IscreaMan Posted September 21, 2009 Share Posted September 21, 2009 Hi. I have a fully working Vanilla 10.6.1 on my old GA-945P-S3 (rev. 1.0) board with only 1 kext - fakesmc and latest Chameleon 2.0 RC3. My mainboard has Realtek 8111B Gigabit Ethernet controller, but i have also similar second realtek NIC on PCI slot. They are both handled by AppleRTL8169Ethernet extension. Both cards work great out of the box, but only without using patched DSDT.aml. When i do some patching (for CMOS fix and Geforce 8800GT entry) i have this error on boot and my PCI networking card doesn't work anymore. 9/21/09 5:33:29 PM kernel AppleRTL8169Ethernet: IOInterruptEventSource error - PCI 9/21/09 5:33:31 PM kernel AppleRTL8169Ethernet: Ethernet address 00:2a:4d:27:76:71 - Built-in No mater if i do network DSDT patching or NOT - PCI card does not work. Even one single patch for CMOS fix (which is a must-have!) gives this error. Thanks for any help in advance! Link to comment https://www.insanelymac.com/forum/topic/188012-iointerrupteventsource-on-applertl8169ethernet-pci-only-when-using-dsdtaml/ Share on other sites More sharing options...
SkipG Posted September 21, 2009 Share Posted September 21, 2009 When i do some patching (for CMOS fix and Geforce 8800GT entry) i have this error on boot and my PCI networking card doesn't work anymore. 9/21/09 5:33:29 PM kernel AppleRTL8169Ethernet: IOInterruptEventSource error - PCI 9/21/09 5:33:31 PM kernel AppleRTL8169Ethernet: Ethernet address 00:2a:4d:27:76:71 - Built-in Sounds like you have the same problem I had. Try moving the network card to a different slot. Link to comment https://www.insanelymac.com/forum/topic/188012-iointerrupteventsource-on-applertl8169ethernet-pci-only-when-using-dsdtaml/#findComment-1275499 Share on other sites More sharing options...
kitmac Posted October 17, 2009 Share Posted October 17, 2009 Solved.......... Found the solution by translating some russian hackintosh site Remove AppleHPET/ AppleIntelCPUPowerManagement and / AppleIntelCPUPowerManagementClient Back them up just in case........!!!! Link to comment https://www.insanelymac.com/forum/topic/188012-iointerrupteventsource-on-applertl8169ethernet-pci-only-when-using-dsdtaml/#findComment-1301305 Share on other sites More sharing options...
sadrobot Posted March 25, 2010 Share Posted March 25, 2010 I'm so pleased you figured this out, because I've just bought a TP-Link branded 8169 today in the hope of using it in my hackintosh only to run into this iointerrupteventsource problem. I moved the kexts you've mentioned, rebuilt the cache and rebooted and now I'm back online. Phew! Thanks! Link to comment https://www.insanelymac.com/forum/topic/188012-iointerrupteventsource-on-applertl8169ethernet-pci-only-when-using-dsdtaml/#findComment-1434405 Share on other sites More sharing options...
Quoc Huy Posted October 12, 2011 Share Posted October 12, 2011 Excellent! I killed my motherboard trying to flash the firmware and changed to another one. Since then my ethernet card wasn't recognised because of the same issue. I did what you said and that fixed it. Thank you! Link to comment https://www.insanelymac.com/forum/topic/188012-iointerrupteventsource-on-applertl8169ethernet-pci-only-when-using-dsdtaml/#findComment-1758758 Share on other sites More sharing options...
LatinMcG Posted October 14, 2011 Share Posted October 14, 2011 Hi. I have a fully working Vanilla 10.6.1 on my old GA-945P-S3 (rev. 1.0) board with only 1 kext - fakesmc and latest Chameleon 2.0 RC3. My mainboard has Realtek 8111B Gigabit Ethernet controller, but i have also similar second realtek NIC on PCI slot. They are both handled by AppleRTL8169Ethernet extension. Both cards work great out of the box, but only without using patched DSDT.aml. When i do some patching (for CMOS fix and Geforce 8800GT entry) i have this error on boot and my PCI networking card doesn't work anymore. 9/21/09 5:33:29 PM kernel AppleRTL8169Ethernet: IOInterruptEventSource error - PCI 9/21/09 5:33:31 PM kernel AppleRTL8169Ethernet: Ethernet address 00:2a:4d:27:76:71 - Built-in No mater if i do network DSDT patching or NOT - PCI card does not work. Even one single patch for CMOS fix (which is a must-have!) gives this error. Thanks for any help in advance! dsdt has irq conflict or needs _OSID for Darwin faking to be Windows 2006 also try Lnx2Mac driver check this out too http://www.insanelymac.com/forum/index.php?showtopic=206313 Excellent!I killed my motherboard trying to flash the firmware and changed to another one. Since then my ethernet card wasn't recognised because of the same issue. I did what you said and that fixed it. Thank you! recover original bios and check mac address for proper numbers. Link to comment https://www.insanelymac.com/forum/topic/188012-iointerrupteventsource-on-applertl8169ethernet-pci-only-when-using-dsdtaml/#findComment-1760125 Share on other sites More sharing options...
Recommended Posts