done a safe mode start and this is what i got:

 

 

 

 

 

Kext sk.triaxis.kext.sleepenabler failed to load (0xdc00800e).

failded to load kext sk.traixis. kext.sleepenabler (error 0xdc00800e).

NullCPUPowerManagement::init: Properties= 0xa4588c0

Couldn't alloc class "sleepenabler"

AppleACPIPU: Processor Id=1 localapic Id=0 Enabled

AppleACPIPU: Processor Id=2 localapic Id=1 Enabled

AppleACPIPU: Processor Id=3 localapic Id=2 Enabled

AppleACPIPU: Processor Id=4 localapic Id=3 Enabled

Calling mp0_policy_init for Quarantine

Security policy loaded: Quarntine policy (Quarantine)

Calling mpo_policy_init for Sandbox

Security policy loaded: Seatbelt sand box policy (Sandbox)

Calling mpo_policy_init for TMSafety Net

Security policy loaded: Safety net for time Machine (TMSafety Net)

copyright © 1986, 1989, 1991, 1993

the Regents of the university of california. all rights reserverd

 

MAC Framework Successfully Initialzed

using 16384 buffer headers and 4096 cluster IO buffer headers

IOAPIC: Version 0x20 Vectors 64:87

ACPI: system state [s0 s3 s4 s5] (s3)

RTC: Only single Ram bank (128 bytes)

Netkas presents fakesmc, a kext witch emulates smc device

Evoenabler: Probing.

Firewire runtime power conservation disabled. (2)

From path:"UUID"'

Waiting for boot volume with UUID F2CE758C-8733-3CC0-80FF-8269CCDA8535

waiting on<dict ID="0"><key>IOProviderClass</key><string ID="1">IOResourceMatch</key><string ID="2">bo

ot-uuid-Media</string></dict>

com.apple.AppleFSCompressionTypeZlib load succeded

Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/CHN1@1/IOAHCIdevice@0/AppleAHCIDISK

Driver/IOAHIBlockStorageDevice/IOBlocksStorageDriver/ST31000340AS media/IOFDISKPartitionScheme/Untitled 1@1

BSD root: disk1s1, major 14, minor 4

FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001e8c0001c57cf4; max speed s400.

com.apple. launchd1 com.apple.launchd1 ***Launchd[1] has started up***

Singleuser boot -- fsck not done

Root device is mounted Reed-only

 

If you want to make modification to files:

/sbin/fsck -fy

/sbin/mount -uw /

 

If you wish to boot the system:

exit

:/ Root# ERROR; FireWire unable to determine security-mode: defaulting to full secure

 

 

 

 

 

 

 

if anyone could help me or point me in the right direction that would be wkd ;)

Link to comment
Share on other sites
  • 1 month later...
MaLd0n
MaLd0n
Posted
Posted

com.apple.drive.AppleFWOHCI

 

---> iofirewirefamily.kext/contents/plugins/iofirewirefamily.kext.kext

 

if you are able to install and then gets KP

 

so try

 

Give the boot from the installation dvd and go in the terminal

 

cd /Volumes/YOUR-VOLUME-NAME/System/Library/Extensions

rm –rf iofirewirefamily.kext

Link to comment
Share on other sites
  • 6 months later...
woca1995
woca1995
Posted
Posted
hi their its my first post so please go ez on me (lol) and yes im a TOTAL NOOB!

 

 

 

ok i did a little research on how to do this only bad thing my first reserach was done on youtube, maybe this is where i went wrong to start with? anyway iv D/L hazards 10.6.2 and tryed to install it but after install when its time to boot up my pc shuts down (not even a restart????) but it installed without a hitch from what i can tell

 

(i dont really get to see what the error is before it shuts it self off coz its so quick :) )

 

something about firewire at the end of line from i could tell

 

hears my setup anyway:

 

Cpu: Q9550 2.83

 

MoBo: P5Q Pro

 

Display: Radeon hd 4650 - (i did find some driver or kext for this but i dont have a clue on how to install it)

 

Ram: 8500cs 6gb

 

Hdd: 1/ Samsung hd103uj 1tb 2/ Maxtor ST31000340as 1tb - iv got partitons on both drives 500gb (that was under my xp and windows 7 install, witch i reformatted the win7 to install osx86 hazard on just to let u know)

i have the same problem, please help, i have a AMD processor

 

 

also i done a safe mode start and this is what i got:

 

 

 

 

 

Kext sk.triaxis.kext.sleepenabler failed to load (0xdc00800e).

failded to load kext sk.traixis. kext.sleepenabler (error 0xdc00800e).

NullCPUPowerManagement::init: Properties= 0xa4588c0

Couldn't alloc class "sleepenabler"

AppleACPIPU: Processor Id=1 localapic Id=0 Enabled

AppleACPIPU: Processor Id=2 localapic Id=1 Enabled

AppleACPIPU: Processor Id=3 localapic Id=2 Enabled

AppleACPIPU: Processor Id=4 localapic Id=3 Enabled

Calling mp0_policy_init for Quarantine

Security policy loaded: Quarntine policy (Quarantine)

Calling mpo_policy_init for Sandbox

Security policy loaded: Seatbelt sand box policy (Sandbox)

Calling mpo_policy_init for TMSafety Net

Security policy loaded: Safety net for time Machine (TMSafety Net)

copyright © 1986, 1989, 1991, 1993

the Regents of the university of california. all rights reserverd

 

MAC Framework Successfully Initialzed

using 16384 buffer headers and 4096 cluster IO buffer headers

IOAPIC: Version 0x20 Vectors 64:87

ACPI: system state [s0 s3 s4 s5] (s3)

RTC: Only single Ram bank (128 bytes)

Netkas presents fakesmc, a kext witch emulates smc device

Evoenabler: Probing.

Firewire runtime power conservation disabled. (2)

From path:"UUID"'

Waiting for boot volume with UUID F2CE758C-8733-3CC0-80FF-8269CCDA8535

waiting on<dict ID="0"><key>IOProviderClass</key><string ID="1">IOResourceMatch</key><string ID="2">bo

ot-uuid-Media</string></dict>

com.apple.AppleFSCompressionTypeZlib load succeded

Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/CHN1@1/IOAHCIdevice@0/AppleAHCIDISK

Driver/IOAHIBlockStorageDevice/IOBlocksStorageDriver/ST31000340AS media/IOFDISKPartitionScheme/Untitled 1@1

BSD root: disk1s1, major 14, minor 4

FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 001e8c0001c57cf4; max speed s400.

com.apple. launchd1 com.apple.launchd1 ***Launchd[1] has started up***

Singleuser boot -- fsck not done

Root device is mounted Reed-only

 

If you want to make modification to files:

/sbin/fsck -fy

/sbin/mount -uw /

 

If you wish to boot the system:

exit

:/ Root# ERROR; FireWire unable to determine security-mode: defaulting to full secure

 

 

 

 

 

 

 

if anyone could help me or point me in the right direction that would be wkd :P

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...